JIANKEXING JK-X1-02

Contents

JIANKEXING JK-X1-02 Wabi Sabi Pendant Light

User Instruction Manual

1. Introduction

Thank you for purchasing the JIANKEXING JK-X1-02 Wabi Sabi Pendant Light. This manual provides essential information for the safe installation, operation, and maintenance of your new lighting fixture. Please read it thoroughly before installation and keep it for future reference.

Wabi Sabi Pendant Light installed in a bedroom, showcasing its minimalist design.

Wabi Sabi Pendant Light installed in a bedroom, showcasing its minimalist design.

2. Safety Information & Precautions

WARNING: To avoid electric shock, always turn off the main power supply at the circuit breaker before installation or servicing.

  • Qualified Electrician: Installation should be performed by a qualified electrician or a competent person.
  • Avoid Overload: Do not exceed the maximum power indicated on the lighting fixture.
  • Safety Distance: Keep away from children during installation and operation to avoid accidental touch.
  • No Disassembly: Do not disassemble or modify the lighting fixture yourself. Unauthorized modifications may lead to hazards and void the warranty.
  • No Frequent Switching: Avoid frequent switching within a short period, as it may affect the lifespan of the light source and fixture.
  • Damage: If the lighting fixture is damaged, immediately stop using it and contact customer service.
  • Operating Environment: This fixture is designed for indoor use only in a dry environment. Do not use it in damp conditions (e.g., bathrooms without proper ventilation) or outdoors.

3. Product Specifications

Model NumberJK-X1-02
Brand NameJIANKEXING
Item TypePendant Light
StyleContemporary
MaterialResin (High density polystyrene)
Lampshade ColorWhite
Installation TypeCord Pendant (Self-contained)
Base TypeE27
Light SourceLED bulbs (Bulb not included)
Number of Light Sources1
Voltage90 - 260 V (AC)
Is DimmableNo
Lighting Area1-3 square meters
Luminous Flux<60 lumens
Dimensions (Approx.)Width: 30cm, Cable Length: 150cm (adjustable)
Net Weight (Approx.)2.1 kg
Warranty2 years
Diagram showing the pendant light dimensions: 30cm width and 150cm adjustable cable length.

Diagram showing the pendant light dimensions: 30cm width and 150cm adjustable cable length.

Detail of the pendant light's lampshade texture, labeled 'High density polystyrene'.

Detail of the pendant light's lampshade texture, labeled 'High density polystyrene'.

4. Installation Guide

Before starting, ensure you have the necessary tools (screwdriver, wire strippers, etc.) and that the power is OFF at the circuit breaker.

  1. Power Disconnection: Locate the circuit breaker controlling the light fixture's power supply and turn it OFF. Verify that the power is off using a voltage tester.
  2. Wire Connection: Connect the fixture's wires to your household wiring according to local electrical standards. Typically, this involves connecting the live wire, neutral wire, and grounding wire. Ensure all connections are secure.
  3. Fixture Mounting: Ensure the installation location (ceiling) can safely bear the weight of the luminaire. Secure the fixture's mounting bracket to the ceiling using the accompanying screws. Ensure all components are securely fastened and not loose.
  4. Bulb Installation: Install an appropriate E27 base light bulb. Refer to the fixture's label for the maximum wattage allowed. (Note: Bulb is not included).
  5. Final Assembly: Carefully attach the pendant light body to the mounting bracket, ensuring it is stable and secure.
  6. Power-On Test: Restore power supply at the circuit breaker. Turn on the light switch to check for normal operation.

Video demonstration of the Wabi Sabi Pendant Light, showing its appearance and illumination.

5. Operation

Once installed and powered, operate the pendant light using your standard wall switch. This fixture is not dimmable.

  • Operating Environment: Use only indoors in a dry environment. Avoid damp or outdoor conditions.

6. Care and Maintenance

  • Cleaning: To clean the fixture, ensure the power is off. Simply wipe with a dry or slightly damp, soft cloth. Do not use abrasive cleaners, solvents, or polishes as they may damage the finish.
  • Bulb Replacement: Always turn off the power before replacing the bulb. Allow the bulb to cool down before handling. Use only E27 base bulbs within the specified wattage range.

7. Troubleshooting

ProblemPossible CauseSolution
No light Power not connected; Bulb damaged or poorly connected. Check power supply and wall switch; Inspect bulb for damage and ensure it's screwed in properly. Replace bulb if necessary.
Flickering Unstable voltage; Wiring issues. Ensure stable power supply. Check wiring connections (power off first). If problem persists, consult an electrician.
Dim lighting Bulb aging; Insufficient voltage. Replace the bulb. Check household voltage.
Severe heating High power bulb; Poor heat dissipation. Ensure the bulb wattage does not exceed the fixture's maximum rating. Ensure adequate ventilation around the fixture.

If you encounter issues not listed here or if solutions do not resolve the problem, please contact customer support.

8. Warranty and Support

  • Warranty Period: This product comes with a 2-year warranty from the date of purchase. The specific duration is subject to the product label.
  • Fault Repair Request: For warranty claims or repair requests, please contact customer service. You will need to provide proof of purchase and a detailed description of the issue.
  • Service Replacement: Eligible applicants may apply for product replacement under warranty terms.
  • Consultation Channel: For any questions or support, please contact customer service online.

For additional information and diagrams, you may refer to the official user manual PDF: View User Manual (PDF)

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.