1. Introduction
Thank you for purchasing our 10.1-inch aluminium field monitor. Please read this manual carefully before using the unit. Have a great experience!
2. Safety Information
Please observe the following safety precautions to prevent damage to the product or injury to yourself:
- Avoid heavy impact and dropping the product.
- The screen is made of glass. Do not drop the screen towards the ground. Keep away from injury if the screen is broken.
- Keep the product away from heat sources and avoid prolonged exposure to direct sunlight, as this can damage the LCD screen.
- To prevent damage, do not attempt to disassemble or repair the unit yourself if it does not contain user-adjustable components.
- To maintain the LCD screen and protect the cover, follow these guidelines:
- Refrain from using hard objects to hit the screen.
- Do not force to wipe the screen.
- Do not use chemical solutions to clean the screen.
- Do not spray any detergent directly on the screen.
- Do not write on the screen directly.
- Do not stick anything on the screen.
- Simply wipe with a clean, soft cloth and ensure no water is left on the screen.
3. Key Features
- 10.1-inch full HD IPS screen for confident viewing of details.
- Solid and durable aluminium housing.
- Touch screen and intuitive button operation to meet different needs.
- Sony F970 external install and power kit design for installing and powering external equipment, simplifying your photography setup.
- Supports 3D LUT Log to REC.709 and user 3D LUT upload (up to 32).
- 4-group user switching for quick access to pre-set menus.
- Waveform, Vector, Histogram, and audio meter displays can be moved horizontally and vertically.
- HDR monitoring for accurate visual representation.
- Stereo Earphone output.
4. Product Overview and Setup
4.1. Monitor Layout
4.2. Rear Panel Instruction
- NP-F Battery Slot: Applicable for installing NP-F series batteries.
- Battery Lock: Locks the battery after installation. Press the lock button before removing the battery.
- VESA Mount Position: 75x75mm.
- F970 External Kit: For installing external equipment like wireless transmitters, LED lights, video converters, etc., which can be powered by a Sony F970 battery.
4.3. Top Button Instruction
| Button | Function when OSD is not displayed | Function when OSD is displayed |
|---|---|---|
| F1/Λ | Custom function button F1 | Select previous menu item; Increase or adjust value of selected parameter |
| F2/V | Custom function button F2 | Select next menu item; Decrease or adjust value of selected parameter |
| F3|EXIT | Custom function button F3 | Return/Exit Menu |
| MENU | Display OSD Main menu | Confirm button |
| Power/Touch | Long Press: Power On/Off; Short Press: Turn ON/Off touch function | Long Press: Power On/Off; Short Press: Turn ON/Off touch function |
4.4. Bottom Ports Instruction
- DC IN 12V: DC power input, polarity as indicated (+ center).
- Earphone Jack: 3.5mm earphone port output.
- USB: For firmware updates and LUT file import.
- 1/4 Screw Thread: Can be easily connected to a hot shoe mount or tripod for fixed installation.
- HDMI IN: V2.0, HDMI signal input, up to 4K@60Hz.
- HDMI OUT: V2.0, HDMI signal output, up to 4K@60Hz.
4.5. Mounting Options
- 1/4-20 Screw Thread Points: There are four 1/4-20 thread points (top, bottom, right side & back center) for easy connection to hot shoe mounts or tripods.
- U-shape Bracket: The monitor can be mounted using the included U-shape bracket for tabletop or stand use.
- VESA Bracket Mount Point: The rear of the monitor features 75x75mm VESA mount points, enabling rack mounting or wall hanging.
4.6. Power Supply Options
- The rear cover of the monitor is equipped with an F970 battery plate, compatible with F970 series batteries. A V-mount battery plate is optional.
- Sony F970 battery plate for Sony DV batteries: Supports Sony F970, F960, F950, F930, F770, F750, F730, F570, F550, F530 series.
- DC 12V Input: The left side of the monitor has a DC 12V input power port (5.5mm outer, 2.1mm inner) supporting 7 ~ 24V wide voltage. A DC power adapter needs to be purchased separately.
