1. Introduction
This manual provides comprehensive instructions for the installation, operation, and maintenance of your new LED Rear Bumper Reflector Lights. Designed for specific Toyota Camry models, these lights enhance vehicle visibility and safety with multi-functional lighting capabilities.
2. Safety & Warnings
Important Safety Information: Read all instructions before use. Failure to follow these instructions may result in damage to the product or personal injury.
- Keep the device and its cord out of reach of children under 3 years old.
- Keep away from children unless supervised by an adult.
- Do not use this product for purposes other than its intended use.
- Inspect the product before each use; do not use if damaged.
- Follow installation and operation guidelines to avoid injury.
- Do not expose to water or moisture.
3. Product Features
- Perfect Fit: Direct replacement for original rear bumper reflectors on Toyota 8th Camry SE / XSE / TRD 2018-2024 models.
- Multi-functionality: Integrates Rear Running Light, Brake Light, and Dynamic Turn Signal Light into one unit.
- Enhanced Visibility: High-brightness LED chips with dynamic flowing turn signal design improve rear recognition and driving safety in various conditions (night, rain, fog).
- Durable Construction: Made from premium ABS housing and high-transparent PC lens, ensuring IP67 waterproof, dustproof, fade-resistant, and anti-aging properties for a long service life.
- Easy Installation: Precise original car radian, plug and play design, requiring no cutting or extra wiring.
- Aesthetic Upgrade: Transforms ordinary factory reflectors into a full LED style, enhancing the vehicle's rear visual effect and personalized appearance.

Image: Detailed view of the product components, highlighting the PC Lens, Bright Light LEDs, and ABS Housing.
4. Model Compatibility
These LED Rear Bumper Reflector Lights are specifically designed for:
- Toyota 8th Camry SE model (2018-2024)
- Toyota 8th Camry XSE model (2018-2024)
- Toyota 8th Camry TRD model (2018-2024)
Note: These lights are NOT compatible with LE or XLE models.

Image: Visual guide for model compatibility, distinguishing between compatible SE/XSE/TRD models and incompatible LE/XLE models.
5. Specifications
| Attribute | Value |
|---|---|
| Light Source | High Power LED |
| Voltage | 12V DC |
| Material | ABS Shell + PC Lens |
| Waterproof Grade | IP67 |
| Installation | Direct Plug & Play |
| Color | Red |
| Item Type | Brake Lights Assembly |
| Length | 24.4 cm (9.61 inches) |
| Width | 3.3 cm (1.3 inches) |

Image: Diagram illustrating the dimensions of the LED Rear Bumper Reflector Light.
6. Installation Instructions
Step 1: Preparation Work (Safety First)
- Park the car steadily and engage the handbrake.
- Crucially, disconnect the negative cable of the battery before proceeding to prevent electrical hazards.
Step 2: Remove the Old Light
- Open the tailgate.
- Locate and remove the tail light repair cover from the inside of the vehicle.
- Disconnect the existing electrical plug.
- Unscrew any fixing nuts.
- Carefully pull out the old lamp from the outside to the inside.
Step 3: Install the New Light (Test First, Then Fix)
- Pre-testing: Connect the new light's plug to the original car harness. Reconnect the battery temporarily and turn on the power. Test whether the brake lights, turn signals, reverse lights, and running lights illuminate normally.
- Formal Installation: After confirming normal function, disconnect the battery again.
- Align the new light with its designated position and install it.
- Tighten all fixing nuts from the inside.
- Finally, tighten the electrical plug and replace the maintenance cover.

Image: Wiring diagram for installation. Connect white wire to Running Light, black wire to Negative, red wire to Brake Light, and yellow wire to Turn Signal.
7. Operating Instructions
Final Inspection
- Function Review: Reconnect the battery and perform a final check of all lighting functions (running light, brake light, dynamic turn signal).
- Sealing Inspection: After washing the car or pouring water over the installed lights, check for any severe water ingress or fogging inside the lamp. Slight fogging is normal and should clear up and dry out with use.
Video: Demonstration of the LED Rear Bumper Reflector Lights' start-up animation, daytime running light, brake light, and dynamic turn signal functions.

Image: Visual representation of the different lighting effects: running light, brake light, and dynamic flowing turn signal.
8. Maintenance
To ensure the longevity and optimal performance of your LED Rear Bumper Reflector Lights, follow these maintenance guidelines:
- Regularly clean the light surfaces with a soft cloth and mild automotive cleaner to remove dirt and grime. Avoid abrasive materials that could scratch the PC lens.
- Periodically check the wiring connections to ensure they remain secure and free from corrosion.
- Inspect the lights for any physical damage or cracks, especially after severe weather conditions or minor impacts.
- While the lights are IP67 waterproof, avoid directing high-pressure water jets directly at the seals during car washes.
9. Troubleshooting
If you encounter any issues with your LED Rear Bumper Reflector Lights, consider the following troubleshooting steps:
- Lights Not Illuminating: Check all wiring connections to ensure they are properly seated and connected according to the wiring diagram. Verify that the vehicle's battery is fully charged and connected.
- Intermittent Function: Loose connections are a common cause. Re-check all wiring. Ensure no wires are pinched or damaged.
- Water Inside the Lens: While designed to be waterproof (IP67), extreme conditions or improper installation can lead to moisture. If severe water ingress occurs, re-check the installation and seals. Minor fogging should dissipate naturally.
- Incorrect Light Pattern: Double-check the wiring against the provided diagram to ensure each wire (running, brake, turn signal) is connected to the correct vehicle circuit.
If problems persist after attempting these steps, please contact customer support for further assistance.
10. User Tips
- Always perform the pre-testing step before fully securing the lights to ensure all functions work correctly. This saves time and effort.
- When disconnecting the battery, ensure you know your car's radio code or any other settings that might be affected.
- Take your time during installation. Rushing can lead to improper connections or damage.
- The dynamic turn signal feature is a great safety enhancement; ensure it's wired correctly to maximize its benefit.
- Consider applying a thin bead of automotive-grade silicone sealant around the edges of the light housing after installation for an extra layer of moisture protection, especially if you live in a very wet climate.
11. Warranty & Support
For any product-related inquiries, technical support, or warranty claims, please contact the manufacturer or their authorized representative:
Manufacturer Information:
- Company: Guangzhou Camel Technology Co. Ltd.
- Address: No.4 West Fangxin Road, Fangcun Avenue, Liwan District, Guangzhou City, Guangdong Province
- Email: 1620477595@qq.com
EU Authorized Representative:
- Company: MJCM SAR
- Address: 78 Avenue des Champs Elysees Office 326, Paris, France
- Email: mjcm190928@gmail.com
- Contact Number: 0033 752907452
Importer Information:
- Company: Guangzhou Camel Technology Co. Ltd.
- Address: No.4 West Fangxin Road, Fangcun Avenue, Liwan District, Guangzhou City, Guangdong Province
- Email: 1620477595@qq.com
12. Compliance Information
This product complies with relevant European Union directives.
Attestation of Compliance:
- Certificate No: HUT20028631-28
- Applicant: Foshan Hulyou Lighting Co., Ltd
- Product: LED Strip Lighting
- Model No: N002
- Trademark: N/A
- CE Authorized Signer: IrefHUT
- Date: April 08, 2021