GELID GP-Ultimate

Contents

GELID GP-Ultimate Thermal Pad User Manual

Model: GP-Ultimate

Introduction

The GELID GP-Ultimate Thermal Pad is a cutting-edge solution designed for optimal heat dissipation in electronic components such as CPUs, GPUs, motherboards, and other high-temperature SMD components. It provides superior thermal contact to heatsinks, especially on PCBs with height differences and uneven surfaces.

Key features include:

  • Ultimate 15 W/mK Heat Conductivity
  • Non-Electrical Conductive
  • Non-Corrosive, Non-Curing & Non-Toxic
  • Easy Application
GELID GP-Extreme thermal pads in packaging, showing 1.0mm thickness.
GELID GP-Extreme thermal pads in packaging, showing 1.0mm thickness.
Image showing the old and new packaging versions for GP-Ultimate thermal pads.
Description of switching between new and old packaging versions. The product performance remains unchanged.

Specifications

Attribute Value
Type Thermal Pad
Model Number GELID GP-Ultimate
Material Silicone
Thermal Conductivity 15 W/mK
Electrical Conductivity Non-Electrical Conductive
Corrosive Properties Non-Corrosive
Curing Properties Non-Curing
Toxicity Non-Toxic
Operating Temperature Range -60°C to 220°C
Dimensions 80 x 40 mm (Pad Size)
Package Dimensions 128mm (L) x 65mm (W) (Packaging)
Package Weight 0.034 kg

Thickness Variants:

  • Single Pack (1pc included): 0.5 mm (TP-GP04-A), 1.0mm (TP-GP04-B), 1.5mm (TP-GP04-C), 2mm (TP-GP04-D), 3mm (TP-GP04-E)
  • Value Pack (2pcs included): 0.5 mm (TP-VP04-A), 1.0mm (TP-VP04-B), 1.5mm (TP-VP04-C), 2mm (TP-VP04-D), 3mm (TP-VP04-E)
GELID GP-Extreme thermal pads in packaging, showing 1.0mm, 1.5mm, and 2.0mm thicknesses.
Available thickness variants of GELID GP-Extreme thermal pads.
GELID GP-Extreme thermal pad packaging with dimensions (128mm/5.04in length, 65mm/2.56in width).
Packaging dimensions for GELID GP-Extreme thermal pads.
Diagram highlighting key features of the GP-Extreme thermal pad: Thermal Insulation, Soft and Shockproof, Self-Adhesive, Widely Applicable, Easy to Operate, Good Plasticity.
Key features of the GP-Extreme thermal pad.

Setup Instructions

Follow these steps for proper application of the thermal pad:

  1. Clean the Surface: First, clean up the surface of the sticky or back-attached object to remove dust and oil stains, etc.
  2. Prepare the Pad: Tear off the protective film on one side first (do not tear off the protective film on both sides at the same time) to reduce the number and area of direct contact to avoid damage to the product's viscosity and thermal conductivity.
  3. Apply the Pad: Stick the side with the protective film removed to the top of the radiator. After installation, apply a certain pressure to the radiator to ensure that the thermal conductive sheet is fixed, and then tear off the other side of the protective film.
Diagram illustrating the three steps for using the thermal pad: cleaning the surface, peeling one protective film, and applying to the component.
Visual guide for thermal pad application.

Operating Instructions

The thermal pad is designed for continuous operation once correctly installed. Ensure proper contact for optimal performance. No further operational steps are required after successful installation.

Maintenance

  • Storage: Keep dry and store in a cool, dry place when not in use.
  • Cleaning: If necessary, gently wipe the surface of the thermal pad with a damp cloth to clean. Avoid harsh chemicals.

Troubleshooting

Common Issues:

  • Overheating: If overheating occurs after installation, verify that the thermal pad is applied correctly and has full contact with both the component and the heatsink. Improper application can lead to reduced thermal transfer efficiency.
  • Damage during Handling: The thermal pad is fragile. Handle with care to avoid tearing or damaging the pad during installation.

User Tips

  • Surface Preparation: Always ensure the component and heatsink surfaces are completely free of dust, old thermal paste residue, and oil before applying the new thermal pad for the best adhesion and thermal transfer.
  • Thickness Selection: When choosing a thermal pad, carefully consider the gap between the component and the heatsink. Select a thickness that allows for optimal compression without applying excessive pressure, which could damage components.
  • Cutting to Size: If the thermal pad needs to be cut, use a sharp, clean blade to ensure precise cuts and minimize material waste.

Warranty & Support

For any product-related issues, technical support, or warranty inquiries, please contact our store support directly. A detailed user manual in PDF format is also available for download; please refer to the product page or contact support for the direct link.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.