Introduction
The Coolo Zigbee IR Remote Control is a universal infrared controller designed to integrate traditional IR-controlled devices into your smart home ecosystem. It allows you to control various appliances such as TVs, air conditioners, fans, and projectors via a smart app or voice commands when paired with a compatible Zigbee gateway. Optional versions include a built-in temperature and humidity sensor for advanced smart automation.
Figure 1: Coolo Zigbee IR Remote Control and its key features.
Important Notes & Version Compatibility
This product requires a Zigbee gateway (not included in the package) to function. Please confirm your existing gateway type before selecting the corresponding version.
There are four versions of the Zigbee IR Remote Control, each with specific compatibility and features:
| Style | Internal Sensors | Protocol | Works With | Gateway |
|---|---|---|---|---|
| Type 1 (Z2M Standard) | IR Only | Z2M (Zigbee2MQTT) | MQTT only (No Smart Life/Tuya APP) | Needs Zigbee 3.0 Gateway |
| Type 2 (Z2M with T&H) | IR, Temp & Humidity | Z2M (Zigbee2MQTT) | MQTT only (No Smart Life/Tuya APP) | Needs Zigbee 3.0 Gateway |
| Type 3 (Tuya Standard) | IR Only | Tuya Zigbee | Smart Life / TUYA APP | Required Tuya Zigbee Gateway |
| Type 4 (Tuya with T&H) | IR, Temp & Humidity | Tuya Zigbee | Smart Life / TUYA APP | Required Tuya Zigbee Gateway |
Important Warnings:
- All versions require a compatible Zigbee gateway (not included).
- Z2M versions are NOT compatible with Smart Life / TUYA APP.
- Tuya Zigbee versions require Tuya Zigbee Gateway ONLY.
- Not Support Ewelink APP.
- Not Support ZHA (Zigbee home automation).
Figure 2: Detailed comparison of controller versions.
Package Contents
The package includes:
- 1 x Zigbee IR Remote Controller (selected version)
- 1 x User Manual
Figure 3: Product packaging.
Figure 4: Remote controller and included manual.
Setup
1. Power On and Network Configuration
- Push down to open the battery back cover.
- Install two AAA (LR03) batteries (not included).
- Press the RESET button for 3 seconds and release. The red LED will flash, indicating it is in network configuration mode.
- If it is a Zigbee device, it must be used in conjunction with the Zigbee gateway hub.
Figure 5: Product dimensions and reset button location.
2. Installation Instructions
Use a 3M sticker (not included) to affix the product to the desired target position, ensuring a clear line of sight to the IR-controlled appliances.
3. Adding Device to Smart Life/Tuya App (for Tuya Zigbee Version)
Before adding this device, you need to add your Smart Gateway to the Smart Life/Tuya App.
- Open the Smart Life App, select the Gateway that has already been added.
- Click "Add subdevice".
- Long press the RESET button for 5 seconds until the indicator light starts to flash.
- Ensure the device is in pairing mode (LED is blinking). Confirm the indicator is flashing in the app.
- Wait for the app to search and add the device.
- Once the device is added successfully, click "Done".
Figure 6: Steps to add the device to the Smart Life App.
4. Zigbee2MQTT Usage Instructions (for Z2M Version)
- Update Zigbee2MQTT to the latest version.
- Add this device to Zigbee2MQTT according to the network configuration instructions (see section 1).
- On the product function page in Zigbee2MQTT, click the [Study] button to enter the infrared remote control learning state; the device indicator light will stay on steadily at this time.
Figure 7: Zigbee2MQTT interface example.
Figure 8: Zigbee2MQTT settings for temperature, humidity, and battery.
Operating Instructions
1. IR Learning Function
The device supports learning 6-channel infrared power on/off codes. Only infrared remote controls with 38KHz carrier frequency are supported.
- Ensure the device indicator light stays solid on (learning mode).
- In the app (Smart Life/Tuya or Zigbee2MQTT interface), tap the switch name to enter the corresponding switch settings.
- Point the original infrared remote control at the device (about 3 cm away) and press the Power On/Off key on the remote.
- The device indicator light will flash rapidly 3 times, indicating that the learning is successful.
