VENUSWING L027 LED Music Sound Control Car Ambient Light User Manual

1. Introduction

Thank you for choosing the VENUSWING L027 LED Music Sound Control Car Ambient Light. This device combines decorative lighting with aromatherapy, enhancing your vehicle's interior ambiance or desktop setup. Please read this manual carefully before use to ensure proper installation, operation, and maintenance.

Image: The L027 device, highlighting its aromatherapy and atmosphere light features.

2. Safety Warnings and Precautions

• Children Safety: Keep the device and its cord out of reach of children under 3 years old. Keep away from children unless supervised by an adult.
• Intended Use: Do not use this product for purposes other than its intended use (decorative and aromatherapy light).
• Inspection: Inspect the product before each use; do not use if damaged.
• Installation & Operation: Follow installation and operation guidelines to avoid injury.
• Moisture: Do not expose to water or moisture. Do not immerse in water or use in conditions with humidity above 90%.
• Handling: Handle with care to avoid cuts or injuries.
• Placement: Keep the diffuser away from water and oil stains to prevent material damage or pad failure.
• Fragrance Contact: Keep out of reach of children to prevent accidental ingestion. If skin/eye contact with fragrance occurs, rinse immediately with clean water.
• Power Supply: Do not connect to a power supply higher than 5V to avoid damaging the motherboard.
• Installation Force: Do not forcefully pry the vent grille during installation to prevent damage to vehicle interior trim.

3. Package Contents

Please check the package for the following items:

• 1x L027 Pickup Light
• 1x Lanyard
• Aromatherapy tablets (Ocean scent)
• 1x Base (for desktop use)
• 1x Iron sheet with adhesive backing (for magnetic mounting)
• 1x Car air outlet clip
• 1x Type-C Charging cable

Image: All components included in the package.

4. Setup and Installation

4.1. Installing Fragrance Disc

1. Remove the diffuser body and the cover plate.
2. Insert the aromatherapy disc into the built-in slot.
3. Secure the disc by reattaching the cover plate.

4.2. Car Air Vent Installation

1. Attach the car air outlet clip to the back of the L027 device.
2. Pinch both sides of the diffuser clips.
3. Gently insert the clips into your car's air vent grille.
4. Ensure it snaps securely without wobbling.

Image: The device is suitable for various air vent types (horizontal, vertical, irregular).

4.3. Desktop or Magnetic Installation

1. For desktop use, attach the device to the provided base.
2. For magnetic mounting, attach the iron sheet with adhesive backing to a desired surface, then the device will magnetically adhere to it.

Image: The device features strong magnetic adsorption for easy placement.

4.4. Charging the Device (Rechargeable Version)

Connect the provided Type-C charging cable to the device and a 5V USB power source. The green light will flash during charging and remain solid green when fully charged.

5. Operating Instructions

Image: Detailed view of the device's front, side, and back, showing control buttons and interfaces.

• Power On/Off: Long press the 'Power switch' button.
• Mode Switching: Press the 'Mode switching' button to cycle through various dynamic lighting modes. There are not less than 8 modes (MODE/SPEED).
• Color Switching: Short press the 'Color switching' button to change colors. There are at least ten color modes (COLOR/BRIGHT).
• Voice Control: The built-in highly sensitive microphone enables the lights to react to music and sounds, creating audiovisual synchronous heart movement.
• Aromatherapy: The fragrance is released discreetly. Adjust the diffuser's orientation and turn on your car's air conditioning (cool or warm air) to accelerate fragrance dispersion and control scent intensity.

Image: Examples of various dynamic lighting modes available.

Image: Illustrates the 360° global fragrance expansion, ensuring scent reaches all areas.

6. Maintenance

6.1. Replacing Fragrance Pads

1. When the scent weakens, remove the diffuser body and open the cover.
2. Take out the old fragrance pad and discard it.
3. Insert a new fragrance pad into the slot.
4. Secure the cover and reinsert the device into the vent or base.
5. Caution: Avoid dropping pad fragments inside the vehicle during replacement.

6.2. Cleaning

To clean the device, gently wipe it with a dry or slightly damp cloth. Do not use harsh chemicals or abrasive cleaners. Ensure the device is powered off and disconnected from any power source before cleaning. Keep the diffuser away from water and oil stains.

7. Troubleshooting

• Device not responding to sound: Ensure a quiet environment when starting up to achieve the best automatic noise reduction effect.
• Device not powering on or charging: Ensure the charging cable is securely connected and the power source is 5V. Do not use power sources higher than 5V. Check for low battery (red light indicates low battery on rechargeable version).
• Fragrance not dispersing well: Adjust the diffuser's orientation, turn on your car's air conditioning (cool or warm air), and adjust the fan speed as needed to control scent intensity.
• Device feels loose after installation: Periodically check installation stability. Verify no loosening before driving to prevent dislodgement during bumps.
• Device damaged: Do not immerse in water or use in conditions with humidity above 90%. If physically damaged, discontinue use.

8. Specifications

Image: The USB Plug-in version of the L027 device.

9. User Tips

• For optimal sound reactivity, ensure the environment is relatively quiet when first powering on the device.
• Experiment with different dynamic and color modes to match your mood, music, or car interior lighting.
• Place the device strategically in your car's air vent or on your desktop for the best visual and aromatic experience.
• Keep spare aromatherapy tablets handy to ensure continuous fragrance.
• Utilize the magnetic adsorption feature for flexible placement on metal surfaces around your desk or car.

10. Warranty and Support

This product complies with EU RoHS and REACH environmental directives. The fragrance components meet EU safety standards for cosmetic products. For any issues or support inquiries, please contact your retailer or the manufacturer. Please refer to the original purchase documentation for specific warranty terms and conditions.

A PDF version of this manual may be available for download from the seller's website.