- Remark: Please remove the battery from the monitor if it will not be used for a long time.
4.7. Sony F970 External Install and Power Kit
A Sony F970 external install and power kit design is integrated into the back of the monitor. This kit allows for the installation and powering of external equipment, such as wireless transmitters, LED lights, and video converters, using a Sony F970 battery. This design helps to save space and reduce the overall weight of your filming equipment.
Kit Installation/Removal:
Note: Before disassembling the kit, ensure the monitor is turned off and remove the battery or power adapter.
- To move the kit: Loosen 2 screws, then adjust the kit up/down/left/right.
- To remove the kit:
- Loosen the 2 screws.
- Use both hands to move the kit up.
- Move the round holes to the corresponding 2 screws.
- Gently lift the kit upwards and carefully disassemble the 2P power cord.
- Remove the 2 screws.
5. Operating Instructions
5.1. Menu Operation Overview
After connecting the monitor to power, the indicator light will be red. Once the monitor turns on, it will turn yellow. When an HDMI signal is input, it turns green. To shut down the monitor while power is still connected, press the power button. To turn on the monitor manually, press the power button. After startup, a short press of the power button toggles the touch function on or off.
5.2. Touch Screen Menu Operation
- Main Menu Access: Double-click on the screen to open the main menu (displayed on the left side). Click on a menu item to display its secondary menu. You can directly select or set function options. Click the touch screen to exit the menu.
- Shortcut Menu: When the main menu is not displayed, swipe up from the bottom of the screen to open the shortcut menu. Swipe left or right to select a function and click the corresponding menu box to turn it on or off. (Note: The shortcut menu does not allow detailed function or parameter settings; these must be done in the main menu).
- Quick Adjustments: When the menu is not displayed, on the left half of the screen, you can directly adjust the backlight brightness. On the right half of the screen, you can directly adjust the volume.
5.3. Button Menu Operation
- Press the "MENU" button to enter the OSD main menu. Use "F1/Λ" or "F2/V" to select first-level items, then press "MENU" to confirm and enter the secondary menu. Use "F1/Λ" or "F2/V" to select items.
- After selecting, press the "MENU" button to confirm and enter the function menu. Use "F1/Λ" or "F2/V" to select the corresponding function or adjust parameters.
- Press the "F3|EXIT" button to return or exit the menu.
5.4. Menu Function Instruction
| Function | Setting/Description |
|---|---|
| Assist | On, Off |
| All Waves | After turning on, waveform, vector, histogram and embedded audio will be shown. |
| Waveform | On, Off Mode: RGB, YUV, Y Waves Trans.: Off, 25%, 50%, 75% Position X: 0~100 (moving horizontally) Position Y: 0~100 (moving vertically) Assists with exposure correction and checks lighting evenness. |
| Vector | On, Off Position X: 0~100 (moving horizontally) Position Y: 0~100 (moving vertically) Shows image saturation and pixel distribution on the color spectrum. |
| Histogram | On, Off Mode: RGB1, RGB2, Y Position X: 0~100 (moving horizontally) Position Y: 0~100 (moving vertically) RGB Histogram: Displays color tone distribution and exposure status. Y Histogram: Checks picture brightness and different color brightness. |
| Focus Assist | On, Off Color: (Red, Green, Blue) Peaking Level: 1~10 Highlights in-focus areas for quick and accurate focusing. |
| Embedded Audio | On, Off Position X: 0~100 (moving horizontally) Position Y: 0~100 (moving vertically) Provides numerical indicators for audio levels and headroom. |
