1. Introduction
This manual provides detailed instructions for the installation, operation, and maintenance of your new Universal LED Car Hood Light Strip. This versatile LED strip is designed to enhance your vehicle's aesthetics and visibility, functioning as daytime running lights, headlight strips, or decorative atmosphere lamps. Please read this manual thoroughly before installation and use to ensure proper function and safety.
2. Safety Warnings
- Always turn off the vehicle's power supply before attempting any installation or wiring.
- Do not install or modify the LED strip while the vehicle is running or the ignition is on.
- Ensure all wiring connections are secure and properly insulated to prevent short circuits.
- Avoid frequently switching the light on/off, as this can reduce the service life of the LED strip.
- If you are unsure about any installation steps, consult a professional automotive technician.
3. Package Contents
Your package should contain the following items:
- 1x LED Strip (Length: 120CM, 150CM, or 180CM, depending on selection)
- Wiring harness
- Double-sided adhesive tape for installation
4. Specifications
| Feature | Detail |
|---|---|
| Product Name | LED Car Hood Light Strip |
| Model | GM |
| Item Type | Atmosphere lamp |
| Light Source | LED |
| Voltage | 12 V |
| Lumen | 3000LM |
| Product Power Consumption | 10W/m |
| Available Lengths | 120CM, 150CM, 180CM (Cuttable) |
| Light Colors | White, Blue, Ice Blue, Red, Pink, Purple, Green, Golden Yellow |
| Material | Silicone |
| Features | Start sequential scan mode, Breathing mode, Meteor Mode, Non-destructive installation, High flexibility, Completely fit, Fully sealed design, Improve driving safety |
| Package Dimensions | 24cm (L) x 23cm (W) x 3cm (H) |
| Package Weight | 0.11 kg |
5. Installation
Follow these steps for proper installation of your LED Car Hood Light Strip:
- Prepare the Surface: Ensure the installation area on your car's hood is clean and dry.
- Measure and Cut (if necessary): The LED strip is designed to be cuttable. Measure the desired length for your installation. Cut the light bar at the designated cutting points. The tail rubber cover can be reused after cutting.
- Apply Double-Sided Tape: Apply the provided double-sided tape to the two inner sides of the car's hood cover where the light strip will be mounted.
- Attach the Light Bar: Carefully fix the LED light bar onto the double-sided tape, ensuring it is straight and securely attached.
- Wiring Connections:
- Connect the red wire to the ACC (Accessory) power source or a small light wire.
- Connect the black wire to the negative electrode of the battery or a suitable ground point (e.g., tower iron).
Wiring Options:
- If the red wire is connected to ACC, the light will turn on when the engine starts.
- If the red wire is connected to DRL (Daytime Running Light) power, the light will turn on with the DRLs.
- Safety Note: The ideal position for the light strip is on the side near the glass for optimal visibility and aesthetic integration.
- Test Functionality: After installation, start the vehicle to test whether the light functions normally and as expected.
6. Operation
The LED Car Hood Light Strip offers various dynamic lighting modes:
- Start Sequential Scan Mode: Upon vehicle startup, the lights will perform a sequential scanning effect.
- Breathing Mode: The lights will gently fade in and out, creating a breathing effect.
- Meteor Mode: A dynamic lighting pattern resembling a meteor shower.
The specific mode displayed may depend on the wiring configuration and the product variant. The lights are designed to automatically activate based on the chosen power source (ACC or DRL).
7. Maintenance
To ensure the longevity and optimal performance of your LED Car Hood Light Strip:
- Keep the LED strip clean from dirt and debris. Use a soft, damp cloth for cleaning.
- Avoid using harsh chemicals or abrasive cleaners on the light strip.
- Minimize frequent switching on and off of the lights, as this can reduce their lifespan.
- Regularly check wiring connections for any signs of wear or damage.
8. Troubleshooting
If you encounter issues with your LED Car Hood Light Strip, refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Light does not illuminate | Loose or incorrect wiring connections, damaged LED strip, insufficient power supply. | Check all wiring connections to ensure they are secure and correctly connected (red to positive/ACC/DRL, black to negative/ground). Inspect the LED strip for any visible damage. Verify the vehicle's power supply is active. |
| Lights flicker or are dim | Unstable power connection, low voltage, faulty wiring. | Ensure a stable 12V power supply. Recheck wiring connections for any loose points. |
| Only part of the strip lights up | Damage to a section of the LED strip, improper cutting. | Inspect the non-illuminated section for physical damage. Ensure cuts were made only at designated points. |
9. User Tips
- For a seamless look, consider routing wires discreetly within the engine bay or under trim pieces.
- Before permanently affixing the strip, temporarily connect it to test the desired placement and ensure the length is correct.
- When cutting the strip, use sharp scissors and ensure the cut is clean to avoid damaging the circuit.
- The fully sealed design makes the strip waterproof, but avoid submerging it or exposing connections to excessive moisture.
10. Warranty and Support
Returns and replacements are available during the warranty period. For any issues, technical support, or warranty claims, please contact customer service through your purchase platform. Provide your order number and a detailed description of the problem for faster assistance.
For additional information, you may refer to the official user manual PDF: View User Manual (PDF)