1. Introduction
This manual provides essential information for the safe and effective use of MURATA button cell batteries. These batteries are designed for a wide range of small electronic devices, offering reliable power in a compact form factor. Please read this manual thoroughly before use and retain it for future reference.
2. Safety Information
⚠ DANGER: KEEP OUT OF REACH OF CHILDREN
Button cell batteries, especially lithium types, can cause severe or fatal injuries within 2 hours if swallowed. Swallowing can lead to chemical burns, perforation of soft tissue, and death. Seek medical attention immediately if ingestion is suspected or if a battery is placed inside any part of the body.
⚠ WARNING
- Do not recharge, disassemble, heat, or dispose of in fire.
- Do not short-circuit the battery.
- Do not mix old and new batteries, or different types of batteries.
- Ensure correct polarity (+/-) when installing.
- Store batteries in their original packaging until ready for use.
- If battery fluid leaks and comes into contact with skin or eyes, rinse immediately with plenty of water and seek medical advice.
3. Product Overview and Specifications
MURATA offers a range of high-quality button cell batteries suitable for various applications. The primary models covered in this manual include:
- Lithium Coin Cells (CR series): CR1616, CR1220, CR2032, CR2016, CR2025. These typically provide 3 Volts.
- Alkaline Button Cells (LR series): LR1130, LR41. These typically provide 1.5 Volts.
Other compatible models may include CR2450, CR2430, CR1632, CR1620, CR2354, BR3032, CR2412, CR2050B, CR2330, CR1225, BR2450A, ML1220, CR2477, VL2020, VL2330.
Typical Specifications:
| Model | Chemistry | Nominal Voltage | Typical Diameter | Typical Thickness |
|---|---|---|---|---|
| CR1616 | Lithium | 3V | 16mm | 1.6mm |
| CR1220 | Lithium | 3V | 12mm | 2.0mm |
| CR2032 | Lithium | 3V | 20mm | 3.2mm |
| CR2016 | Lithium | 3V | 20mm | 1.6mm |
| CR2025 | Lithium | 3V | 20mm | 2.5mm |
| LR1130 | Alkaline | 1.5V | 11.6mm | 3.05mm |
| LR41 | Alkaline | 1.5V | 7.9mm | 3.6mm |
Note: Dimensions are approximate and may vary slightly.
4. Setup and Installation
Button cell batteries are typically used in small electronic devices such as watches, calculators, remote controls, medical devices, and toys. The installation process is generally similar across devices:
- Identify Battery Type: Check your device's manual or the existing battery to determine the correct battery model (e.g., CR2032, LR41) and voltage.
- Open Battery Compartment: Locate the battery compartment on your device. This may require a small screwdriver or a coin to open.
- Remove Old Battery (if applicable): Carefully remove the old battery, noting its orientation (which side is positive and which is negative).
- Insert New Battery: Insert the new MURATA button cell battery, ensuring the positive (+) side faces the correct direction as indicated by the device's markings. Avoid touching the flat surfaces of the battery with bare fingers to prevent transferring oils that could affect conductivity.
- Close Compartment: Securely close the battery compartment.
- Test Device: Turn on your device to confirm proper installation and functionality.
5. Operating Instructions
Once installed, MURATA button cell batteries operate automatically, providing power to your device. No specific user operation is required for the battery itself. The battery life will depend on the device's power consumption and usage patterns.
6. Maintenance
- Storage: Store unused batteries in a cool, dry place, away from direct sunlight and extreme temperatures. Keep them in their original packaging to prevent short-circuiting.
- Cleaning: If battery terminals or contacts in the device appear dirty, gently clean them with a dry cloth or cotton swab before installation to ensure good electrical contact.
- Disposal: Dispose of used batteries according to local regulations. Do not throw them in household waste.
7. Troubleshooting
- Device Not Working After Battery Replacement:
- Check if the battery is inserted with the correct polarity (+/-).
- Ensure the battery compartment is securely closed.
- Verify that you are using the correct battery model and voltage for your device.
- Check for any corrosion or debris on the battery contacts in the device and clean if necessary.
- Try a new battery to rule out a faulty battery.
- Short Battery Life:
- Ensure the device is not left on or in a high-power consumption mode unnecessarily.
- The battery may be nearing the end of its lifespan.
- Extreme temperatures can affect battery performance and lifespan.
8. User Tips
- Always have spare batteries on hand for critical devices.
- When replacing multiple batteries in a device, replace all of them at the same time with new batteries of the same type and brand.
- For devices used infrequently, consider removing batteries during long periods of storage to prevent potential leakage.
9. Warranty and Support
For warranty information or technical support, please refer to the seller's policies or contact the point of purchase. Keep your purchase receipt as proof of purchase.
A detailed test report for various button cell models, including safety compliance, is available. This document, titled "Test Report" (Report No.: TST25133800397SR), can be referenced for technical compliance details.