1. Product Overview
This manual provides instructions for the installation, operation, and troubleshooting of your Leeocar Android Touch Screen Car Radio. This multimedia player head unit is designed to fit Ford F150 models from 2009 to 2014, offering features like WiFi, GPS Navigation, Auto Carplay, and Android Auto.
2. Compatibility and Package Contents
2.1. Vehicle Compatibility
This unit is designed for Ford F150 models from 2009 to 2014. Please verify your car's dashboard configuration before installation. The unit is compatible with dashboards similar to 'Model B' as shown in the compatibility guide. It is NOT compatible with original car radios that have an 8-inch screen or automatic A/C controls (Model A).
2.2. What's Included in the Package
Please check the package contents carefully upon receipt. If any accessories are missing, contact customer service.
- Power Cable
- Installation Guide
- Crowbar
- Microphone
- 6-pin USB cable
- 4-pin USB cable
- Reversing Cable
- RCA Cable
- CANBUS Box
- Backup Camera
- GPS Antenna
- Radio Antenna
3. Setup and Installation
Note: Do not connect wiring while power is on. Doing so may result in system errors, fuse damage, or permanent malfunction. Always disconnect the battery before installation.
3.1. Radio Wiring Diagram
Refer to the wiring diagram for proper connections. The CANBUS box is pre-connected to the wiring harness; do not disconnect it as functions may be disabled.
3.2. Radio Rear Panel Pinout Diagram
This diagram illustrates the pinout configuration on the rear panel of the radio. Only connect the labeled plugs on the original car radio. Remaining plugs do not need to be connected.
3.3. Wiring Harness Connection Tutorial
Follow these steps for connecting the wiring harness:
- Connect the main power plug to the radio. If the radio does not power on, try using the alternative power plug (B) instead of (A).
- Connect the RCA cable: Connect the 'VL AUDIO OUT' female connector to the 'AUDIO OUT' female connector on the RCA cable.
- Connect the 'Factory Subwoofer' female connectors to the corresponding connectors on the original vehicle wiring.
If your factory power connector does not include ACC and ILL wires, the unit must receive the power-on signal via CANBUS. In that case, connect the SM2.54mm female connector to the male connector (Power Plug A) from the CANBUS.
3.4. Rear Camera Wiring Tutorial
A night vision waterproof camera is included. It will automatically display the reverse image once the car is in reverse gear.
- Connect the red wire (Wire-D) to the positive terminal of the backup light (12V).
- Connect Wire-A to the corresponding wire.
- To get guide lines, cut off the little circle on the knot of the camera cable.
3.5. Steering Wheel Controls Setup
To set up steering wheel controls, navigate to: Car Settings → Factory (password: 000000) → CarType Setting, and select "Simple-Soft--Ford--F150--2009-2012 F150(F150_XP03)".
4. Operating Instructions
4.1. Basic Features
- HD 9" 2.5D Capacitive Touch Screen: Easy operation with a user-friendly interface.
- Built-in GPS Navigation: Supports offline navigation (purchase from Play Store) and online navigation via Google Maps when connected to WiFi.
- Built-in WIFI: Connect to WiFi for online maps, streaming, and app downloads.
- Hi-Fi Function: Reproduces sound with high fidelity.
- Built-in Bluetooth: Supports A2DP for music streaming, hands-free calls, and automatic phonebook loading.
- Double USB Adapter Input: For connecting USB devices.
- File Manager: Supports downloading, installing, and deleting Android apps.
- Multilanguage Support: Supports up to 40 national languages.
- FM Radio: Enjoy online music by transferring it to the car stereo via FM, with 18 preset stations.
- Time Setting: Automatically set date and time via network or GPS, or adjust manually.
- External Microphone Support: For improved call quality.
4.2. Wireless CarPlay & Android Auto (via Zlink)
The unit supports both wireless and wired CarPlay (for iPhone) and Android Auto (for Android phones).
Connecting Wireless CarPlay / Android Auto:
- Turn on Wi-Fi and Bluetooth on your phone.
- On the radio, open the Bluetooth Phone app and find the corresponding Bluetooth device name. The default PIN code is
0000. - On your phone, go to Bluetooth settings, locate the radio's Bluetooth device name, enter the PIN code
0000, and complete the pairing. - For iPhone: Tap 'Use CarPlay' when prompted, and set the device type as 'Car Stereo'.
