1. Introduction
The NEXIQ 3 USB-Link N3 is an advanced diagnostic tool designed for heavy-duty, light-duty, and medium-duty trucks, as well as construction equipment. This full-chip device supports the latest protocols, including CAN FD and DoIP, and offers broad compatibility with a wide range of OEM diagnostic software. It provides reliable performance and technology for efficient vehicle maintenance and troubleshooting.
This manual provides essential information for setting up, operating, maintaining, and troubleshooting your USB-Link N3 diagnostic tool. Please read it thoroughly before use.
2. Features
- Supports Windows XP and Windows 7 (32-bit and 64-bit) operating systems. Note: Volvo, Hino, Perkins, Cat, and Nissan software must be used on Windows XP. Other software can be used on Windows 7 32-bit.
- Functions comparably to original Nexiq devices.
- Compatible with applications that diagnose engines, transmissions, ABS, instrument panels, and more.
- Reduces reprogramming times through direct USB connection.
- Offers mixed fleet capabilities with broad protocol support.
- Provides quick access to vehicle data for maintenance or management reports.
- Quickly attaches to the vehicle's diagnostic connector.
- Increases flexibility and portability for use with desktop PCs or laptops.
- Supports the latest software PPT2.8.150.
3. Package Contents
The USB-Link N3 diagnostic tool package typically includes the following items:
- 1 x USB-Link 3 adapter
- 1 x 404032 USB cable
- 1 x 493128 9-pin Deutsch adapter
- 1 x 491113 OBD2 adapter


4. Setup
4.1 Software Installation
The diagnostic tool comes with a software CD. It is crucial to follow these guidelines for software installation:
- The provided CD contains older Nexiq software. If you have the latest version of the software, it can support newer truck models.
- For Volvo, Hino, Cat, and Nissan software, install them exclusively on Windows XP. Other vehicle software can be installed on Windows 7.
- Before installing the Nexiq software from the CD, it is recommended to reinstall your computer system to prevent potential damage to the multiplexer.
- If you change the time on your laptop, Cummins Inline software may lock. Download the 'how-to-unlock-cummins-inline' file to resolve this issue.
4.2 Hardware Connection
- Connect the USB-Link 3 adapter to your computer using the provided USB cable.
- Select the appropriate diagnostic cable (e.g., 9-pin Deutsch adapter, OBD2 adapter) for your vehicle.
- Connect the diagnostic cable to the USB-Link 3 adapter.
- Locate the diagnostic port on your vehicle and connect the other end of the diagnostic cable.

5. Operating Instructions
- Ensure all connections between the USB-Link N3, your computer, and the vehicle are secure.
- Turn on your vehicle's ignition (do not start the engine unless required by the diagnostic software).
- Launch the diagnostic software on your computer.
- Follow the on-screen prompts within the software to establish communication with the vehicle.
- Perform desired diagnostic functions such as reading fault codes, viewing live data, or performing system tests.
- After completing diagnostics, safely disconnect the tool by closing the software, turning off the vehicle's ignition, and then unplugging the cables.
6. Compatibility
6.1 API Support
- RP1210A, RP1210B
- J2534-2
- USB vehicle-to-PC connectivity
- XTruck USB link supports Windows XP and Windows 7 (32-bit and 64-bit) and Windows CE compliant.
6.2 Protocol Coverage
- CAN: J1939/CAN125/CAN250/CAN500/CAN1000
- 2nd CAN: J1939/CAN125/CAN250/CAN500/CAN1000
- J1587/J1708 J1850 J2534
- ISO 15765 (Diagnostic CAN)
- ISO 14230 (KWP2000 over ISO9141) ALDL ATEC 160 (160 baud)
6.3 Supported Vehicle Types
The NEXIQ 3 supports Heavy-Duty, Light-duty, and Medium-Duty Trucks, as well as Construction Equipment (e.g., Wheel loaders, Articulated Haulers, Excavators), and Gensets.
6.4 Included Software & Applications
The package includes software for various manufacturers:
- Allison
- Bendix 6.3.8.0
- Detroit Diesel DDDL 7.05, DDCT, Calibration Tool
- Eaton Service Ranger 3.2
- International DLB, ICAP, IPTS, NETS, IPC, Master Diagnostic
- Meritor and Wabco Diagnostics
- Cummins Insite 7.5
- Hino 2.0.2
- Caterpillar 2.0.1.0
- Perkins EST 2010B
- V Macks 2.6.12, V Macks Dealer Pro
- Volvo VCADS 2.35.10
- Toyota Techstream (for car)
6.5 Free Heavy-Duty Truck Diagnostic Applications
The tool supports a wide range of applications for various truck and equipment brands:
- VOLVO TRUCK: FM10, NH565, FH12, FM12, VHD, FH16, FM7, VN, WC, WG, WI, FH565, NH12, FL6, FL7, FL10, FL12, NH525, WX, COMP04, FE, VHD, FH, FM, VM, FM9, F10, F12, F16, NL10, NL12.
- VOLVO BUSES: B10B, B10M, B10L, B10R, M10R, B12, B58, B6, B7R, OLYMPIAN, SUPEROLY.
- VOLVO BUS: B12B, B12M, B12R, B6R, B7L, B7R, B9L, B9R, B9S, B9TL, PREVH, PREVX.
