Geely F01R00KA13

Contents

User Manual: Vapor Canister Purge Valve

Model: F01R00KA13

1. Product Information

This manual provides instructions for the F01R00KA13 Vapor Canister Purge Valve, designed for Geely vehicles.

  • Product Name: Vapor Canister Purge Valve
  • Model: F01R00KA13
  • Batch Number: 20260320002
Main product image of the F01R00KA13 Vapor Canister Purge Valve with YE logo

Figure 1: F01R00KA13 Vapor Canister Purge Valve (Main View)

2. Safety & Warnings

Read all instructions carefully before use to ensure safety and prevent damage.

  • Warning: This product involves fuel system components. Installation and maintenance MUST be performed by qualified automotive technicians.
  • Warning: Always disconnect the negative battery cable before any operation to prevent fire caused by electrical short circuits.
  • The use of fuel that does not meet EU environmental standards is prohibited, as it will shorten the service life of the canister and solenoid valve.
  • Warning: Product failure may result in fuel vapor leakage, posing risks of fire or environmental pollution. If a malfunction is detected, stop using the product immediately and arrange for repair.

3. Installation Instructions

3.1. Pre-Installation Preparation

  • Ensure the vehicle is turned off.
  • Disconnect the negative battery cable.
  • Prepare special tools: torque wrench, clip remover, and sealing grease.

3.2. Installation Steps

  1. Remove the Old Solenoid Valve:
    • Mark the positions of all connecting hoses.
    • Use the clip remover to release hose clips.
    • Disconnect the electrical connector of the solenoid valve.
    • Remove the mounting bolts.
    • Carefully take out the old solenoid valve.
  2. Clean the Installation Area:
    • Clean oil stains and impurities from the mounting base and hose connectors.
  3. Install the New Solenoid Valve:
    • Align the new solenoid valve with the mounting base.
    • Tighten the mounting bolts to the specified torque value (refer to vehicle service manual for exact torque).
    • Connect all hoses and secure the clips, ensuring no twisting of hoses.
    • Fully insert the electrical connector and confirm it is locked in place.
  4. Post-Installation Inspection:
    • Reconnect the negative battery cable.
    • Start the vehicle to check for fuel leaks.
    • Read vehicle fault codes to confirm no system abnormalities.

3.3. Installation Precautions

  • Do not pull or bend the electrical wiring harness during installation to avoid damaging internal wires.
  • Hose connections must be secure to prevent fuel vapor leakage and safety hazards.
Side view of the F01R00KA13 vapor canister purge valve

Figure 2: Side view of the valve, showing hose connections

Angled view of the F01R00KA13 vapor canister purge valve, showing electrical connectors

Figure 3: Angled view, highlighting electrical connectors

4. Operating Instructions

The Vapor Canister Purge Valve operates automatically as part of the vehicle's Evaporative Emission Control (EVAP) system. Its function is to control the flow of fuel vapors from the charcoal canister to the engine intake manifold for combustion, preventing their release into the atmosphere.

No direct user operation is required for this component. Proper functioning is indicated by the absence of engine warning lights related to the EVAP system and normal vehicle performance.

5. Maintenance

The F01R00KA13 Vapor Canister Purge Valve is generally a maintenance-free component. However, regular vehicle maintenance checks should include:

  • Visual Inspection: Periodically check the valve and its connecting hoses for any signs of cracks, damage, or loose connections.
  • Leak Detection: Be alert for any unusual fuel odors, which could indicate a fuel vapor leak.
  • Diagnostic Scans: If the Check Engine Light illuminates, a diagnostic scan may reveal fault codes related to the EVAP system or the purge valve.

Any detected issues should be addressed by a qualified automotive technician.

6. Troubleshooting

If you experience issues that you suspect are related to the vapor canister purge valve, consider the following:

  • Check Engine Light: If illuminated, retrieve diagnostic trouble codes (DTCs) using an OBD-II scanner. Common codes related to the purge valve include P0440, P0441, P0442, P0446, P0449, P0455, and P0456.
  • Rough Idling or Stalling: A faulty purge valve can sometimes cause vacuum leaks, leading to rough engine operation.
  • Difficulty Starting After Refueling: This can be a symptom of a purge valve stuck open, allowing fuel vapors to flood the engine.
  • Reduced Fuel Economy: While not always directly noticeable, a malfunctioning EVAP system can impact fuel efficiency.

For any persistent issues, professional diagnosis and repair are recommended.

7. Specifications

Attribute Value
Product Name Vapor Canister Purge Valve Solenoid
OEM NO. F01R00KA13
Manufacturer Part Number F 01R 00K A13
Origin Mainland China
High-concerned chemical None
Package Length 5 cm
Package Width 5 cm
Package Height 9 cm
Package Weight 0.08 kg
Angled view of the F01R00KA13 vapor canister purge valve, showing hose connections and part details

Figure 4: Detailed view of the valve's connections

8. User Tips

  • Always ensure the vehicle's battery is disconnected before attempting any installation or repair involving electrical components.
  • When replacing automotive parts, it is highly recommended to consult your vehicle's specific service manual for exact torque specifications and detailed diagrams.
  • If you are unsure about any step of the installation process, seek assistance from a certified automotive technician.

9. Manufacturer & EU Representative Information

Manufacturer:

Ruian Lizeng Auto Parts Factory
Floor 4, Building 10, No. 88 Fengdu 1st Road,
Xikeyuan Community, Tangxia Town, Wenzhou City,
Ruian City, Zhejiang Province, 330381, Mainland China
Phone: 15658599998
Email: lz@sina.com

EU Authorized Representative:

SUCCESS COURIER SL
CALLE RIO TORMES NUM. 1, PLANTA 1, DERECHA, OFICINA 3,
Fuenlabrada, Madrid, 28947 Spain
Email: successservice2@hotmail.com
Phone: 34-910602659

10. Additional Resources

A detailed user manual in PDF format is available for download. This document contains comprehensive information regarding the product.

You can access the PDF manual here: F01R00KA13 Vapor Canister Purge Valve User Manual (PDF)

© 2024. All rights reserved. This manual is for informational purposes only.

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.