1. Introduction
This manual provides detailed information on the application methods, precautions, and other important aspects of the SNDWAY SW-331G Mini Laser Level Meter. Please read this manual thoroughly before using the product to ensure its optimal performance and safe operation.
For a complete guide, you may also refer to the official User Manual (PDF).
2. Safety Information
General Safety Warnings:
- Always read the Safety Instructions and User Manual thoroughly before using this product. All users must fully understand and adhere to these instructions.
- Do not use the instrument in flammable or explosive environments.
- Do not dispose of used batteries with normal household waste. Please handle them according to national or local laws and regulations.
- If you encounter any quality issues or have questions about the instrument's use, please contact your local dealer or the manufacturer for assistance.
Laser Safety Precautions:
CAUTION: LASER RADIATION
- While the product is in operation, be careful not to expose your eyes to the emitting laser beam (red or green laser source). Prolonged exposure to a laser beam may cause eye damage.
- Do not stare directly into the beam, view directly with optical instruments, or set up the laser at eye level.
- Do not disassemble the laser equipment. There are no user-serviceable parts inside.
- Do not modify the laser equipment in any way. Modifying the laser equipment may result in hazardous Laser Radiation Exposure.
- Do not operate the laser equipment around children or allow children to operate the laser equipment. Serious eye injury may result.
- An exposure to the beam of a Class 2 laser is considered safe for a maximum of 2 seconds. Eyelid reflexes will normally provide adequate protection.
- Some product kits may include accessory glasses. These are NOT certified safety glasses and are ONLY used to enhance beam visibility in brighter environments or at greater distances from the laser source.
3. Product Overview
The SNDWAY SW-331G is a compact and durable laser level designed for various leveling and alignment tasks. It features a bright green laser for enhanced visibility.
Product Structure (SW-331G Model)
- Low battery indicator
- Power button
- Power LED indicator
- Laser emission window
- Lock/unlock switch (Pendulum lock)
- Charging port (USB Type-C)
- 1/4 inch switching bolt hole (for tripod mounting)
4. Setup
4.1 Initial Charging
Before first use, ensure the laser level is fully charged. Connect the provided USB Type-C charging cable to the charging port (6) on the device and to a suitable USB power source. The Power LED indicator (3) will flash slowly during charging and switch to a steady state once fully charged.
4.2 Mounting the Device
The SW-331G can be mounted on a tripod or other compatible surfaces using the 1/4 inch switching bolt hole (7) at the bottom of the device. An L-bracket is included for versatile mounting options.
4.3 Accuracy Check
It is recommended to perform an accuracy check before its first use and periodically during operation, especially for tasks requiring high precision.
5. Operating Modes
5.1 Self-Leveling Mode
To enter self-leveling mode, push the lock/unlock switch (5) to the unlocked position (indicated by an unlocked padlock icon). The laser beam will turn on automatically. If the instrument exceeds its leveling range (4°±1°), the laser beam will flash rapidly to indicate it is out of level.
5.2 Manual Mode
To enter manual mode, push the lock/unlock switch (5) to the locked position (indicated by a locked padlock icon). Short press the power button (2) to turn on the laser equipment. In this mode, the laser beam can be set to different angles as needed, and it will blink at a frequency of 5 seconds each time. Note that the laser beam projected in manual mode cannot be used as a horizontal or plumb reference.
5.3 Brightness Adjustment
In either self-leveling or manual mode, short press the power button (2) to cycle through 1/2/3 levels of laser brightness. The default brightness upon power-on is level 3.
5.4 Pulse Mode
Pulse mode is activated by pressing and holding the power button (2) for 2 seconds or more when the laser tool is in the unlocked position. In this mode, the beams will lower their brightness, and a Pulse LED indicator will turn on (if available).
5.5 Power Off
To shut down the device, long press the power button (2) for 1 second.
5.6 Video Demonstration
6. Maintenance and Care
- When not in use, power off the laser equipment and lock the pendulum for protection.
- Do not store the laser equipment in direct sunlight or expose it to high-temperature environments. The housing and some internal parts are made of plastics and may become deformed in high-temperature conditions.
- Exterior plastic parts may be cleaned with a damp cloth. Although these parts are solvent resistant, NEVER use solvents.
- Use a soft, dry cloth to remove moisture from the laser equipment before storage.
- Store the laser equipment in its case when not in use.
- Keep the device with full power if no operations are planned for a long time, and charge it once every half a year to prevent battery damage.
7. Troubleshooting
- Laser beams flashing rapidly: This indicates that the laser level is out of its self-leveling range (4°±1°). Adjust the position of the device until the beams stop flashing and become steady.
- Low battery indication: When the battery is low, the LED low power indicator (1) will constantly glow red, and the device will automatically shut down after full discharge. Recharge the device using the USB Type-C cable.
- Charging status: During charging, the Power LED indicator (3) will flash slowly. Once fully charged, it will switch to a steady light.
- No laser output: Ensure the device is powered on and the pendulum lock is in the correct position for the desired operating mode (unlocked for self-leveling, locked for manual).
- General issues: If you encounter any quality issues or have doubts about the usage, please contact your local dealer or the manufacturer for assistance.
8. Specifications
| Item | Specification (SW-331G) |
|---|---|
| Product Type | 1V1H/2 Lines |
| Laser Type | LD Green Laser 520nm |
| Laser Class | Class II |
| Laser Power | 15mW×1 |
| Accuracy | ±3mm/10m |
| Leveling Range | 4°±1° |
| Leveling Time | ≤3s |
| Extension Angle | H&V: 110° |
| Ingress Protection | IP54 |
| Charge Mode | USB-C Charging Socket |
| Power Source | Built-in 3.7V 1400mAh Lithium Battery |
| Operation Temperature | -10°C~50°C |
| Storage Temperature | -20°C~60°C |
| Dimension | 65.1x77.5x78.7mm |
9. User Tips
- For best visibility, especially outdoors or in bright conditions, ensure the green laser is set to its highest brightness setting.
- When working on sloped surfaces where self-leveling is not desired, remember to engage the manual mode by locking the pendulum.
- Always keep the laser level clean, especially the laser emission windows, to ensure clear and accurate lines.
10. Warranty and Support
SNDWAY Technology (Guangdong) Co., LTD. ensures the quality of its products. If you encounter any quality issues or have questions regarding the use of your SW-331G Mini Laser Level Meter, please contact your local dealer or the manufacturer directly for prompt assistance.
Manufacturer Contact Information:
- Company: Sndway Technology (Guangdong) Co., LTD.
- Address: Sndway Science & Technology Industrial Park, 58 Tuanjie Road, Humen 523930, Dongguan, China
- Email: market@sndway.com
- Service Hotline: 400-125-6969
- Website: www.sndway.com
- Tel: 0769-85265688
Please retain your purchase receipt for warranty purposes.