Hongwin 11127555212

Contents

PCV Valve Cover Repair Kit User Manual

Model: 11127555212

1. Safety Information

WARNING:

  • To avoid danger of suffocation, keep this plastic bag away from babies and children.
  • Do not use this bag in cribs, beds, carriages, or playpens.
  • This bag is not a toy.
  • Always wear appropriate personal protective equipment (PPE) such as gloves and eye protection when handling automotive parts and chemicals.
  • Ensure the engine is cool before beginning any installation or repair work.
  • Consult a professional mechanic if you are unsure about any installation steps.

2. Product Overview

This PCV (Positive Crankcase Ventilation) Valve Cover Repair Kit is designed to replace the valve cap and membrane in compatible BMW engines. It is a direct fit replacement manufactured to original factory specifications, ensuring good performance and durability.

Top view of the PCV valve cover membrane with orange seal

Figure 2.1: Top view of the PCV valve cover membrane with orange seal.

PCV valve cover membrane with seal and two small springs

Figure 2.2: PCV valve cover membrane with seal and two small springs.

Bottom view of the PCV valve cover membrane

Figure 2.3: Bottom view of the PCV valve cover membrane.

3. Specifications

Feature Detail
Brand Hongwin
Model Number / OEM NO. 11127555212
Material Sliicon Material PA66+GF30 (Metal + Plastic)
Color Black
Placement on Vehicle Front
Origin Mainland China
Product Dimensions (Approx.) 50mm (Diameter) x 16mm (Height)
Package Dimensions 15cm (Length) x 10cm (Width) x 6cm (Height)
Package Weight 0.06 kg
Diagram showing dimensions (50mm diameter, 16mm height) of the PCV valve cover membrane

Figure 3.1: Product dimensions diagram.

3.1. Compatible Vehicle Models (For Reference)

This PCV Valve Cover Repair Kit is compatible with various BMW models. Please verify the OEM part number (11127555212) and dimensions against your vehicle's existing part before installation.

  • For BMW 1 Series:
    • 1 (E81) 118 i (1995cc, 105/100 HP) 2006-2012
    • 1 (E81) 120 i (1995cc, 125/115/120 HP) 2006-2012
    • 1 (E87) 118 i (1995cc, 95/105 HP) 2004-2012
    • 1 (E87) 120 i (1995cc, 110/115/120/125 HP) 2003-2012
    • 1 Convertible (E88) 118 i (1995cc, 100 HP) 2008-
    • 1 Convertible (E88) 120 i (1995cc, 115 HP) 2008-
    • 1 Coupe (E82) 120 i (1995cc, 125/115 HP) 2007-
  • For BMW 3 Series:
    • 3 (E90) 318 i (1995cc, 95 HP) 2005-2007
    • 3 (E90) 320 i (1995cc, 110/115 HP) 2005-2011
    • 3 Convertible (E93) 320 i (1995cc, 110/115 HP) 2007-
    • 3 Coupe (E92) 320 i (1995cc, 110/115 HP) 2006-
    • 3 Touring (E91) 318 i (1995cc, 100/95 HP) 2006-2012
    • 3 Touring (E91) 320 i (1995cc, 110 HP) 2005-2012
  • For BMW 5 Series:
    • 5 (E60) 520 i (1995cc, 115 HP) 2006-2009
  • For BMW X1 Series:
    • X1 Estate (E84) sDrive 18 i (1995cc, 100/110 HP) 2009-
  • For BMW X3 Series:
    • X3 (E83) 2.0 i (1995cc, 110 HP) 2005-
    • X3 (E83) xDrive 20 i (1995cc, 110 HP) 2008-
  • For BMW Z4 Series:
    • Z4 (E85) 2.0 i (1995cc, 110 HP) 2005-
Image showing the product and a list of compatible BMW models

Figure 3.2: Visual representation of compatible BMW models.

4. Installation Instructions

This repair kit is intended for replacement of the PCV valve cover membrane. Professional installation is recommended. If performing the installation yourself, proceed with caution and ensure you have the necessary tools and automotive knowledge.

