IRALAN YH4

Contents

IRALAN Modern Smart Ceiling Light

Model: YH4

We serve with care and efficiency. If you have any questions, please do not hesitate to contact us.

1. General Safety Instructions

WARNING:

  • Assemble the light on a hard and level surface to avoid damage.
  • To avoid electric shock, the power must be turned off during the whole assembly or future cleaning.
  • Please assemble this light with at least two people.
  • For a better assembly experience, please read the instructions below, or search "IRALAN Lighting" on YouTube for more installation videos.

2. Package Contents (Accessories)

Please ensure all parts are present before beginning assembly.

Accessories for IRALAN Smart Ceiling Light

Image: Overview of included accessories.

ItemQuantity
Nuts37 pcs
Short Screws4 pcs
Long Screws4 pcs
Washers4 pcs
Long Tubes13 pcs
Short Tubes25 pcs
Cross Bracket1 pc

3. Assembly Instructions

  1. Step 1: Unpack Components
    Open the box and carefully take out all the components.
  2. Step 2: Organize Components
    Place all the components on a clean and flat table for easy access.
    Components laid out on a table

    Image: All light components organized on a table.

  3. Step 3: Attach Short Tubes to Petals
    Assemble the short tubes to 12 petals. The short threaded end of the tubes goes into the petals.
  4. Step 4: Attach Long Tubes to Petals
    Assemble the long tubes to 6 petals. The short threaded end of the tubes goes into the petals.
  5. Step 5: Assemble Petals with Long Tubes to Plate
    Assemble the 6 petals with long tubes to the middle part of the main plate.
  6. Step 6: Secure Petals with Nuts (Long Tubes)
    Set these petals to the plate and secure them with nuts.
  7. Step 7: Assemble Petals with Short Tubes to Plate
    Assemble the 12 petals with short tubes to the marginal part of the main plate.
  8. Step 8: Secure Petals with Nuts (Short Tubes)
    Set these petals to the plate and secure them with nuts.
  9. Step 9: Fasten Petals
    Use the provided wrench to securely fasten all the petals.
  10. Step 10: Connect Wires
    Connect all the wires from the petals to the central collector. Pay close attention to the correct direction for each connection.
  11. Step 11: Prepare Cross Bracket
    Assemble the flat-headed screws to the cross bracket with nuts, but do not fully tighten them yet.
  12. Step 12: Position Cross Bracket
    Place the cross bracket onto the main plate, ensuring all four flat-headed screws go through the corresponding small holes on the plate. Then, remove the cross bracket and fully fasten the nuts onto the screws.
  13. Step 13: Install Cross Bracket to Ceiling
    Install the cross bracket to the ceiling using sharp pointed screws and an electric drill. Ensure the flat-headed screws remain in their position.
  14. Step 14: Mount Light Fixture
    Lift up the assembled light fixture and align it with the cross bracket on the ceiling. The four flat-headed screws should go through the main plate. Fasten the light fixture securely with the remaining nuts.

4. Operating Instructions

4.1 Remote Control Pairing

  1. Step 1: Insert Batteries
    Open the battery compartment of the remote control and insert the required batteries (not included).
  2. Step 2: Pair Remote
    Turn on the light fixture using your wall switch. Immediately after turning it on, press the "ON 1 OFF" button on the remote control. The light will flash three times, indicating successful pairing.
Remote control functions and pairing instructions

Image: Remote control layout showing 100% brightness, full/half function, and night light function buttons.

4.2 APP Pairing

  1. Step 1: Download App
    Scan the QR Code provided in the manual or on the product packaging to download and install the control app on your smartphone.
  2. Step 2: Search and Pair
    Turn on the light fixture using your wall switch. Open the app, search for the light fixture, and initiate the pairing process.
  3. Step 3: Set Scene
    Once paired, you can set a scene for the light (e.g., Living Room, Bedroom). Follow the on-screen prompts in the app to complete the setup.

4.3 Light Functions

  • Brightness Adjustment: Use the remote or app to adjust brightness from 0% to 100%.
  • Color Temperature Adjustment: Adjust color temperature from 3000K (Warm Yellow) to 6500K (Cold White) to suit your mood or activity. Common settings include 3000K (Warm), 4500K (Natural), and 6500K (Cold).
  • Full/Half Function: Quickly switch the brightness of natural light to 50% or 100%.
  • Night Light Function: Quickly switch to natural light and 7% brightness. This weak light is ideal for sleeping.
Adjustable color temperature and brightness

Image: Visual representation of color temperature (3000K to 6500K) and brightness (0% to 100%) adjustments.

5. Maintenance

  • Cleaning: Ensure the power is off before cleaning. Use a soft, dry cloth to wipe the surface of the light fixture. For stubborn marks, a slightly damp cloth can be used, followed by a dry cloth.
  • Avoid Harsh Chemicals: Do not use abrasive cleaners, solvents, or harsh chemicals, as these can damage the finish and acrylic components.
  • Regular Checks: Periodically check that all mounting screws are secure.

6. Troubleshooting

  • Light Not Turning On:
    • Check if the power supply is connected correctly.
    • Ensure the wall switch is in the ON position.
    • Verify that the circuit breaker has not tripped.
    • If using the remote, ensure batteries are fresh and correctly inserted.
  • Remote Control Not Working:
    • Replace batteries in the remote control.
    • Ensure the remote is within range of the light fixture.
    • Re-pair the remote control following the instructions in section 4.1.
  • APP Connection Issues:
    • Ensure your smartphone's Bluetooth (if applicable) is enabled.
    • Restart the light fixture by turning it off and on at the wall switch.
    • Restart the app on your smartphone.
    • Try re-pairing the light with the app following instructions in section 4.2.
  • Light Flickering:
    • Ensure all wire connections are secure.
    • Verify the input voltage is within the specified range (AC 85-260V).

7. Specifications

FeatureDetail
BrandIRALAN
Model NumberYH4
MaterialIronware + Acrylic
Light SourceIntegrated LED bulbs (192 LED chips)
Power40W
Luminous Flux3600LM (Range: 2000-82000)
Color TemperatureInfinite Dimming (3000K Warm to 6500K Cold)
Input VoltageAC 85-260V
Lighting Area5-15 square meters
Dimensions (Diameter x Height)60 cm x 9 cm
Is DimmableYes
Is Smart DeviceYes (APP & Remote Control)
Installation MethodSurface Mounted Assembly
CRI80+ (Ra98 High Color Rendering)
Dimensions and power specifications

Image: Diagram showing product dimensions (D 60CM, H 9CM), power (40W), area (5-15M²), and lumen (3600LM).

8. Warranty and Support

This IRALAN Smart Ceiling Light comes with a 2-year warranty from the date of purchase.

For any warranty claims, technical support, or inquiries, please contact your seller or refer to the official IRALAN support channels.

You can also refer to the full user manual PDF for more detailed information: Download User Manual PDF

9. User Tips

  • Optimal Lighting: Experiment with different color temperatures and brightness levels to find the perfect ambiance for various activities like reading, relaxing, or working.
  • Night Mode: Utilize the dedicated night light function for a soft, non-disruptive glow during the night.
  • App Customization: Explore the app's features to create custom scenes and schedules for your lighting to enhance convenience and energy efficiency.

© 2024 IRALAN. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.