URLIFE E20

Contents

URLIFE E20 Fat Tire Electric Bike User Manual

Model: E20

1. Introduction

Welcome to the URLIFE E20 Fat Tire Electric Bike experience! This manual provides essential information for the safe assembly, operation, maintenance, and troubleshooting of your new e-bike. Please read it thoroughly before your first ride to ensure optimal performance and safety.

Safety Information

Always wear a helmet when riding. Ensure all components are securely fastened before each ride. Be aware of your surroundings and obey all local traffic laws. Avoid riding in adverse weather conditions or on challenging terrain until you are familiar with the bike's handling characteristics.

2. Package Contents

Upon unpacking, please verify that all items listed below are present:

  • URLIFE E20 Electric Bike (90% pre-assembled)
  • 48V 13Ah Removable Battery
  • Battery Charger
  • Safety Tools for Assembly
  • User Manual (this document)
  • Keys for Battery Lock

3. Setup and Assembly

Your URLIFE E20 e-bike comes 90% pre-assembled. Follow these steps to complete the assembly:

  1. Unpack the Bike: Carefully remove the bike and all components from the packaging.
  2. Install Remaining Parts: Use the provided safety tools to install the front wheel, handlebars, pedals, and any other remaining accessories. Refer to the detailed instructions in the PDF manual for specific steps.
  3. Adjust Seat Height: The seat height is adjustable to ensure a comfortable and ergonomic riding position. Loosen the quick-release lever on the seat post, adjust the seat to your desired height, and securely fasten the lever.
  4. Install/Charge Battery: Insert the 48V 13Ah removable battery into its compartment and lock it with the provided key. Before your first ride, fully charge the battery using the included charger.

For a visual guide, please watch the official assembly video:

Video: URLIFE E20 Electric Bike Assembly and Features Overview

Black URLIFE E20 electric bike with front suspension and fat tires

Image: URLIFE E20 Electric Bike in Black

4. Operating Instructions

Powering On/Off

To power on the bike, ensure the battery is installed and locked. Press and hold the power button on the LCD display. To power off, press and hold the same button.

LCD Display

The Smart LCD display provides real-time information about your ride. It is IP54 waterproof.

Color LCD display showing speed, PAS level, battery indicator, and trip mileage

Image: Close-up of the Color LCD Display

  • Speed Mode: Displays current speed.
  • PAS Level: Shows the current Pedal Assist System level (0-5).
  • Battery Indicator: Indicates remaining battery charge.
  • Numerical Display: Shows trip mileage, total mileage, etc.

Riding Modes

The URLIFE E20 offers multiple riding modes:

  • Pedal Assist System (PAS): Provides motor assistance as you pedal. Adjust the PAS level using the controls on the handlebar.
  • Throttle Mode: Engage the throttle for pure electric power without pedaling.
  • Manual Mode: Ride the bike like a traditional bicycle without any motor assistance.

Gears and Braking

The bike features a 7-speed gear system for adapting to various terrains. Shift gears using the shifter on the handlebar. The front and rear disc brakes provide reliable stopping power. Always use both brakes simultaneously for effective and safe braking.

Close-up of the 20x3 inch fat tire, suitable for city roads, soil, sand, and snow

Image: 20"x3" Fat Tire for All-Terrain Riding

Lighting System

The e-bike is equipped with front and rear lights to boost night visibility and ensure safe after-dark riding. Operate them via the controls on the handlebar.

5. Maintenance

Regular maintenance is crucial for the longevity and safe operation of your URLIFE E20 e-bike.

  • Battery Care: Charge the battery regularly, even if not in use, to maintain its health. Store the battery in a cool, dry place. Avoid fully discharging the battery.
  • Tire Pressure: Check tire pressure before each ride. Maintain the recommended PSI for optimal performance and safety.
  • Brakes: Regularly inspect brake pads and discs for wear. Ensure brake levers are responsive and provide adequate stopping power. Adjust or replace as needed.
  • Chain: Keep the chain clean and lubricated to prevent rust and ensure smooth gear changes.
  • Fasteners: Periodically check all bolts, nuts, and quick-release levers to ensure they are tight and secure.
  • Cleaning: Clean your e-bike with a damp cloth. Avoid using high-pressure water jets directly on electrical components. The LCD display is IP54 waterproof, but avoid submerging it.

6. Troubleshooting

Here are some common issues and their potential solutions:

ProblemPossible CauseSolution
Bike does not power onBattery not charged or not properly installed/locked.Ensure battery is fully charged and securely locked in place. Check connections.
Motor not assistingPAS level is 0, throttle not engaged, or motor connection issue.Increase PAS level. Try engaging the throttle. Check motor cable connections.
Brakes feel weakWorn brake pads, loose cables, or disc issues.Inspect brake pads and discs. Adjust brake cable tension. Consult a bike mechanic if unsure.
Unusual noises during rideLoose components, dry chain, or debris.Check all fasteners. Lubricate the chain. Inspect for any foreign objects.

If you encounter issues not listed here or require further assistance, please refer to the comprehensive PDF user manual or contact URLIFE customer support with photos or videos of the problem.

7. Specifications

FeatureSpecification
Motor1000W Peak Motor
Top Speed28 MPH
Battery48V 13Ah Removable Battery
Max Range80 Miles
Charging Time3-5 Hours (Fast Charging)
Tires20" x 3" Fat Tires
Gears7-Speed Gear System
SuspensionFront Fork Suspension
BrakesFront and Rear Disc Brakes
DisplaySmart Color LCD (IP54 Waterproof)
Max Climb Angle30° Steep Hills
Motor Torque80 N.M
Max Rack Load Capacity265 lbs (120 kg)
Frame MaterialSteel
Fork MaterialSteel
Rim MaterialSteel
Applicable PeopleUnisex
CertificationsUL 2849 (Battery)
Diagram of 1000W peak motor with specifications: 28 MPH top speed, 7 speed gears, 30 degree max slope, 80 N.M motor torque

Image: Motor Specifications and Performance

Diagram of 48V 13Ah battery with BMS safety protection, 80 miles travel range, 3-5 hours fast charging, IP54 waterproof, and UL 2849 certification

Image: Battery Specifications and Features

Diagram showing front fork suspension for a stable, shock-absorbing ride

Image: Front Fork Suspension Detail

8. User Tips

  • Pre-Ride Check: Always perform a quick check of tire pressure, brakes, and battery level before heading out.
  • Gear Shifting: For smoother rides and to prolong drivetrain life, ease off the pedals slightly when shifting gears.
  • Battery Range: The 80-mile range is an estimate. Actual range may vary based on terrain, rider weight, PAS level usage, and weather conditions.
  • Secure Cargo: When using the rear rack, ensure any cargo is securely fastened and does not exceed the 265 lbs (120 kg) weight limit.
  • Night Riding: Utilize the front and rear lights for enhanced visibility during low-light conditions. Consider wearing reflective clothing.

9. Warranty and Support

URLIFE is committed to providing a worry-free e-bike experience. If you have any questions or concerns, please contact customer support directly. We guarantee a response within 24 hours and encourage you to provide photos or videos to help us resolve your issues quickly and efficiently.

For the most detailed information, please refer to the full user manual available in PDF format.


Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.