4.1. Preparation

  1. Ensure the engine is completely cool before starting work.
  2. Gather all necessary tools (e.g., screwdrivers, wrenches, cleaning supplies, AB glue).
  3. Locate the PCV valve cover on your engine. Refer to your vehicle's specific service manual for exact location and removal procedures.

4.2. Removal of Old Part

  1. Carefully remove any engine covers or components obstructing access to the PCV valve cover.
  2. Disconnect any hoses or electrical connectors attached to the valve cover.
  3. Unfasten the retaining clips or screws holding the old PCV valve cover membrane in place.
  4. Gently remove the old membrane and gasket.

4.3. Cleaning and Surface Preparation

  1. Thoroughly clean the mating surface on the valve cover where the new membrane will be installed.
  2. First remove any oil stains from the surface to ensure proper adhesion. Use an appropriate automotive degreaser.
  3. Ensure the surface is dry and free of debris.

4.4. Installation of New Part

  1. Carefully place the new PCV valve cover membrane into position, ensuring it seats correctly.
  2. Use AB glue as specified by your vehicle's repair guidelines or if recommended for sealing. Apply a thin, even layer if required.
  3. Re-fasten the retaining clips or screws, tightening them to the manufacturer's recommended torque specifications (refer to your vehicle's service manual).
  4. Reconnect any hoses or electrical connectors that were removed.
  5. Reinstall any engine covers or components.

4.5. Post-Installation Check

  1. Double-check all connections and fasteners to ensure they are secure.
  2. Start the engine and inspect for any leaks or unusual noises.
  3. Allow the engine to reach operating temperature and re-check for leaks.

5. Operation

The PCV Valve Cover Repair Kit is an internal engine component that functions automatically as part of the engine's crankcase ventilation system. No direct user operation is required after proper installation. Its purpose is to regulate crankcase pressure and prevent oil leaks, contributing to efficient engine operation.

6. Maintenance

The PCV valve cover membrane itself does not require routine maintenance. However, it is recommended to:

  • Periodically inspect the valve cover area for any signs of oil leaks or damage during routine engine checks.
  • Ensure all hoses connected to the PCV system are free from cracks or blockages.
  • Follow your vehicle manufacturer's recommended engine maintenance schedule.

7. Troubleshooting

If you experience any issues after installing the PCV Valve Cover Repair Kit, such as continued oil leaks, rough engine idle, or illuminated check engine light, consider the following:

  • Check for proper installation: Ensure all steps in the installation guide were followed correctly, especially regarding surface cleaning and proper sealing.
  • Verify part compatibility: Double-check that the part number and specifications match your vehicle's requirements.
  • Inspect for other issues: Engine problems can have multiple causes. The issue might not be directly related to the PCV valve cover.

For persistent or complex engine issues, it is highly recommended to consult a qualified automotive technician for diagnosis and repair.

8. User Tips

  • Surface Preparation is Key: As instructed, thoroughly removing all oil stains before applying any adhesive (like AB glue) is crucial for a long-lasting seal. A clean, dry surface ensures optimal adhesion and prevents future leaks.
  • Torque Specifications: When re-tightening screws or clips, always refer to your vehicle's specific service manual for the correct torque specifications. Overtightening can damage components, while undertightening can lead to leaks.

9. Warranty and Support

9.1. Product Warranty

This product comes with a ONE YEAR guarantee from the date of purchase.

9.2. Manufacturer Information

  • Brand: Hongwin
  • Manufacturer: Wenzhou Haowei Auto Parts Co., Ltd.
  • Manufacturer Address: Floor 2, Building 8 (West), Hantian Hardware and Electrical City, Tangxia Town, Ruian City, Zhejiang Province, China
  • Country of Origin: Made in China

9.3. Customer Service

  • Email: inf@hwautoparts.com
  • Telephone: 86-18005775583

9.4. Additional Resources

For more detailed item guides and documents, you may refer to the official PDF manual available from the seller. Please note that this link is provided for reference and may require a PDF viewer:

View User Manual (PDF)

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.