MCHOSE K99 V3

Contents

MCHOSE K99 V3 Wireless Mechanical Keyboard User Manual

Model: K99 V3

Brand: MCHOSE

1. Product Overview

The MCHOSE K99 V3 is a 98% layout mechanical keyboard featuring a full numpad, designed for a balanced experience in both efficient work and responsive gaming. It offers precise keystrokes and comfortable long-session typing.

Key features include a multifunction control knob, advanced gaming functions, tri-mode connectivity, proprietary ultra-low power architecture, and customizable RGB lighting.

MCHOSE K99 V3 Keyboard Features Overview
Figure 1: Overview of MCHOSE K99 V3 key features including dual 8K polling rate, 0.125ms latency, 2500h battery life, 360° ARGB lighting, and multifunction control knob.

2. Package Contents

Please check the package for the following items:

  • MCHOSE K99 V3 Wireless Mechanical Keyboard
  • USB Type-C Cable
  • Keycap/Switch Puller
  • Additional Switches (if included with specific variant)
  • Dust Cover
  • User Manual (this document)

3. Setup Guide

The K99 V3 keyboard supports three connection modes: Wired (USB-C), 2.4GHz Wireless, and Bluetooth (BT).

3.1. Wired Connection

  1. Locate the mode switch on the keyboard and set it to the [OFF] position.
  2. Connect one end of the included USB Type-C cable to the keyboard's Type-C port.
  3. Plug the other end of the USB cable into an available USB port on your computer. The keyboard will be ready for use.

3.2. 2.4GHz Wireless Connection

  1. Locate the mode switch on the keyboard and set it to the [2.4G] position.
  2. Remove the 2.4G USB receiver from its storage slot on the keyboard or press to eject it.
  3. Plug the 2.4G USB receiver into an available USB port on your computer. The keyboard should connect automatically.

Note on Re-pairing 2.4G: If the 2.4G connection is lost or needs to be re-established, press and hold [FN + -] for approximately 3 seconds. The indicator light will flash rapidly. Insert the receiver into the computer's USB port. Pairing is successful when the indicator returns to normal. (The keyboard is factory-paired by default).

3.3. Bluetooth Wireless Connection

  1. Locate the mode switch on the keyboard and set it to the [B] position.
  2. To connect to Wireless 1, press the key combination [FN + 1!] and hold for about 3 seconds to enter pairing mode.
  3. On your device (computer, tablet, etc.), search for Bluetooth devices and select “MCHOSE K99 V3-1”.
  4. Once connected, the normal lighting effect will resume.

Note on Multiple Bluetooth Devices: The connection method for Wireless 2 and Wireless 3 is the same as Wireless 1. Press [FN + 2@] to switch to Wireless 2, and [FN + 3#] to switch to Wireless 3.

Tri-Mode Connectivity Icons
Figure 2: Icons representing Tri-Mode Connectivity: Bluetooth, Wired USB-C, and 2.4GHz Wireless.
K99 V3 Quick Handy Guide for Connections and Functions
Figure 3: Quick Handy Guide illustrating connection methods and function key combinations.

3.4. Software Installation (MCHOSE M HUB)

For full customization of lighting effects, key mapping, performance tools, and onboard profile management, download the MCHOSE M HUB software. It is available for both Web and desktop platforms and is compatible with Windows and macOS.

MCHOSE M HUB Software Interface
Figure 4: The MCHOSE M HUB software interface, showing connected devices and customization options.

4. Operating Instructions

4.1. Basic Keyboard Functions

  • Typing: Use the standard QWERTY layout for text input.
  • Numpad: The integrated numpad provides convenient numeric entry.

4.2. Multifunction Control Knob

The rotary knob offers intuitive control:

  • Volume Control: Rotate the knob to adjust system volume.
  • One-Key Mute: Press the knob to mute/unmute audio.
  • One-Touch Wake: Press the knob to wake the keyboard from sleep mode.
  • Customizable Functions: Further functions can be assigned via the MCHOSE M HUB software.
Multifunction Control Knob Detail
Figure 5: Close-up view of the multifunction control knob and its associated functions.