- For Android: Ensure Location is turned on and your phone supports wireless Android Auto (Android 11 or above is recommended). Open the ZLINK app on the car radio. CarPlay or Android Auto should launch automatically.
Tips:
- If CarPlay/Android Auto doesn't appear, make sure your phone is not connected to any other wireless or Bluetooth devices.
- Grant all required permissions when prompted on your phone.
4.3. Mirroring Feature (via Zlink)
For iOS (Wireless Mirroring):
- Open the ZLINK app on the car stereo and select "Wireless Mirroring".
- Enable your phone's cellular data and personal hotspot, and allow others to join.
- Connect the car stereo's WiFi to the personal hotspot.
- Swipe down from the top of your phone screen to access the control center, tap "Screen Mirroring", and select "zj-airplay" to pair and complete the wireless mirroring connection.
For iOS (Wired Mirroring):
- Open the "Zlink" app and switch to mirror function.
- Using the included 4-pin/6-pin USB cable, connect the USB cable to your phone to establish a connection.
- Follow the on-screen instructions.
For Android (Wireless Mirroring):
- On your phone, go to Bluetooth settings, locate the radio's Bluetooth device name, enter the PIN code:
0000, and complete the pairing. - Open the ZLINK app on the radio and select "Wireless Mirroring".
- Scan the QR code to download the "zPlus" app.
- Enable your phone's hotspot and connect the radio's WiFi to the phone hotspot.
- Open the "zPlus" app on your phone, select the connection method - Wireless Connection to start mirroring and screen casting.
For Android (Wired Mirroring):
- On your phone, go to Bluetooth settings, locate the radio's Bluetooth device name, enter the PIN code:
0000, and complete the pairing. - Open the ZLINK app on the radio and switch to wired mirroring mode.
- Use the 4Pin/6Pin USB cable provided to connect the USB data cable to your phone.
- Open the "zPlus" app on your phone and select the connection method - USB Connection to establish the connection. The "zPlus" app should launch automatically.
5. Maintenance
- Screen Cleaning: Use a soft, lint-free cloth to clean the touch screen. Avoid abrasive cleaners or solvents.
- Temperature: Avoid exposing the unit to extreme temperatures (very hot or very cold) for extended periods.
- Software Updates: Periodically check for software updates through the system settings to ensure optimal performance and access to new features.
6. Troubleshooting (FAQ)
Q1: What is the factory password?
A: The factory password is 000000.
Q2: The rear camera image is reversed (left to right). How can I fix it?
A: Go to Car Settings → General and toggle the "Rear Mirror" option to adjust.
Q3: Why is the factory rear camera image not clear?
A: The factory rear camera signal uses CVBS (360P), while this radio supports AHD (1080P). We recommend using the supplied camera for better image quality.
Q4: How do I turn off the camera's guideline?
A: Go to Car Settings → General and turn off "Reverse Line".
Q5: What should I do if the radio experiences issues like freezing and stuttering?
A: Go to Settings → System → Reset options → Erase all data (factory reset).
Q6: Is it possible to support Sirius XM radio?
A: The radio does not have a port for connecting a SiriusXM tuner. You may check the Play Store for an online Sirius XM Radio app, but compatibility with third-party apps is not guaranteed.
Q7: Does it support the factory microphone?
A: The factory microphone cannot be retained. Connect the external microphone to the 3.5mm port on the RCA cable. Install the microphone on the driver's side sun visor, facing the driver's face.
Q8: Can I use a voice assistant (Siri, etc.)?
A: The voice assistant can only be activated through your phone. Connect your phone to the radio via Bluetooth, Android Auto, or CarPlay, then use the voice assistant feature on your phone.
Q9: Why is the time not accurate?
A: Ensure your GPS antenna is properly connected (install on the A-pillar or outside the dash). Connect the radio to Wi-Fi or a hotspot, then go to Settings → System → Date and Time, and enable "Use network-provided time" and "Use network-provided time zone."
Q10: Why is the WiFi connection unstable?