| Over Exposure | Turning on (10~100) Highlights areas with excessive light falling on the image sensor with a striped pattern. |
| Check Field | On, Off Mode: Red, Green, Blue, Mono Adjusts hue and saturation quickly and accurately. |
| False Colors | On, Off Mode: Normal, ARRI Depicts objects in colors different from a true color photograph. |
| Marker | |
| Grid | On, Off Mode: 2x2, 3x3, 4x4, 5x5, 6x6, 7x7, 8x8, 9x9, Custom Rows: 2~9, Columns: 2~9 Color: Red, Green, Blue, Black, White, Gray Divides the picture area into equal grids. |
| Safe Frames | On, Off Mode: 80%, 85%, 90%, 93%, 96%, 2.35:1 Color: Red, Green, Blue, Black, White, Gray |
| Center Marker | On, Off Color: Red, Green, Blue, Black, White, Gray |
| Ratio Marker | On, Off Mode: 4:3, 13:9, 14:9, 15:9, 16:9, 1.85:1, 2.35:1 Color: Red, Green, Blue, Black, White, Gray Modified Mark: 0~5 |
| Image | |
| Scan Mode | Under Scan, Over Scan |
| Aspect Ratio | Auto, 16:9, 16:10, 4:3, 5:4, 1.85:1, 2.35:1, Full Screen Provides various aspect ratios to match different camera anamorphic lenses. |
| Anamorphic | On, Off Mode: 1.33X, 1.6X, 2.0X, 2.0X MAG, User (1.20X~2.00X) Allows viewing of unsqueezed images from anamorphic lenses. |
| Image Flip | On, Off Mode: H Flip, V Flip, H_V Flip |
| Zoom Mode | On, Off Mode: 2X, 4X, 9X, 16X, User (100%~200%) Amplifies HD signal for high-quality close-ups. |
| P2P (Pixel-to-Pixel) | On, Off Enables checking the image from the 1:1 signal source without scaling, essential for capturing optimum detail. |
| User Option | |
| LUT | On, Off When LUT Switch is on, use Lut (SLOG2, SLOG3, LOGC, VLOG). LUT is a table for quickly looking up and output specific color data. Supports loading up to 32 custom LUTs via USB. Lut Import: Confirm Lut Table: Shows 4 built-in LUTs and custom loaded LUTs. |
| HDR Monitoring | On, Off Mode: HLG1, HLG2, HLG3 Reproduces greater dynamic range of luminosity, showing lighter and darker details more clearly. |
| Display Adjustment | Backlight: 0~100 (Adjust screen brightness) Brightness: 0~100 (Adjust image brightness) Contrast: 0~100 (Adjust ratio between brightest and darkest parts) Saturation: 0~100 (Adjust color concentration) Tint: 0~100 |
| Color Adjustment | Color Temp.: 5600K, 6500K, 9300K, User Under User, Red, Green, Blue (0~255) can be adjusted to achieve desired colors. |
| Shortcut Key | Assign F1~F3 custom buttons to functions like All Waves, Waveform, Vector, Histogram, Embedded Audio, Center Marker, Safe Frames, Grid, Focus Assist, False Colors, Over Exposure, Anamorphic, Image Freeze, Check Field, Zoom Mode, Image Flip, Aspect Ratio. |
| System | |
| User Switch | 1~4 Save and recall up to 4 groups of menu settings. |
| Language | English, Simplified Chinese, Spanish, Portuguese, French, Dutch, German, Japanese, Traditional Chinese, Korean, Russian. |
| OSD Option | OSD Time: Off, 15Sec, 30Sec, 45Sec (Select display time of menu) OSD Trans: Off, 25%, 50%, 75% (Adjust transparency of menu background) No Signal: Red, Green, Blue, Black, White, Gray (Change background color when no signal) |
| Volume | On, Off; 0~100 (Adjust speaker volume) |
| Reset | Confirm to restore system to original settings. |
| Firmware Update | Firmware Version (display version number) Confirm to update firmware. |
5.5. How to Load LUT
- USB flash drive format: FAT32.
- Max Files Limit: Maximum 32 LUT files.
- File requirements:
- The LUT file format suffix should be .cube.
- Single file not to exceed 7.9Mb.
- Supports LUT-3D-Size 16, 17, 32, 33, 64, 65.
- Remark: LUT file names must be in English or Arabic numerals.
- Steps for loading:
- Ensure the USB flash drive is inserted into the monitor's USB interface.
