OIMG Blackhead Remover Vacuum Suction Facial Pore Cleaner

1. Product Overview

This electric blackhead cleaner uses physical adsorption to remove blackheads, dirt, and excess oil, helping you achieve smooth, clean skin. It features strong vacuum suction, multiple replaceable probe heads, and adjustable strength levels for various skin types and needs.

Image: OIMG Blackhead Remover device highlighting its features: Strong suction, removes blackheads & grease, minimizes pores, 5 functional heads, 3 strength levels, and rechargeable.

2. Package Contents

• 1 x Main device
• 4 x Replaceable suction heads
• 1 x USB charging cable
• 1 x User manual (this document)
• 1 x Color box

Image: The OIMG Blackhead Remover device shown with its packaging box labeled 'Multifunctional Cleaning Instrument' and the four included suction heads.

3. Setup

3.1. Charging the Device

1. Connect the USB charging cable to the charging port at the bottom of the device.
2. Connect the other end of the USB cable to a compatible 5V/1A USB charger (not included) or a computer USB port.
3. A full charge takes approximately 2 hours. The device supports up to 60 minutes of continuous use on a full charge.
4. Unplug the device once fully charged to help extend battery life.

3.2. Attaching Suction Heads

1. Ensure the device is turned off.
2. Gently twist the desired suction head onto the top of the device until it is securely in place.
3. To remove, twist the suction head counter-clockwise and pull it off.

4. Operating Instructions

1. Prep Your Skin:

   Wash your face thoroughly. Then, use a warm towel or a facial steamer for 3-5 minutes to help open up your pores. This step is crucial for effective blackhead removal.

2. Choose a Suction Head:

   Select the appropriate suction head based on your skin type and the area you intend to treat:

   • Small Round Head: Ideal for sensitive areas and fine lines.
   • Medium Round Head: Suitable for general blackhead removal on the nose and cheeks.
   • Large Round Head: Designed for deep cleaning on oily areas.
   • Oval Head: Best for the T-zone and stubborn blackheads, and to promote blood circulation to reduce fine lines.
   • Microcrystalline Suction Head: Used to remove aging cutin and make skin smooth.
   

   Image: A visual guide to the 5 replaceable beauty heads, detailing their shapes and specific uses for different skin areas and concerns.

3. Adjust the Suction Level:

   Press the power button to turn on the device, then press the 'M' button to cycle through the suction levels:

   • Level 1: For sensitive skin or beginners.
   • Level 2: For daily cleaning.
   • Level 3: For stubborn blackheads and oily skin.

4. Use the Device:

   Gently glide the device slowly over your skin. Important: Do not stay in one spot for more than 3 seconds to prevent redness or bruising. Move the device in an upward and downward motion.

   

   Image: Illustrates the correct way to use the device by sliding it up and down, and warns against keeping it in one spot for too long to avoid skin discoloration.

5. Aftercare:

   After using the device, rinse your face with cold water to help close the pores. Then, apply a toner and moisturizer to soothe and hydrate your skin.

   

   Image: A three-step visual guide: 1. Open pores with steam/hot towel. 2. Use the device with a suitable head and lowest suction. 3. Cleanse face and apply toner to shrink pores.

5. Maintenance

5.1. Cleaning Suction Heads

• After each use, remove the suction head and clean it thoroughly.
• You can clean the suction heads with alcohol or soap and water. Ensure they are completely dry before storing.

5.2. Replacing the Sponge Filter

The device contains a sponge filter inside the suction head base to prevent debris from entering the main unit. Replace this sponge regularly for optimal performance and hygiene.

Image: Step-by-step visual instructions on how to remove the suction head, access the internal sponge filter, and replace it.

5.3. Storage

• Store the device and its accessories in a dry place, away from direct sunlight and extreme temperatures.
• Keep the device away from water and heat sources.

6. Troubleshooting

If the device is not turning on, ensure it is fully charged. If suction power seems weak, check that the suction head is securely attached and that the sponge filter is clean and properly placed. If issues persist, please contact customer support.

7. Specifications

8. Safety Precautions

• Do not use on broken, irritated, or sunburned skin.
• Do not use the device for more than 5 minutes per session to avoid redness or bruising.
• If you experience skin discomfort, stop using immediately and consult a dermatologist.
• Keep the device out of reach of children.

9. User Tips

• Always start with the lowest suction level and gradually increase if needed, especially if you have sensitive skin.
• Ensure your skin is well-hydrated before and after use for best results and to minimize irritation.
• Regularly clean the suction heads and replace the sponge filter to maintain hygiene and device efficiency.

10. Warranty & Support

For warranty information or technical support, please refer to the seller's policy or contact the seller directly through the platform where the product was purchased.