- After successful learning, relearning can be repeated within 3 seconds. After 3 seconds, the last learned IR code will be saved automatically.
Important Note:
- IR code learning is only available when the device indicator light stays solid on.
- If the infrared remote control works in reverse state, press the power button on the remote again within 3 seconds to relearn the code.
- Each on/off channel must separately learn the power-on IR code and power-off IR code from the remote control.
Figure 9: IR Learning Function process.
Figure 10: Compatible and incompatible remote types.
Figure 11: Button Function Setting in Tuya App.
2. App Remote Control
Control your IR devices from anywhere using the Smart Life/Tuya App (for Tuya versions) or your Zigbee2MQTT interface (for Z2M versions). The app allows for multi-device support, managing multiple IR devices in one application.
Figure 12: App remote control interface.
Figure 13: Tuya app interface with AC and TV controls.
Figure 14: Tuya app interface with temperature, humidity, and device controls.
3. Voice Control
For Tuya versions, the device works with Amazon Alexa and Google Assistant, allowing you to turn devices on/off by voice commands. Ensure your smart speaker is properly linked to your Smart Life/Tuya account.
Figure 15: Voice control with Alexa and Google Assistant.
4. Smart Automation & Scheduling
Leverage the smart automation features to create rules based on environmental conditions (if using a T&H sensor version) or schedules. For example, you can set your AC to turn on automatically when the temperature exceeds 28°C.
Figure 16: Smart Environment Awareness and automation triggers.
Figure 17: App interface for history and timing.
Maintenance
1. Battery Replacement
The device is powered by two LR03 (AAA) batteries. When the battery level is low, the app will send a reminder. To replace the batteries:
- Push down to open the battery back cover.
- Remove the old batteries.
- Insert two new LR03 (AAA) batteries, ensuring correct polarity.
- Close the battery back cover.
Figure 18: Low Battery Reminder and battery type.
2. Low Battery Reminder
The app will send timely alerts when the battery is low, ensuring you never miss a moment of smart control. Monitor the battery level within the app settings.
Troubleshooting
FAQ:
- Q: IR code learning succeeded, but control is invalid?
-
- Please retry IR Code learning several times.
- If control still fails after successful retries, the IR remote is incompatible.
- Q: After clicking "Study", the LED flashes right away and the process exits automatically in 3 seconds?
-
There is 940nm infrared signal interference in the environment. Please move to another location to perform the IR learning operation.
- Q: My Zigbee gateway does not support this device and it only shows as a switch or light in the APP, how can I perform learning via the key button?
-
- Press the Reset Key once, the indicator light stays on, and the device enters power-on IR Code learning mode.
- Double-click the Reset Key, the indicator stays steady on, and it enters Power-off IR Code Learning mode.
Specifications
| Feature | Specification |
|---|---|
| Product Name | IR Remote Controller |
| Wireless Type | IR (Infrared), Zigbee 3.0 |
| IR Frequency | 38KHz / 940nm |
| IR Control Distance | ≤12m |
| IR Radiation Angle | 360° |
| Temperature Accuracy (Optional) | ±0.3°C |
| Humidity Accuracy (Optional) | ±5% |
| Battery Type | LR03 (AAA) - Not included |
| Battery Life | >8 Months |
| Operating Voltage | DC3.0V |
| Standby Current | <50uA |
| Operating Temperature | -10~55°C |
| Operating Humidity | max 99%RH |
| Product Size | 70 x 24.5 x 20 mm |
Figure 19: Product dimensions and reset hole.
User Tips
- Zigbee2MQTT Integration: Users report easy pairing with Zigbee2MQTT. The 'study' function in Home Assistant allows for straightforward IR code learning by aiming the remote at the controller.
- Sensor Calibration: If your version includes temperature and humidity sensors, there are options within the app (e.g., Zigbee2MQTT interface) to calibrate these levels for improved accuracy.
- IR Range: Be aware that the effective IR control range can be limited, with some users reporting about 6 feet in plain sight. Ensure the controller has a clear line of sight to the devices it needs to control.
- Button Limitations: The device supports learning up to 6 channels for power on/off functions. Plan your remote control needs accordingly.
Warranty and Support
For warranty information, technical support, or further assistance, please refer to the seller's contact information or the platform's support channels where the product was purchased.