Opansten 3-in-1 Wireless Charger Stand

Contents

Opansten 3-in-1 Magnetic Wireless Charger Stand User Manual

Model: 3-in-1 Wireless Charger Stand

Introduction

Thank you for choosing the Opansten 3-in-1 Magnetic Wireless Charger Stand. This device is designed to provide convenient and efficient wireless charging for your iPhone, Apple Watch, and AirPods simultaneously. Please read this manual carefully before use and keep it for future reference.

Safety Precautions

To ensure safe and optimal operation, please observe the following:

  • It is recommended to use high-power adapters (above 20W) for a better charging experience.
  • This product features protection against overcurrent and overvoltage. If used improperly, the output power may be cut off or reduced. Please check if the equipment is abnormal or misused.
  • Maintain the working environment temperature between 0-35°C. Do not place the product in water, fire, high temperatures (above 40°C), or low temperatures.
  • Keep the product out of reach of children.
  • Use a dry soft cloth to clean the surface. Do not use chemical agents, soap, or detergents for cleaning.

Package Contents

Ensure all items are present in the package:

  • 1 x Opansten 3-in-1 Magnetic Wireless Charger Stand
  • 1 x USB-C to USB-C Charging Cable
  • 1 x User Manual

Setup Instructions

  1. Connect Power: Connect the provided USB-C to USB-C charging cable to the charger stand and to a power adapter. For optimal performance and fast charging, use a PD charger or a QC 3.0 car charger (or any adapter above 18W).
  2. Placement: Place the charger stand on a stable, flat surface. The design helps in organizing your charging area, transforming a messy setup into an orderly and tidy one.
Before and after image demonstrating improved cable management and tidiness with the 3-in-1 wireless charger.
Figure 1: Improved cable management with the charger stand.
Image showing the 3-in-1 wireless charger in use, charging an iPhone (with case), Apple Watch, and AirPods simultaneously.
Figure 2: Charger connected and in use, demonstrating simultaneous charging of three devices.

Operating Instructions

  1. Charging an iPhone: Place your iPhone (12 series or higher) onto the magnetic charging pad. The built-in premium magnets will auto-align for instant and accurate wireless charging. For iPhone 8-11 series, ensure your phone has a MagSafe or magnetic case for proper alignment. The charger supports phone cases up to 8mm (0.3in) thick.
  2. Charging an Apple Watch: Place your Apple Watch (Ultra/SE/S1 to S8 higher series) onto the dedicated magnetic watch charging pad. The high-quality PC shell and design ensure fast heat dissipation and safe charging.
  3. Charging AirPods: Place your AirPods (Pro/3/2 higher series with a wireless charging case) onto the charging pad located at the base of the stand.

The charger supports 360-degree rotation for the phone charging pad, allowing you to charge your device horizontally or vertically for optimal viewing.

Image displaying multiple 3-in-1 wireless chargers in different orientations, demonstrating 360-degree rotation for horizontal or vertical charging.
Figure 3: 360-degree rotation allows for charging in both horizontal and vertical orientations.
Image detailing universal compatibility for various Apple devices: iPhone 12/13/14/15 series (fast charging), iPhone 8-11 series (with MagSafe/Magnetic Case), AirPods Pro/3/2 (with wireless charging case), and Apple Watch Ultra/SE/S1-S8.
Figure 4: Universal compatibility for iPhone, Apple Watch, and AirPods.
Image showing the adaptive indicator light on the charger base, explaining its function to track charging progress.
Figure 5: Adaptive indicator light for tracking charging status.

Indicator Light: When the power is on, a subtle indicator light will illuminate on the base. This light allows you to track the charging progress at any time, providing real-time updates without being overly bright or disruptive, even in a bedroom setting.

Maintenance

  • Cleaning: Use a dry, soft cloth to gently wipe the surface of the charger. Do not use any chemical cleaners, soaps, or detergents, as these can damage the device.
  • Storage: Store the charger in a safe, dry place away from direct sunlight, extreme temperatures, and moisture.
  • General Care: Avoid dropping the device or subjecting it to strong impacts.

Troubleshooting

Problem Possible Cause Solution
Device not charging or charging slowly.
  • Incompatible or low-power adapter.
  • Device not properly aligned on the charging pad.
  • Phone case is too thick.
  • Foreign object detected.
  • Ensure you are using a PD charger or QC 3.0 adapter (18W or higher).
  • Re-position your device to ensure proper magnetic alignment.
  • Remove phone case or use a case no thicker than 8mm (0.3in).
  • Remove any metal objects or foreign materials between the device and charger.
Charger indicator light is off.
  • No power supply.
  • Cable connection issue.
  • Check if the power adapter is plugged into a working outlet.
  • Ensure the USB-C cable is securely connected to both the charger and the power adapter.
Charger feels warm during use.
  • Normal operation.
  • Overheating protection activated.
  • A slight warmth is normal during wireless charging.
  • The charger has a built-in Smart Chip 4.0 that monitors temperature 100,000 times daily to protect your devices' battery. If it overheats, it will automatically reduce power or shut down. Allow it to cool down before resuming use.
Image showing the charger's internal smart chip 4.0 for heat management and multiple protection features.
Figure 6: Smart Chip 4.0 for heat management and multiple protection.

Specifications

Feature Detail
Type Charging Stand, Charging Pad, Charging Station
Compatible Devices Phones (Apple iPhone), Smart Watches (Apple Watch), Earphones (AirPods)
Input 5V/3A, 9V/2A
Mobile Phone Wireless Charging Power 30W / 15W / 10W / 7.5W (Magnetic function optimized for iPhone 12-16 series)
Apple Watch Output Power 5W
AirPods Output Power 5W
Connector Type Type C
Features With Charging Indicator, With Cable, With Holder, Magnetic Wireless Chargers
Certifications RoHS, CE, FCC
Dimensions (Approx.) Height: 155mm (6.1in)
Base Diameter: 110mm (4.4in)
Phone Charging Pad Width: 59.6mm (2.3in)
Watch Charging Pad Diameter: 37mm (1.5in)
Overall Width: 145mm (5.7in)
Weight (Approx.) 0.31 kg
Color Options White, Black
Image showing the product dimensions: Height 155mm (6.1in), Base 110mm (4.4in), Phone charging pad width 59.6mm (2.3in), Watch charging pad diameter 37mm (1.5in), Overall width 145mm (5.7in).
Figure 7: Product dimensions.

User Tips

  • For the fastest charging speeds, always use a power adapter that provides at least 18W output, such as a QC 3.0 or PD charger.
  • Ensure your iPhone case is compatible with MagSafe and is not thicker than 8mm (0.3in) to guarantee optimal magnetic alignment and charging efficiency.
  • Take advantage of the 360-degree rotation feature to position your phone for comfortable viewing while it charges, whether for video calls or media consumption.
  • Keep the charging surfaces clean and free of dust or debris to maintain efficient power transfer.

Warranty and Support

For warranty information, technical support, or any product-related inquiries, please refer to the official product documentation or contact the seller directly. A detailed user manual in PDF format may also be available for download from the seller's website or via the following link: User Manual (PDF).

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.