- Enter the main menu > LUT > Lut Import > Confirm. The monitor will automatically detect the USB flash drive.
- If a valid LUT file is found, the monitor will load the LUT files and display "[n] name" (where [n] is the quantity number and "name" is from the LUT file's name). If loading is successful, the screen will show "complete[n]". The quantity number for LUT files should be under 32.
- How to clear imported LUTs: Insert an empty USB flash drive into the monitor, enter the main menu > LUT > Lut Import > Confirm. The imported LUTs will be cleared.
6. Maintenance
Proper maintenance ensures the longevity and optimal performance of your FEELWORLD T10 monitor. Please follow these guidelines:
- Cleaning the Screen: Use a clean, soft cloth to gently wipe the screen. Do not use chemical solutions, spray detergents directly, or apply excessive force. Ensure no water is left on the screen.
- General Cleaning: Keep the monitor free from dust and debris. Use a soft, dry cloth for cleaning the housing.
- Storage: When not in use for extended periods, remove the battery and store the monitor in a cool, dry place away from direct sunlight and heat sources.
- Handling: Avoid heavy impacts or dropping the monitor. The protective rubber corners offer some shock absorption, but extreme force can still cause damage.
7. Troubleshooting
7.1. Only black and white or monochrome picture:
- Please check saturation, brightness & contrast adjustments.
- Please check if "Check Field" is set to black, white, monochrome image, or other conditions.
7.2. No Image after powering on:
- Check if the signal cable connection is in good condition.
- Check the signal cable connection again, and ensure you are using the standard adapter to connect the monitor.
- If powered by battery, please check if the battery is fully charged.
7.3. Earphone No sound:
- Check if the Volume control is open. Press the volume button and try to increase the volume.
If there are still other problems, please contact our related technologists for assistance.
Note: Product features and performance are subject to improvement, and specifications may change without prior notice.
8. Specifications
| Parameter | Value |
|---|---|
| Panel Size | 10.1-inch (touch) |
| Resolution | 1920x1200 pixels |
| Dot Pitch | 0.1128 (H) x 0.1128 (W) mm |
| Aspect Ratio | 16:10 |
| Brightness | 500cd/m² |
| Contrast | 1500:1 |
| Viewing Angle | 80°/80°(L/R) 80°/80°(U/D) |
| Backlight | LED |
| Adjustable Backlight | Yes |
| Input | HDMI 2.0 |
| Output | HDMI 2.0 |
| Audio | 3.5mm stereo headphone jack |
| Power In | DC IN 12V |
| HDMI Input/Output Support Format |
480i/576i/480p/576p 720p (60/59.94/50/30/29.97/25/24/23.98) 1080i (60/59.94/50) 1080p (60/59.94/50/30/29.97/25/24/23.98) 3840x2160p (60/50/30/29.97/25/24/23.98) 4096x2160p (60/50/30/29.97/25/24/23.98) |
| Power Input Voltage | 7~24V |
| Power Consumption | ≤10W |
| Unit Size (mm) | 251.91*161.91*23.91 (mm) |
| Unit Weight | 639g |
| Mount Points | 1/4-20 thread points (left, right, top, bottom) |
| Working Temperature | -10°C ~ 60°C |
| Storage Temperature | -30°C ~ 70°C |
9. Warranty and Support
- The warranty period for our products is ONE year. If there is any defect with your product, please contact us in time for resolution.
- We do not accept returned goods unless there is a product quality problem.
- If you insist on returning goods, please contact us in advance. Returns without prior notification will not be accepted.
- Please keep the entire package in its original condition if you decide to return the goods. Provide the tracking number after sending it out.
- Upon receiving your returned goods, we will evaluate them. If the quality problem is indeed our responsibility, a full refund will be issued. If there is no quality problem or the issue is not our responsibility, we reserve the right to reject any refund.
- For further support or to report an item, please refer to the seller's contact information or the platform's reporting tools.
10. User Tips
No specific user tips are available at this time. Please refer to the manual for detailed instructions.