MOES NA503B

Contents

MOES 5in1 Smart Air Quality Sensor User Manual

Model: NA503B

1. Introduction

Thank you for choosing the MOES 5in1 Smart Air Quality Sensor. This device is designed to provide comprehensive monitoring of your indoor air quality, detecting Carbon Monoxide (CO), combustible gases, smoke, temperature, and humidity. It features a clear LCD display and audible/visual alarms to ensure your safety and comfort. Please read this manual thoroughly before installation and use to ensure proper operation and to prevent any potential hazards.

MOES 5in1 Multi-Gas & Smoke Detector with 1000mAh battery backup

MOES 5in1 Multi-Gas & Smoke Detector with 1000mAh battery backup.

2. Important Safety Information

WARNING!

  • Improper installation or use may cause electric shock, fire, explosion, or other hazards.
  • This device is for residential use only.
  • Do not paint the device, as this may block the sensor openings and interfere with its operation.
  • Do not block the alarm openings or cover the device, as this will reduce its effectiveness.
  • Do not use in areas with excessively high humidity or dust, as this can lead to false alarms or damage.
  • Do not use near open flames or in areas with high concentrations of steam or smoke, which could trigger false alarms.
  • Regularly test the device as instructed in this manual to ensure it is functioning correctly.
  • The alerts cannot be muted permanently.

3. Product Overview

The MOES 5in1 Smart Air Quality Sensor is available in different models, each designed to detect specific combinations of gases and smoke, in addition to temperature and humidity. Please verify your model before use.

Four different models of the MOES 5in1 Smart Air Quality Sensor, each detecting different gases.

Four different models of the MOES 5in1 Smart Air Quality Sensor, each detecting different gases.

3.1 Available Models:

  • CO Detector
  • CO & Combustible Gas Detector
  • CO & Smoke Detector
  • CO & Combustible Gas & Smoke Detector

The device features a built-in premium CO sensor for enduring accuracy and a detachable plug for portability.

Close-up view of the MOES 5in1 Smart Air Quality Sensor highlighting the built-in CO sensor.

Close-up view of the MOES 5in1 Smart Air Quality Sensor highlighting the built-in CO sensor.

Image showing the MOES 5in1 Smart Air Quality Sensor with its detachable plug removed.

The plug can be removed from the detector, allowing for temporary relocation.

4. Setup and Installation

4.1 Initial Setup

  1. Unpack the device and ensure all components listed in the packing list are present.
  2. Plug the device into a standard 100-240V 50/60Hz electrical outlet.
  3. The device will undergo a brief preheating period (a few seconds) before starting normal operation.

Video demonstrating the initial plug-in and display activation of the MOES 5in1 Smart Air Quality Sensor.

4.2 Placement

The MOES 5in1 Smart Air Quality Sensor is ideal for various residential environments where CO, gas, or smoke may accumulate. Consider placing the device in:

  • Kitchens (near stovetops, but not directly above them)
  • Bedrooms
  • Basements
  • Garages (away from direct vehicle exhaust, but in the general area)
  • Near gas water heaters or fireplaces
Image showing various applicable scenes for the MOES 5in1 Smart Air Quality Sensor, including kitchen, bedroom, garage, and basement.

Applicable scenes for the MOES 5in1 Smart Air Quality Sensor.

Image illustrating various environments where the MOES 5in1 Smart Air Quality Sensor can be used, such as near gas stoves, vehicle exhausts, water heaters, and fireplaces.

Applicable environments for the MOES 5in1 Smart Air Quality Sensor.

5. Operation

5.1 Device Screen and Button Features

The device's LCD screen displays real-time readings for CO, combustible gas (if applicable), smoke (if applicable), temperature, and humidity. The central button allows for various adjustments and self-tests.

Diagram of the MOES 5in1 Smart Air Quality Sensor's screen and buttons, detailing CO Value, Smoke sign, Temp Value, Hum Value, CO Indicator Light, Mute ON/OFF Button, CO Unit: PPM, CO: Level 1-3, GAS Sensitivity, Brightness/GAS Sensitivity Adjustment Button, Power/Self-Test Button.

Detailed view of the device screen and button features.

5.2 Brightness Adjustment

You can manually adjust the screen brightness to one of three levels (0%, 50%, 100%) for comfortable viewing in different lighting conditions.

Image showing three different brightness levels (0%, 50%, 100%) of the MOES 5in1 Smart Air Quality Sensor's display.

Adjustable brightness levels for the display.

5.3 Battery Backup

The device includes a built-in 1000mAh Lithium-ion battery, providing temporary power supply during unexpected power outages. This ensures continuous monitoring even when the main power is interrupted.

Image showing the MOES 5in1 Smart Air Quality Sensor plugged into an outlet and then operating on battery backup during a power cut.

