DALESIMEI Samsung Galaxy Tab A9 SM-X110 SM-X115

Contents

User Manual

DALESIMEI LCD Display Screen Touch Digitizer Assembly

For Samsung Galaxy Tab A9 (Models SM-X110, SM-X115)

1. Product Overview

This product is a replacement LCD display and touch screen digitizer assembly designed for the Samsung Galaxy Tab A9, specifically compatible with models SM-X110 and SM-X115. It includes the LCD display, touch screen digitizer, and glass, providing a complete solution for repairing damaged screens.

Front and back view of the LCD display and touch digitizer assembly for Samsung Galaxy Tab A9
Figure 1: Front and back view of the DALESIMEI LCD Display Assembly.
Detailed back view of the LCD assembly showing flex cables and connectors
Figure 2: Detailed back view of the LCD assembly, highlighting flex cables and connectors.

2. Specifications

Feature Description
Brand Name DALESIMEI
Compatible Brand SAMSUNG
Compatible Models Samsung Galaxy Tab A9 (SM-X110, SM-X115)
Product Type Tablet Touch Panel (LCD Display + Touch Screen Digitizer + Glass)
Screen Type Capacitive Screen
Display Size 8.7 inches
Quality Control Tested one by one before shipment
Warranty 12 months

3. Installation Guide

This guide provides detailed steps for replacing the LCD screen assembly. For a visual demonstration of screen testing, please refer to the video below.

Video 1: Demonstration of LCD screen testing and touch functionality.

3.1. Preparation Tools & Materials

  • Precision screwdriver set
  • Plastic pry tools / triangle picks (non-metallic)
  • Suction cup
  • Heat gun or hair dryer
  • Anti-static wristband or gloves
  • Tweezers
  • Tablet screen assembly compatible with your model (this product)
  • Screen adhesive: B7000 / T7000 glue
  • Cleaning cloth and isopropyl alcohol
  • Clamps or heavy objects for curing

3.2. Pre-Operation Steps

  1. Power off the tablet completely.
  2. Remove SIM tray or SD card if present.
  3. Lay a soft cloth on the workspace to avoid scratching the back cover.
  4. Keep screws organized and take photos for reference during disassembly.

3.3. Removing the Old Screen

  1. Heat the edges: Use a heat gun or hair dryer at low to medium heat (around 60-80°C) to warm all four sides of the screen. This softens the adhesive.
  2. Lift the screen: Attach a suction cup near one corner. Gently pull to create a small gap. Insert a plastic pry tool and slowly slide along the edge to separate the screen. Do not insert the tool too deeply to avoid damaging cables.
  3. Open the screen carefully: Lift the screen at a small angle (≤ 30°). Do not pull abruptly.
  4. Disconnect cables: Locate the display cable, touch cable, and any other connectors. Use a pry tool to flip up the retaining clips and gently unplug the cables. If required, disconnect the battery cable first to avoid short circuits.
  5. Remove the old screen completely.

3.4. Installing the New Screen

  1. CRITICAL: TEST BEFORE INSTALLATION: Connect the new screen's cables to the motherboard. Power on the tablet to test the following functions:
    • Display functionality (check for dead pixels, lines, or discoloration)
    • Touch function (ensure responsiveness across the entire screen)
    • Brightness adjustment
    • Color accuracy
    • Front camera (if applicable and connected to the screen assembly)
    Only proceed with full installation if everything works normally.
  2. Disconnect the screen again after successful testing.
  3. Clean the frame residue with isopropyl alcohol and a cleaning cloth.
  4. Apply new adhesive (B7000/T7000 glue) evenly around the frame.
  5. Reconnect the screen cables properly and secure the connectors.
  6. Place the new screen into position and press gently around the edges to ensure adhesion.
  7. Use clamps or heavy objects to hold the screen firmly. Let it cure for 1-2 hours.

3.5. Final Check

  1. Remove clamps and clean any excess glue.
  2. Reinstall all screws and components that were removed during disassembly.
  3. Power on and fully test all functions of the tablet.
  4. Do not bend or press hard on the screen for 24 hours to allow full curing of the adhesive.

4. Operating Instructions

Once installed, the LCD display and touch digitizer assembly functions as the primary interface for your Samsung Galaxy Tab A9. Operate your tablet as usual, utilizing the touch screen for navigation and interaction. Ensure all gestures and touch points respond correctly after installation.

5. Maintenance

  • Keep the screen clean using a soft, lint-free cloth. Avoid abrasive materials.
  • For stubborn smudges, lightly dampen the cloth with water or a screen-specific cleaner.
  • Avoid exposing the screen to extreme temperatures or direct sunlight for prolonged periods.
  • Protect the screen from impacts and scratches by using a screen protector and a protective case.

6. Troubleshooting

  • Display not working or showing lines: Recheck all flex cable connections. Ensure they are seated correctly and securely. If the issue persists, the screen might be faulty.
  • Touch screen unresponsive: Verify the touch digitizer flex cable connection. Perform a hard reset of the tablet. If unresponsive areas persist, the digitizer may be faulty.
  • Screen flickering: Ensure all connections are firm. This could also indicate a faulty screen or a loose connection to the motherboard.
  • Backlight issues (too dim/bright, uneven): Check the display flex cable. This can sometimes be related to software settings or a faulty backlight component within the screen assembly.

7. Important Warnings

  • Use only a matching screen assembly for your tablet model (Samsung Galaxy Tab A9 SM-X110/SM-X115).
  • Avoid overheating the battery during the heating process to remove the old screen.
  • Do not use 502 glue or other corrosive adhesives, as they can damage the screen or tablet components. Use recommended screen adhesive like B7000 or T7000.
  • If you are inexperienced with tablet repairs, seek professional repair service to avoid further damage.
  • Working on curved, folding, or highly integrated tablets carries significant risk and should only be attempted by experienced technicians.

8. User Tips

  • Always perform a dry fit and test the new screen thoroughly before applying adhesive and fully assembling the tablet.
  • Take clear photos at each step of disassembly to aid in reassembly.
  • Keep all removed screws and small parts organized, perhaps using a magnetic mat or labeled containers.
  • Work in a clean, well-lit, and static-free environment.

9. Warranty and Support

This product comes with a 12-month warranty. If you encounter any quality problems with the product, please contact the seller for support. The seller's professional QC team checks products before shipping to ensure quality. Man-made damage is not covered under warranty, but repair services may be available for a charge.

For further assistance, you may refer to the official user manual (PDF) provided by the seller, which can be found at this link.

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.