FastDeng 220V COB Led Strip Light with EU/AU Switch Plug

Contents

220V COB LED Strip Light User Manual

Model: 220V COB Led Strip Light with EU/AU Switch Plug

1. Product Overview

This 220V COB LED strip light is designed for high-brightness illumination in various settings. It comes with a power plug (EU or AU, depending on selection) and includes complimentary mounting clips for easy installation. This energy-efficient and durable product is suitable for home, commercial, and decorative lighting applications, offering three distinct light color options: cold white, neutral white, and warm white.

220V COB LED Strip Light with EU/AU plugs and on/off switch in a modern room setting.
Figure 1: 220V COB LED Strip Light with included EU/AU plugs and on/off switch.
Detailed view of the LED strip components including on/off switch, EU/AU plugs, fasten connection, and 288 LEDs per meter.
Figure 2: Product details showing the On/Off switch, EU/AU plugs, fasten connection, and 288 LEDs/m density.

2. Safety Precautions

! Warning: Read carefully before installation and use:

  • Do not expose the light strip's plug to water or damp environments. The plug's power connection is not waterproof.
  • Keep away from children, pets, and flammable items.
  • Do not arbitrarily cut, splice, or modify the wiring or LED components, except at designated cutting marks.
  • Use only the included power plug; do not connect to incompatible power sources.
  • Ensure adequate ventilation during use to prevent overheating.
  • Disconnect power before installation, cleaning, or maintenance.
Safety warning: Do not roll up the LED strip when powered, showing an example of a melted strip due to overheating.
Figure 3: Safety Warning - Always spread out the light strip when powered to prevent overheating and damage.

Important Note:

After you receive the COB light string, you need to quickly expand the light string after connecting to the power supply. Due to the high brightness of the light string, it will heat up normally during operation. Please do not roll it together, causing the light string to overheat and burn.

3. Setup and Installation

Step 1: Unboxing and Inspection

Verify all accessories are included in the package:

  • COB LED light strip
  • 220V power plug (EU or AU type) with On/Off switch
  • Mounting clips (screws included)

Step 2: Connect Power

Plug the EU or AU plug (depending on your region and product variant) into a compatible 220V AC power outlet. The light strip will illuminate by default once connected and the switch is turned on.

Diagram showing how to connect the LED strip to the power plug, emphasizing a secure and easy connection.
Figure 4: High Safety Easy Connection - Ensure the connection is fastened and durable.

Step 3: Install the Strip Light

  1. Ensure the wall or surface where the strip light will be installed is clean and dry before installation.
  2. Secure the strip light using the provided mounting clips. Use screws to fix the clips to the surface.
  3. Avoid excessive bending of the strip light to prevent damage to the internal components.
  4. Prevent sharp objects from pressing against or scratching the LED beads.
Image showing the included holder clips and screws for mounting the LED strip.
Figure 5: Gift-holder clips and screws for securing the LED strip.

4. Operating Instructions

Once the LED strip is securely installed and connected to a 220V AC power outlet, use the integrated On/Off switch on the power cord to control the light. The strip will illuminate when the switch is in the 'On' position.

Images showing the different color temperatures: Cold White, Neutral White, and Warm White.
Figure 6: Available light color temperatures: Cold White, Neutral White, and Warm White.
Image demonstrating the flexibility of the COB LED strip.
Figure 7: The COB LED strip is soft and flexible for versatile installation.

5. Care and Maintenance

  • Gently wipe the light strip with a dry cloth or a slightly damp soft cloth. Do not use chemical cleaners, as they may damage the strip.
  • Store the light strip in a dry place when not in use.
  • Do not forcefully pull or coil the power cord.
  • The strip is cuttable every 50cm at designated marks. Ensure power is disconnected before cutting.
Diagram showing the front and back of the LED strip, indicating cutting marks every 50cm.
Figure 8: The LED strip can be cut every 50cm at the marked points.
Image highlighting the IP65 waterproof rating of the LED strip.
Figure 9: The LED strip is IP65 Waterproof. For outdoor use, ensure the power connector is also waterproofed.

6. Specifications

FeatureSpecification
Product TypeCOB LED Strip Light
Model Number220V COB Led Strip Light with EU/AU Switch Plug
Lamp BeadsCOB (288 LEDs/meter)
Color TemperatureWarm White (3000K), Neutral White (4500K), Cold White (6000K)
Waterproof RateIP65 Waterproof
Working VoltageAC220V
Cuttable IntervalEvery 50cm
Strip Size (W x H)10mm x 4mm
Color Rendering Index (CRI)>= 85RA
Luminous Flux249-2000 (units not specified, typically Lumens)
Average Life (hrs)30,000
Power SourceAC
Power Consumption (W/m)8.64W/m
LED Chip BrandEpistar
CertificationROHS, CE, LVD
OccasionLiving room, Bedroom, hallways, stairs, trails, windows, kitchen, hotels, clubs, shopping malls, garden, building, square, Archway, bridge edge lighting, Security Emergency lighting, DIY ad sign lighting.

7. Troubleshooting

  • Light strip does not turn on: Ensure the power plug is securely connected to a working 220V AC outlet and the On/Off switch is in the 'On' position. Check for any visible damage to the strip or power cord.
  • Partial sections of the strip are not lighting up: This may indicate a damaged section. If the strip has been cut, ensure connections are properly made.
  • Light strip is overheating: Immediately disconnect power. Ensure the strip is fully uncoiled and spread out, allowing for adequate air circulation. Refer to safety precautions.

8. User Tips

  • For optimal light distribution and to prevent overheating, always unroll the entire length of the LED strip before connecting it to power.
  • When planning your installation, measure carefully and utilize the designated cutting marks every 50cm for precise length adjustments. Remember to disconnect power before cutting.
  • Consider the color temperature (Warm White, Neutral White, Cold White) that best suits the ambiance of your intended application area.

9. Warranty and Support

For after-sales service or any product-related inquiries, please contact the official customer support of FD Light and Lighting Store and provide proof of purchase.

Additional item guides and documents, including a PDF user manual, may be available. Please refer to the product page for more details or contact customer support.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.