A: Verify that the single yellow RCA camera port is properly connected to the radio, as adjacent small wires are for Wi-Fi and Bluetooth signals. Bluetooth and WiFi cannot be used simultaneously.
Q11: How do I change the custom boot logo/startup logo?
A: Download the desired image (1280x720 resolution, PNG format), rename it to "zxdzlogo", place it in the root directory of a USB drive, and insert it into the device. Go to Settings → System → About device → Local Update, select the logo, and start the upgrade. After the upgrade, go to Car Settings → Factory (password: 000000) → Dedicated logo settings → Boot Screen Logo to change the logo.
Q12: What should I do if the original car protocol-related information display or the original car-related settings show errors?
A: Select the corresponding car model according to the car model protocol selection chart. Connect the car radio to the internet, then go to Car settings → System → CAN Apk Update to complete the upgrade.
Q13: How do I use the offline map, navigation, and GPS functions?
A: Install the GPS antenna on the A-pillar or outside the dash. For GPS navigation, connect to Wi-Fi or a hotspot to use online navigation. For offline navigation, connect to Wi-Fi first to download maps to the radio's internal storage. Alternatively, use CarPlay or Android Auto for GPS/navigation.
Q14: Why doesn't the radio turn off after the car key is removed?
A: Contact after-sales support for a specific system update file to restore normal functionality.
Q15: Why is there no sound from the radio after installation?
A: Ensure that the red and white male "OUT L/R" connectors from the 16-pin CANBUS box are properly connected to the red and white female "AUDIO OUT" connectors on the RCA cable.
Q16: Why doesn't the radio turn on after installation?
A: If the radio does not power on after connecting Power Plug (A), try using Power Plug (B) instead. If the factory power connector does not include ACC and ILL wires, the unit must receive the power-on signal via CANBUS. In that case, connect the SM2.54mm female connector to the male connector (Power Plug A) from the CANBUS.
7. Specifications
| Feature | Specification |
|---|---|
| Display Size | 9" |
| Operating System | Android 13 |
| RAM | 4G |
| ROM / Max External Memory | 64G |
| Out Power | 4*45W |
| Voltage | 12 V |
| Item Weight | 2.5kg |
| Special Features | WiFi function, Support 4G Network, Built-in GPS, Split Screen, MP3 players, CarPlay, Voice Control, Android Auto, DSP, Reversing Input, Support steering wheel control, Support Can-Bus |
| Digital Media Format | MP4, Mp3, WMA, JPEG |
| OSD Language | Multi-language support (Simplified Chinese, Traditional Chinese, English, Arabic, German, Russian, French, Spanish, Portuguese, Japanese, Korean, etc.) |
| Certification | CE, FCC, WEEE, EAC, RoHS, KC |
| Material | Composite Material |
| Tuner Type | Support FM, AM (Optional) |
| Built-in DVD Player | No |
| Built-in CD Player | No |
| Touch Screen | Yes |
| Built-in Screen | Yes |
| Category | Combination product |
| TF/Micro SD Slot | 2 |
| Din Size | Double Din |
| Interface | USB/RCA |
| GPS Navigation Map | Built-in offline map, free update |
| AV-OUT | Need converter |
| Support AI Voice Control | Allows making phone calls, navigation, playing music (Optional) |
8. Warranty and Support
8.1. Warranty Information
This product comes with a 1-year warranty.
8.2. Technical Support
For further assistance, our team is available to help. You can access real-time expert support, updates on system upgrades, and user tips.
- Real-time expert support: Get assistance directly from our support team.
- Updates on system upgrades: Stay informed about the latest software enhancements.
- Tips & tricks shared by fellow users: Benefit from the community's knowledge.
Please refer to the official website for contact information and support resources.
9. User Tips
- GPS Antenna Placement: For optimal GPS performance, install the GPS antenna on the A-pillar of your car or just outside the dash. Avoid installing it inside the dash as it may hinder signal reception.
- External Microphone: If using the external microphone, place it on the driver's side sun visor with the head facing the driver's face for the best call quality.
- Accessory Check: Before initiating a return for missing accessories, double-check your package contents thoroughly.
- System Reset: If you experience freezing or stuttering, a factory reset (
Settings→System→Reset options→Erase all data) can often resolve the issue.