4.3. Function Key Combinations (FN Key)

The FN key, combined with other keys, provides access to various system and keyboard-specific functions:

Combination Function
FN + ASwitch to Windows system (Default)
FN + SSwitch to Mac system
FN + DELBacklight Mode Switch
FN + 6Indicator Speed +
FN + 4Indicator Speed -
FN + =Backlight Color Switch
FN + [Backlight Speed +
FN + ]Backlight Speed -
FN + BBattery Level Check (in 2.4G / Wireless Mode)
FN + Right ShiftBacklight On / Off
FN + Up ArrowBacklight Brightness +
FN + Down ArrowBacklight Brightness -
FN + Left ArrowAmbient Light Brightness +
FN + Right ArrowAmbient Light Brightness -
FN + HomeAmbient Light Color Switch
FN + EndAmbient Light Effect Mode Switch
FN + Page UpAmbient Light Speed +
FN + Page DownAmbient Light Speed -
FN + 8Indicator Brightness +
FN + 2Indicator Brightness -
FN + 0Indicator Color Switch
FN + HomeIndicator Mode Switch
FN + WINLock / Unlock Windows Key
FN + ESC (hold 3s)Restore factory settings

4.4. Advanced Gaming Functions

The K99 V3 supports advanced gaming functions configurable via the MCHOSE M HUB software:

  • SOCD: Simultaneous Opposite Cardinal Directions.
  • MT: Magnetic Trigger.
  • TGL: Toggle.
  • CB: Continuous Blade.
Advanced Key Functions for Gaming
Figure 6: Visual representation of advanced key functions like TGL, MT, and CB.

4.5. Lighting Customization

The keyboard features immersive RGB lighting with a 360° surround light strip and per-key RGB. Customize lighting effects, colors (16.8M options), and music sync via the MCHOSE M HUB software.

Surround RGB Light Strip
Figure 7: The keyboard's surround RGB light strip, enhancing the aesthetic.

5. Maintenance

5.1. Cleaning

  • Use a soft, dry cloth to wipe the keyboard surface.
  • For deeper cleaning, use the provided keycap puller to remove keycaps and clean dust or debris with compressed air or a small brush.
  • Avoid using harsh chemicals or abrasive materials that could damage the keyboard finish or keycap legends.

5.2. Battery Care

  • The keyboard is equipped with a 10,000mAh battery. For optimal battery life, avoid fully discharging the battery frequently.
  • Charge the keyboard using the provided USB Type-C cable.
  • If storing the keyboard for an extended period, charge it to approximately 50% to prevent battery degradation.
Ultra-Low Power Technology and Battery Life
Figure 8: Illustration of the keyboard's ultra-long battery life (up to 2,500 hours) and optimized low-power technology.

5.3. Switch Replacement

The K99 V3 features hot-swappable switches, allowing for easy replacement without soldering. Use the provided switch puller to carefully remove switches and insert new compatible 3-pin or 5-pin mechanical switches.

Gasket Structure Layers
Figure 9: Exploded view showing the 6-layer gasket structure and internal components for enhanced typing feel.

