UXCELL Universal Motorcycle Exhaust Heat Shield

Contents

Instruction Manual

UXCELL Universal Motorcycle Exhaust Heat Shield

Product Overview

This universal motorcycle exhaust pipe heat guard is designed to protect riders from high temperatures and prevent contact with the hot exhaust pipe. Constructed from high-quality, durable metal, it is rust-proof, fade-resistant, lightweight, and compact, ensuring long-term use without affecting the motorcycle's appearance.

Motorcycle with UXCELL exhaust heat shield installed, showing the shield and clamps.

Figure 1: UXCELL Universal Motorcycle Exhaust Heat Shield installed on a motorcycle.

Safety Warnings

  • Risk of Scalding: Do not install or disassemble the heat shield when the exhaust pipe is hot. Turn off the engine and allow the exhaust pipe to cool completely first.
  • Do not modify the product.
  • Check mounting screws regularly to ensure they remain tight.
  • Keep children away from the motorcycle and the heat shield.
  • This product is intended for motorcycle exhaust protection only.

Setup and Installation

Installation is easy and requires only one wrench.

  1. Ensure the motorcycle engine is off and the exhaust pipe is completely cool to prevent burns.
  2. Clean the exhaust pipe thoroughly to remove any oil, dust, or debris from the area where the heat guard will be mounted.
  3. Align the heat guard with the exhaust pipe and adjust its position as desired.
  4. Secure the heat guard by tightening the provided clamps/screws firmly.
  5. After installation, check the stability of the heat guard before riding to ensure it is securely fixed.
Close-up of the exhaust heat shield being installed on a motorcycle exhaust pipe.

Figure 2: Installation process of the exhaust heat shield.

Operating Instructions

Once properly installed, the exhaust heat shield operates passively to provide protection:

  • Heat Isolation: It isolates the exhaust pipe's high temperature, protecting the rider's feet and legs from scalding.
  • Object Protection: It prevents external objects from accidentally touching the hot exhaust pipe, reducing potential safety hazards.
  • Improved Comfort: By mitigating heat exposure, it contributes to improved riding comfort.

Maintenance

  • Regular Inspection: Periodically check all mounting screws and clamps to ensure they are tight and the heat shield is securely fastened. Vibrations from riding can loosen fasteners over time.
  • Cleaning: Clean the heat shield with a soft cloth and mild detergent as needed to maintain its appearance. Avoid abrasive cleaners that could scratch the surface.
  • Damage Check: Inspect the heat shield for any signs of damage, such as dents or cracks. If damaged, consider replacement to ensure continued protection.

Troubleshooting

Most issues related to the exhaust heat shield can be resolved by ensuring proper installation.

  • Shield is Loose: Re-tighten all mounting clamps/screws. If the clamps are damaged or stripped, replace them.
  • Shield is Rattling: Ensure the shield is not making contact with other parts of the motorcycle or the exhaust pipe itself in a way that causes vibration. Adjust its position slightly and re-tighten.
  • Inadequate Heat Protection: Verify the shield is correctly positioned to cover the primary hot areas of the exhaust pipe that are exposed to the rider's legs.

Specifications

FeatureDetail
BrandUXCELL
MaterialStainless Steel, Iron
ColorSilver Tone
OriginMainland China
FitmentUniversal fit for most motorcycles and scooters with standard-sized exhaust pipes.
Applicable StandardsDirective 2006/42/EC (machinery safety) and EN ISO 12100:2010

Dimensions (Optional Sizes)

ModelLength (L)Width (W)Clamp Diameter
Model A226mm / 8.90"60mm / 2.36"8-10cm / 3.15"-3.94"
Model B225mm / 8.86"60mm / 2.36"2-7cm / 0.79"-2.76"
Model C265mm / 10.43"55mm / 2.17"2-7cm / 0.79"-2.76"
Diagram showing dimensions of 226mm length, 60mm width heat shield with 8-10cm clamp diameter.

Figure 3: Dimensions for 226x60mm heat shield.

Diagram showing dimensions of 225mm length, 60mm width heat shield with 2-7cm clamp diameter.

Figure 4: Dimensions for 225x60mm heat shield.

Diagram showing dimensions of 265mm length, 55mm width heat shield with 2-7cm clamp diameter.

Figure 5: Dimensions for 265x55mm heat shield.

Underside view of the exhaust heat shield showing mounting brackets.

Figure 6: Underside view of the heat shield showing internal details.

User Tips

  • For optimal protection, ensure the heat shield is positioned to cover the most exposed and hottest parts of your exhaust pipe relative to your riding posture.
  • Consider the clamp diameter carefully when selecting your heat shield model to ensure a secure fit on your specific exhaust pipe.

Warranty and Support

Specific warranty details for this product are not provided in the available documentation. For any warranty claims, technical support, or product inquiries, please contact the seller directly through your purchase platform.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.