ICYYGO IC-24V

Contents

ICYYGO IC-24V Series DC24V LED Chip Instruction Manual

Model: IC-24V | Brand: ICYYGO

1. Product Introduction

The ICYYGO IC-24V series LED chip is a high-power LED lamp bead designed for various lighting scenarios. It features high brightness, low energy consumption, and a long operational life. This product is suitable for DIY downlights and other lighting applications requiring a round PCB board with a lens.

Overview of various ICYYGO DC24V LED chips in different sizes and wattages.
Figure 1: Overview of ICYYGO DC24V LED Chips (8W, 10W, 13W, 18W, 23W)

2. Safety Information & Precautions

  • Warning: This product must be used under direct adult supervision.
  • Prohibited: Self-disassembly is strictly prohibited. Unauthorized personnel are not allowed to attempt self-repair.
  • Do not use this product in humid or high-temperature environments.
  • Avoid direct eye exposure to the LED beam.
  • Always cut off the power supply before installation or maintenance to prevent electric shock.
  • Avoid frequent switching to extend the service life of the product.

3. Setup & Installation Instructions

  1. Preparation: First, ensure that the power supply voltage (DC24V) meets the product requirements and specifications.
  2. Disconnect Power: Before beginning installation, ensure the connected power supply is completely disconnected.
  3. Fixed Position: Install the LED lamp bead firmly in the appropriate fixture or housing.
  4. Wiring: Connect the LED chip to the DC24V power supply. Ensure correct polarity (positive to positive, negative to negative).
  5. Power On: Once installed and wired correctly, the LED chip can be used normally when connected to the power supply.
Close-up of an 8W-82MM LED chip showing wiring points.
Figure 2: Example of an 8W-82MM LED chip with wiring points (ZY-82MM-12Z W31775)
8W-82MM LED chip with red and black wires connected.
Figure 3: 8W-82MM LED chip with power wires connected

4. Operating Instructions

Once properly installed and connected to a stable DC24V power source, the LED chip will illuminate. The light output will correspond to the selected color temperature (e.g., White Light 6000K, Warm White 3000K, or Two Colors for adjustable options).

Demonstration of 6000K White Light, 4000K Natural White, and 3000K Warm White output from the LED chip.
Figure 4: Light output at different color temperatures (6000K, 4000K, 3000K)

5. Maintenance

  • Keep the LED chip and its connections clean and free from dust or debris.
  • Ensure adequate ventilation around the installation location to prevent overheating, which can shorten the product's lifespan.
  • Avoid exposing the product to extreme temperatures or high humidity.
  • Do not attempt to clean the lens with abrasive materials; use a soft, dry cloth.

6. Troubleshooting (FAQs)

Fault Phenomenon Possible Causes Solutions
Light does not light up/flashes The power is not connected or the contact is poor. Check the power supply and connecting cable. Ensure secure connections.
Overheating Poor heat dissipation. Improve the ventilation conditions of the installation location. Ensure proper airflow.
Uneven illumination Improper angle of lamp beads. Adjust the angle of the lamp beads or replace accessories if necessary.

7. Specifications

Attribute Value
Model Number IC-24V
Brand Name ICYYGO
Voltage DC24V
Power Options 8W, 10W, 13W, 18W, 23W
Color Temperature Options White light 6000K, Warm white 3000K, Two Colors (3000K & 6000K)
Size Options (Diameter) 8W-82MM, 10W-108MM, 13W-136MM, 18W-162MM, 23W-200MM
Shape Round
Light Panel Type Lens
Certification CCC
Origin Mainland China
Stack of various sized round LED chips.
Figure 5: Different sizes of ICYYGO LED chips
8W-82MM LED chip with dimensions and color temperature options.
Figure 6: 8W-82MM LED Chip Details
10W-108MM LED chip with dimensions and color temperature options.
Figure 7: 10W-108MM LED Chip Details
13W-136MM LED chip with dimensions and color temperature options.
Figure 8: 13W-136MM LED Chip Details
18W-162MM LED chip with dimensions and color temperature options.
Figure 9: 18W-162MM LED Chip Details
23W-200MM LED chip with dimensions and color temperature options.
Figure 10: 23W-200MM LED Chip Details

8. User Tips

  • For optimal performance and longevity, ensure the LED chip is installed in a fixture that allows for proper heat dissipation.
  • When connecting multiple LED chips, ensure your DC24V power supply has sufficient wattage capacity to handle the combined load.
  • Consider using a dimmer compatible with DC24V LED systems if adjustable brightness is desired.
  • Always double-check wiring polarity before applying power to prevent damage to the LED chip.

9. Warranty & Support

  • Warranty Period: Within one year from the date of purchase, defects caused by non-human factors will be eligible for replacement or refund.
  • Customer Support: For any inquiries or support needs, please contact the ICYYGO brand customer service.

For a comprehensive guide and additional documentation, please refer to the official user manual PDF: ICYYGO EDih Panel User Manual (PDF).

10. Manufacturing Process

The ICYYGO LED chips are produced in an automated production workshop, ensuring precision and quality in manufacturing. The design and assembly processes are carefully controlled to deliver reliable products.

Video 1: Overview of ICYYGO's automated production workshop and design process.
Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.