Mercedes-Benz W203, R171, R199, W209, W240

Contents

Mercedes-Benz Car Door Welcome Light Projector Instruction Manual

HD LED Car Door Welcome Light Projector for Mercedes-Benz Vehicles

Product Overview

This manual provides comprehensive instructions for the installation, operation, and maintenance of your new HD LED Car Door Welcome Light Projector. Designed to enhance your vehicle's aesthetics and functionality, these lights project a clear logo onto the ground when the car door is opened, offering both style and illumination.

The product features high-brightness, energy-saving LEDs and is certified with RDW E4-Standard-Authentifizierung, ensuring quality and safety.

Specifications

FeatureDetail
Item TypeWelcome Light / Car Light
Voltage12 V
Power Consumption7 W
MaterialABS + Aluminum Alloy
Service LifeMore than 80,000 hours
Light SourceHigh brightness, energy-saving LED
CertificationRDW E4-Standard-Authentifizierung
Package DimensionsLength: 11 cm, Width: 4 cm, Height: 4 cm
Package Weight0.05 kg
Product dimensions showing 65mm length, 26mm height, and 22mm width.
Figure 1: Product dimensions. The light measures 65mm in length, 26mm in height, and 22mm in width.
Diagram of HD Projection lens components.
Figure 2: HD Projection lens diagram, illustrating the internal optical components for clear image projection.

Compatible Vehicle Models

This welcome light projector is compatible with the following Mercedes-Benz models:

  • C-Class W203 Sedan (2001-2007)
  • SLK-Class R171 Coupé (2006 onwards)
  • SLR-Class R199 Coupé (2003-2009)
  • Coupé of Associazione Class W209 (2003-2008)
  • Maybach W240 Sedan (2002 onwards)

Installation Guide

Follow these steps carefully to install your new car door welcome lights. No drilling or wiring modifications are required for most installations.

  1. Prepare the Vehicle: Turn off the vehicle's power supply to prevent any electrical issues during installation.
  2. Locate and Remove Old Light: Identify the installation position at the inner bottom of the car door. Use a prying tool (if necessary) to carefully remove the existing door light component. Disconnect the wiring harness from the old light.
  3. Connect New Light: Align the new welcome light projector with the installation position. Connect the positive and negative poles of the welcome light to the corresponding poles of the door light's power cord. Ensure a secure connection.
  4. Secure New Light: Gently push the new welcome light into the installation slot until it clicks into place. Ensure it is firmly seated and flush with the door panel.
  5. Test Functionality: Open the car door to check if the light turns on normally. Verify that the projected pattern is clear and that the installation position is appropriate.
  6. Troubleshoot (if needed): If any abnormalities occur, such as the light not turning on, a dim pattern, or an improper fit, promptly troubleshoot issues with the circuit or installation position.
Four-panel image showing the installation steps: prying out the old light, disconnecting wires, connecting new light, and snapping it into place.
Figure 3: Visual guide for the installation process. This image demonstrates how to remove the old light, disconnect the wiring, connect the new projector, and secure it in the door panel.

Installation Video Guide

For a visual walkthrough of the installation process, please refer to the official video below:

Video 1: Step-by-step installation guide for the car door welcome light projector.

Operating Instructions

The HD LED Car Door Welcome Light Projector operates automatically. Once correctly installed, the light will illuminate and project the chosen logo onto the ground whenever the corresponding car door is opened. The light will turn off automatically when the door is closed.

Maintenance

  • Cleaning: To maintain optimal projection clarity, periodically wipe the lens and the light's exterior with a soft, dry cloth. Avoid using abrasive cleaners or solvents that could damage the surface or lens.
  • Connection Check: If the light's performance degrades, check the electrical connections to ensure they are still secure and free from corrosion.
  • Avoid Water Exposure: While designed for automotive use, avoid direct high-pressure water spray on the light during car washes to prevent potential water ingress.

Troubleshooting

If you encounter any issues with your welcome light projector, refer to the following common problems and solutions:

  • Light Does Not Turn On:
    • Ensure the vehicle's power supply is on.
    • Check the electrical connections for proper polarity (positive to positive, negative to negative) and secure contact.
    • Verify that the light is correctly seated in its installation position.
    • Inspect the vehicle's door light circuit for any blown fuses or wiring damage.
  • Dim or Unclear Projection:
    • Clean the projector lens with a soft, lint-free cloth. Dust or debris on the lens can obscure the image.
    • Ensure the light is fully inserted and aligned correctly in the door panel.
    • Check for any obstructions between the light and the ground.
  • Light Flickers or Turns Off Intermittently:
    • Re-check all electrical connections for looseness or corrosion.
    • Ensure the light is receiving a stable 12V power supply.
    • If the issue persists, the unit may be faulty and require replacement.

If problems persist after attempting these troubleshooting steps, consult a professional automotive technician.

User Tips

  • Always ensure the car door is fully open when checking the projection to get the best view of the logo.
  • For optimal visibility, install the lights in a clean and dry environment.
  • Consider testing the lights before fully snapping them into place to confirm correct wiring and projection.

Additional Resources and Support

For further detailed information, including diagrams and multi-language instructions, you may refer to the comprehensive user manual available in PDF format. This document can be accessed via the following link:

View User Manual (PDF)

If you require further assistance or have questions not covered in this manual, please contact the seller or a qualified service professional.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.