1. Introduction
Thank you for choosing the KEVANLY Motorcycle LED Mirror Light. This product is designed to enhance visibility and provide warning signals for various vehicles, including motorcycles, UTVs, and ATVs. It features a dual-color LED spotlight with red and blue flashing modes, offering both aesthetic appeal and functional safety. This manual provides essential information for safe installation, operation, and maintenance of your new LED lights.
2. Safety & Warnings
Important Safety Information
Read all instructions before use. Failure to follow these instructions may result in damage to the product or personal injury.
- Keep the device and its cord out of reach of children under 3 years old.
- Keep away from children unless supervised by an adult.
- Do not use this product for purposes other than its intended use.
- Inspect the product before each use; do not use if damaged.
- Follow installation and operation guidelines to avoid injury.
- Do not expose to water or moisture (for electrical products).
- Handle with care to avoid cuts or injuries (for sharp/dangerous items).
Warning: Installation must comply with local motorcycle modification regulations. The mini front light serves only as auxiliary illumination and cannot replace the original headlight. The manufacturer assumes no liability for malfunctions or safety risks resulting from improper installation, incorrect wiring, or unauthorized use.
3. Product Overview
Features
- Dual Color LED: Red and blue flashing modes for warning and visibility.
- High Brightness LED Wick: Increased brightness by 200% for enhanced visibility.
- Strong Spotlight Lens: Provides a wider irradiation range and long-distance lighting.
- Durable Construction: Waterproof, dustproof, shockproof, and temperature-resistant aviation-grade aluminum alloy.
- Low Power Consumption: Energy-saving and environmentally friendly design.
- Versatile Application: Suitable for motorcycles, UTVs, ATVs, cars, SUVs, trucks, and electric vehicles.
- Easy Installation: Designed for simple installation with multiple mounting positions.
Components
The product package includes:
- 2 x LED Mirror Light Units
- Wiring harness (approx. 79 cm / 31.10 inches)
- Mounting accessories (adhesive pads or screws, depending on installation method)
4. Specifications
| Parameter | Value |
|---|---|
| Product Name | Mirror Light |
| Mode | Red Blue Flash |
| Voltage | DC 12V |
| Material | Aviation Grade Aluminum Alloy |
| Applicable Vehicle Model | Universal Type |
| Color | Red Blue |
| Cable Length | 79.00 cm / 31.10 inches |
| Light Unit Dimensions (Height x Depth x Width) | 2.20 cm (0.86 in) x 0.97 cm (0.38 in) x 3.33 cm (1.31 in) |
| Weight (including accessories) | 31 grams |
| Environmental Features | Waterproof, Dustproof, Shockproof, Temperature-resistant |
5. Setup & Installation
Pre-Installation Checklist
- Ensure the motorcycle's main power switch is OFF and the key is removed to prevent short circuits.
- Verify that the installation location complies with local motorcycle modification regulations.
Installation Steps
- Choose Mounting Location:
- Mirror Light: Adhere to the back of the rearview mirror. Secure using the included adhesive pads or screws.
- Eagle Eye Light: Attach to warning positions such as the body bumper or side skirts.
- Mini Headlight: Mount on the front fork bracket, ensuring it aims toward the riding direction.
- Wiring Connection:
- Connect each light's wiring to the motorcycle's 12V power supply interface.
- Ensure correct polarity: The red wire is positive (+), and the black wire is negative (-).
- Wrap all wire joints with electrical tape to prevent water ingress and ensure a secure connection.
- Testing and Adjustment:
- Turn on the motorcycle's power to test the lights.
- Adjust the beam angle to the desired position for optimal visibility.
- Verify that all lights are securely fastened and there are no loose parts.
6. Operation
The KEVANLY LED Mirror Lights operate on a DC12V electrical system. Once properly installed and wired, they will function as auxiliary lights with red and blue flashing modes.
Usage Precautions
- This product is compatible only with DC12V motorcycle electrical systems. Never connect to high-voltage power sources to prevent burning out the lights or damaging vehicle circuits.
- When using mini front lights at night, avoid blinding oncoming vehicles or pedestrians with direct glare.
- Keep Eagle Eye lights illuminated continuously for warning purposes, especially in low visibility conditions.
7. Maintenance
- Cleaning: Inspect light fixtures and wiring connections before riding. Wipe light surfaces and clean water/dust from connectors after rainy conditions or muddy roads.
- Protection: Avoid scratching the lamp surface or touching the LED beads with sharp objects to prevent reduced light transmission or damage to the LED beads.
- Adhesive Models: For models installed with adhesive, replace the adhesive pad if adhesion weakens over time.
- Screw Models: For models installed with screws, periodically tighten screws to prevent loosening due to vibration.
- Troubleshooting: If the lamp malfunctions, first check for good wiring connections.
- Professional Service: Non-professionals should not disassemble the lamp housing. Any repairs or complex maintenance should be performed by qualified personnel.
8. Troubleshooting
- Lights not turning on:
- Check all wiring connections to ensure they are secure and correctly polarized (red to positive, black to negative).
- Verify that the power source (DC12V) is active and providing sufficient voltage.
- Inspect the wires for any cuts, pinches, or damage.
- Ensure the motorcycle's main power switch is on.
- Lights flickering or dim:
- Check for loose wiring connections or corroded terminals.
- Ensure the power supply is stable and not fluctuating.
- Clean the light surface if it's dirty, as this can affect brightness.
- One light not working:
- Check the individual wiring for that specific light unit.
- If wiring is correct, the light unit itself might be faulty and require replacement.
9. User Tips
- For optimal visibility and safety, consider installing these lights in conjunction with your existing vehicle lighting system, not as a sole replacement.
- Regularly check the tightness of mounting screws, especially after riding on rough terrain, to prevent lights from becoming loose due to vibration.
- When cleaning your vehicle, use a soft cloth and mild cleaner on the lights to avoid scratching the lens or damaging the LED chips.
10. Compliance Information
This product complies with the following EU directives and regulations:
- EU RoHS (Restriction of Hazardous Substances)
- REACH (Registration, Evaluation, Authorisation and Restriction of Chemicals) environmental directives
- LVD 2014/35/EU (Low-Voltage Electrical Regulations)
- EMC 2014/30/EU (Electromagnetic Compatibility Regulations)
Its light intensity and warning parameters conform to EU motorcycle riding equipment standards, making it suitable for use in the EU market.
For a detailed user manual, please refer to the official PDF document: User Manual (PDF)
11. Manufacturer & Support
Manufacturer Information
Manufacturer: Guangzhou Kejie Trading Co., Room 302, No. 10, Ou Gang North Street, Ke Mu Long West Road, Tianhe District, Guangzhou City, Guangdong Province, China
EU Authorized Representative: SUCCESS COURIER SL, Calle de RIO TORMES 13A, oficina 1, Fuenlabrada, Madrid, 28947 Spain
Importer: Guangzhou Kejie Trading Co., Room 302, No. 10, Ou Gang North Street, Ke Mu Long West Road, Tianhe District, Guangzhou City, Guangdong Province, China
Customer Support
For any questions, technical assistance, or warranty claims, please contact your retailer or the manufacturer directly using the contact information provided above. Please have your batch/serial number ready when contacting support.