6. Troubleshooting

  • Keyboard not responding:
    • Ensure the keyboard is charged or connected via USB-C.
    • Check the mode switch (OFF, 2.4G, B) is set correctly for your desired connection.
    • For wireless connections, ensure the receiver is properly plugged in or Bluetooth is paired.
    • Try restarting your computer or reconnecting the keyboard.
  • 2.4GHz Wireless connection issues:
    • Re-pair the 2.4G receiver by holding [FN + -] for 3 seconds, then reinserting the receiver.
    • Ensure the receiver is not obstructed and is close to the keyboard.
  • Bluetooth pairing issues:
    • Ensure the keyboard is in Bluetooth pairing mode ([FN + 1!/2@/3#] for 3 seconds).
    • Remove previous keyboard entries from your device's Bluetooth settings and try pairing again.
  • Keys not registering or double-typing:
    • Check if the switches are properly seated. If not, use the switch puller to re-seat them.
    • Consider replacing faulty switches if the issue persists.
  • Lighting not working or incorrect:
    • Adjust lighting modes and brightness using FN key combinations (see Section 4.3).
    • Check lighting settings in the MCHOSE M HUB software.
  • Factory Reset: If you encounter persistent issues, you can restore the keyboard to its factory settings by pressing and holding [FN + ESC] for approximately 3 seconds.

7. Specifications

Feature Detail
ModelK99 V3
Layout98 Keys (98% Layout)
ConnectivityBluetooth Wireless (BT 5.0), USB (USB-C), 2.4G Wireless
Operation StyleMechanical
SwitchesIcy Creamsicle Switch (factory-lubed)
Operating Force42 ±10 gf
Pre-Travel1.3 ±0.4 mm
Total Travel3.5 ±0.3 mm
Polling RateDual 8K (Wired / 2.4GHz)
Latency0.125ms
Battery Capacity10,000mAh
Battery LifeUp to 2,500 hours (lights off)
LightingSouth-Facing RGB, 360° SOFTLIGHT, Surround RGB Light Strip
Keycaps EngravingFront Engraved (Black Gold, Nova White, Sky Blue, Horizon Orange, Glacier Gradient), Side Engraved (Mountains Gradient, Pink Gradient)
Keycaps ProfileMDA (Black Gold, Nova White, Sky Blue, Horizon Orange, Glacier Gradient), Cherry (Mountains Gradient, Pink Gradient)
BackplateAnodized (Black Gold, Nova White, Sky Blue, Horizon Orange, Glacier Gradient), PVD Mirror (Mountains Gradient, Pink Gradient)
StructureGasket Mount / Hot-Swappable / N-Key Rollover
Internal FoamPoron + IXPE + PET + Anti-Static + Silicone Gaskets
PlatePC Flex-Cut (Black Gold, Nova White, Sky Blue, Horizon Orange, Glacier Gradient), FR4 (Mountains Gradient, Pink Gradient)
Advanced FunctionsSOCD / MT / TGL / CB
DriverMCHOSE M HUB (Web & Desktop)
Weight~1277g
Supported OSWindows / macOS
Dimensions (L x W x H)399mm x 150mm x 47mm (max) / 19mm (min)
MCHOSE K99 V3 Keyboard Dimensions
Figure 10: Dimensions of the MCHOSE K99 V3 keyboard.
Icy Creamsicle Switch Specifications
Figure 11: Detailed specifications for the Icy Creamsicle Switch, including operating force, pre-travel, and total travel.

8. Warranty and Support

For detailed warranty information and customer support, please refer to the official MCHOSE website or contact the MCHOSE Official Store where you purchased the product. A comprehensive user manual in PDF format may also be available for download from the seller's product page or official website.

For additional information, you may consult the PDF user manual available at: MCHOSE K99 V3 User Manual (PDF).

9. User Tips

  • Maximize Customization: Utilize the MCHOSE M HUB software to its full potential. Experiment with different key mappings, macro settings, and RGB lighting effects to personalize your typing and gaming experience.
  • Optimize Connectivity: Choose the connection mode that best suits your needs. For competitive gaming, the 2.4GHz wireless or wired connection offers the lowest latency. Bluetooth is convenient for multi-device use and general productivity.
  • Regular Cleaning: Keep your keyboard clean to ensure longevity and optimal performance. Dust and debris can affect switch performance and overall aesthetics.
  • Battery Management: Monitor the battery level using the [FN + B] combination to avoid unexpected power loss during use.
Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.