- MACK TRUCKS: V-MAC I, V-MAC II, V-MAC III, V-MAC IV, Service Diagnostic.
- VOLVO CONSTRUCTION EQUIPMENT (CE):
- Wheel loader: L110E, L110F, L120E, L120F, L150E, L150F, L180E, L180F, L220E, L220F, L330E, L350F, L60E, L60F, L70E, L70F, L90E, L90F.
- Articulated Hauler: A25D, A25E, A30D, A30E, A35D, A35E, A40D, A40E, T450D.
- Excavator: EC135B, EC140B, EC140C, EC160B, EC160C, EC180B, EC180C, EC210B, EC210C, EC235C, EC240B, EC240C, EC290B, EC290C, EC330B, EC330C, EC360B, EC360C, EC460B, EC460C, EC700C, EC700B, EC700C, ECR145C, ECR235C, ECR305C, EW140B, EW140C, EW145B, EW145C, EW160B, EW160C, EW180B, EW180C, EW200B, EW210C, FC2121C, FC2421C, FC2924C, FC3329C, PL4611.
- Grader: G710B, G720B, G726B, G730B, G740B, G746B, G780B, G930, G940, G946, G960, G970, G976, G990.
- Navistar: ALL Diamond Logic Builder (DLB) ServiceMaxx.
- International: ALL Intune, MD32.
- Freightliner: ALLServiceLink: cascadia, century, columbia, Coronado, classic, FLDSD, 4900FA, 4900SA, 4900EX.
- HINO:ENGINE: 300SERIES, 500 SERIES, CR03_J08E, CR03_J05D, COMMONRAIL (J05E), J05D_US, J08E_US, P11C, VCS, Hibrid, Inverter, Brake(ABS), AT_45043LE.
- ISUZU_GMC: 1996-1999 NPR Diesel and F Series Include NPR/W 3500, NPR HD/W 4500, (6.0L V-8 Gasoline Engines only), 7.8L 6HK1 Engine.
- Isuzu: NPR, NPR HD, NQR, NRR, FTR, FVR, FXR with 6HK1 LG4 Engine, NPR, NPR HD, NQR, NRR with 5.2L (4HK1) or 3.0L (4JJ1) Diesel engine. 6.0L V-8 Gasoline Engine.
- GM: W3500, W4500, W5500, WT5500, W5500 HD, with 5.2L Diesel Engine Only, T6500, T7500, T8500.
- Future Updates: SCANIA VEHICLE, KOMATSU excavator, and MAN vehicle will be updated.
7. Maintenance
- Keep the diagnostic tool and cables clean and free from dust, dirt, and moisture.
- Store the device and accessories in its protective case when not in use to prevent damage.
- Avoid exposing the device to extreme temperatures or direct sunlight.
- Regularly check cables for any signs of wear or damage. Replace damaged cables immediately.
- Do not attempt to open or modify the device, as this will void the warranty and may cause damage.
8. Troubleshooting & Cautions
8.1 Important Cautions
- The multiplexer cannot be updated. Attempting to update it will cause damage.
- For Volvo, Hino, Cat, and Nissan software, ensure installation is on Windows XP only. Other vehicle software can be installed on Windows 7.
- If Cummins Inline software locks due to a laptop time change, download the provided 'how-to-unlock-cummins-inline' file to resolve the issue.
- Before installing the Nexiq software CD, it is strongly recommended to reinstall your computer system first. Failure to do so may damage the multiplexer.
8.2 Common Issues
If you encounter issues, please refer to the following:
- Connection Problems: Ensure all cables are securely connected and the vehicle's ignition is on. Verify that the correct drivers are installed for the USB-Link N3.
- Software Not Launching: Check operating system compatibility (XP for specific software, Win 7 for others). Ensure antivirus software is not blocking the diagnostic application.
- No Communication with Vehicle: Confirm the correct diagnostic cable is used for the vehicle model. Check the vehicle's diagnostic port for power or damage.
For more detailed instructions, please refer to the User Manual (PDF) if available.
9. Specifications
| Attribute | Value |
|---|---|
| Communication Interface | Bluetooth |
| Battery Included | Yes |
| Wireless Support | No |
| Special Features | Bluetooth |
| Software Update | No (Multiplexer cannot be updated) |
| Item Type | Code Readers & Scan Tools |
| Item Weight | 2.5 kg |
| Origin | Mainland China |
| Supported Protocols | CAN FD, DoIP, J1939, J1587/J1708, J1850, J2534, ISO 15765, ISO 14230 (KWP2000) |
| Supported OS | Windows XP, Windows 7 (32-bit/64-bit), Windows CE |
10. User Tips
- This product features a 'full chip' design and supports the latest PPT2.8.150 software, offering enhanced performance compared to standard chip versions.
- Always ensure your vehicle's battery voltage is within the acceptable range for diagnostic tools (typically 12V or 24V for trucks) before connecting to prevent damage to the device or vehicle electronics.
- For optimal performance and to avoid software conflicts, consider using a dedicated computer for your diagnostic software installations, especially for older operating systems like Windows XP.
11. Warranty and Support
The product comes with a 1-year after-sales warranty and online support. Technical support is available, and most products are eligible for remote assistance if you encounter any problems during use. You can contact customer service for help.
Contact Information:
- Email: 3863120297@qq.com