The device operates on battery backup during power cuts.

6. Alerts and Indicators

The device provides visual and audible alerts based on detected levels of CO, combustible gas, and smoke.

6.1 Three-Level Indicator Light Guide

The indicator light on the device changes color to visually communicate the current air quality status:

  • Green: Safe Level - Indicates normal and safe conditions.
  • Yellow: Warning Level - Indicates elevated levels requiring attention.
  • Red: Alarm Level - Indicates dangerous levels requiring immediate action.
Diagram showing the three-level indicator light guide: Green for Safe Level, Yellow for Danger Level, and Red for Alarm Level.

Visual guide for the three-level indicator light.

6.2 Alarm Thresholds

  • CO Alarm Threshold: 49 ppm (Initial Default)
  • Combustible Gas Alarm Threshold: GAS Lv2 (≥5% LEL)
  • Smoke Alarm Threshold: ≥ 0.15 dB/m

When an alarm sounds, immediately ventilate the area and evacuate if necessary. Do not attempt to silence the alarm without addressing the source of the hazard.

7. Specifications

Feature Specification
Model Number NA503B
Brand Name MOES
Carbon Monoxide (CO) Measurement Range 0~999 ppm (±10%)
CO Alarm Threshold 49 ppm (Initial Default)
Humidity Measurement Range 0%–95% RH (±5%), non-condensing
Combustible Gas Level GAS Lv1-3 (Lv3: ≥15% LEL)
Gas Alarm Threshold GAS Lv2 (≥5% LEL)
Smoke Alarm Threshold ≥ 0.15 dB/m
Input Power 100-240V 50/60Hz
Shell Material Flame Retardant ABS Plastic
Operating Temperature -10°C~50°C / 14°F~122°F
Alarm Yes
Dimensions (L x W x D) 125.5mm x 60.5mm x 36.3mm
Origin Mainland China
Certification CE
Diagram showing the dimensions of the MOES 5in1 Smart Air Quality Sensor: 60.5mm width, 125.5mm height, and 36.3mm depth.

Dimensions of the device.

7.1 Packing List

  • NA503B Device x1
  • User Manual x1
  • Plug x1 (US or EU, depending on model)
  • Packaging Lining x1

8. Maintenance

  • Regular Cleaning: Gently wipe the device with a soft, dry cloth to remove dust. Do not use harsh chemicals or abrasive cleaners.
  • Avoid Obstructions: Ensure that the sensor openings and alarm vents are not blocked by paint, dust, or other objects.
  • Self-Test: Perform a self-test regularly (e.g., monthly) by pressing the Power/Self-Test button to ensure the alarm and sensors are functioning correctly.
  • Battery Check: The device has a built-in battery backup. Ensure it is regularly plugged into a power source to keep the internal battery charged.

9. Troubleshooting

  • False Alarms: If the alarm sounds without an apparent hazard, check for sources of steam, strong odors, or high humidity. Relocate the device if false alarms persist.
  • No Display/Power: Ensure the device is properly plugged into a working electrical outlet. If using battery backup, ensure the battery is charged.
  • Device Not Responding: Unplug the device, wait a few minutes, and plug it back in. If the issue persists, contact customer support.
  • Alarm Continues After Hazard Cleared: Ensure the area is thoroughly ventilated. The alarm should cease once the detected levels return to safe thresholds.

10. User Tips

No specific user tips are available from the provided data.

11. Frequently Asked Questions (FAQ)

No specific FAQs are available from the provided data.

12. Warranty and Support

12.1 Warranty Instructions

Products are covered by a 24-month warranty from the date of receipt. To claim warranty service, please present your warranty card or proof of purchase (e.g., sales invoice with product date). If product quality problems occur within 10 days from the date of receipt, please contact the store where you purchased it to apply for after-sales service. If the product is damaged due to personal reasons or improper use/maintenance, repair costs will be charged.

When returning goods for warranty service, it is recommended to carefully package the product with padding to prevent damage during shipping. The warranty does not cover parts and consumables that wear out naturally during use, nor does it cover product defects or damage caused by improper use or unauthorized repairs.

12.2 FCC Compliance Statement

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment.

12.3 Recycling Information

All products marked with the symbol for separate collection of waste electrical and electronic equipment (WEEE Directive 2012/19/EU) must be disposed of separately from municipal waste. To protect your health and the environment, this equipment must be disposed of at designated collection points for electrical and electronic equipment. For more information on where and how these collection points work, please contact your local authority or the retailer where you purchased the product.

12.4 Manufacturer Information

Manufacturer: WENZHOU NOVA NEW ENERGY CO., LTD

Address: Power Science & Technology Innovation Center, NO. 23 Wulian Road, Yongzhong Street, Longwan District, Wenzhou, Zhejiang, China

Telephone: +86-577-5716

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.