Coolo ZM-CG205

Contents

Coolo Tuya Zigbee 3.0 Smart Door Sensor User Manual

Model: ZM-CG205

Introduction

The Coolo Tuya Zigbee 3.0 Smart Door Sensor is designed to enhance your home security by detecting the open/close status of doors and windows. This device works with a Zigbee gateway (such as Tuya or eWeLink ZigBee Gateway Hub) to provide real-time notifications, app control, and can integrate with smart home platforms like Alexa and Google Home for voice alarms. It is an essential component for a comprehensive smart home security system.

Coolo Tuya Zigbee 3.0 Smart Door Sensor on a door, showing Tuya and Smart Life compatibility, open/close status, real-time notifications, and app control.
The Coolo Tuya Zigbee 3.0 Smart Door Sensor, highlighting its features and compatibility.

Setup

1. Power On the Product

  1. Open the battery cover.
  2. Remove the battery insulation film to power on the product.
Diagram showing the CR2032 battery compartment and how to open it.
Illustration of opening the battery cover and accessing the CR2032 battery compartment.

2. Installation Instructions

Install the product on a door or window. The main body should be fixed on the door or window frame. Use the provided 3M sticker to affix the product. Ensure the installation surface is smooth, flat, dry, and clean.

  • Align the main body and magnet with the alignment mark, ensuring they are within 15mm of each other when the door/window is closed.
  • The installation position is for reference only.
Diagram showing installation alignment marks for the door/window sensor.
Diagram illustrating the correct alignment and maximum sensing distance (15mm) for the sensor components.

3. Network Configuration

This device requires a Zigbee gateway to function. You need to connect the sensor to a Tuya Zigbee gateway successfully before use. The sensor does not work alone.

  1. Press the RESET button for 3 seconds and release. The red LED will flash, indicating it is ready for network configuration.
  2. Follow the instructions in your Zigbee gateway's app (Tuya Smart or Smart Life) to add the device.
Diagram illustrating that a Tuya Zigbee Hub is required for the sensor to work, showing the sensor connecting to the hub, which then connects to the internet and a mobile app.
Visual representation of the sensor connecting to a Tuya Zigbee Hub, which then communicates with the mobile app.

Operating

Function Description

  • Remote Monitoring: Receive alerts on your mobile app once a door or window is opened or motion is detected.
  • Real-time Notifications: Get instant push messages to your smartphone when the sensor is triggered.
  • App Control: Monitor and manage the sensor's status through the Tuya Smart or Smart Life mobile application.
  • Voice Alarm: Integrate with smart home platforms like Alexa or Google Home to receive voice announcements when the sensor is triggered.
  • Status Feedback: Check the current open/close status of doors and windows via the mobile app.
  • Low Power Warning: The Tuya app will send messages to remind you to replace batteries when power is low.
  • Scene Linkage: Create smart scenes and automations within the app, linking the sensor's status to other smart devices.
Smartphone receiving a real-time notification when a door is opened, demonstrating remote monitoring.
Remote monitoring feature showing a smartphone receiving an alert when a door is opened.
Smart speaker announcing 'The front door is open!', illustrating the voice alarm feature.
Voice alarm functionality, where a smart speaker announces the status of a door.
Smartphone app displaying the status (open/closed) and battery level of the door sensor.
Mobile application interface showing the real-time status and battery level of the sensor.
Smartphone app displaying a 'Low battery warning' for the door sensor.
Screenshot of the mobile app displaying a low battery warning for the sensor.
Diagram illustrating the working status of the sensor, showing a 'Closed door' and an 'Opened door' with the sensor components separated.
Diagram showing the sensor's state for a closed door (components together) and an opened door (components separated).
A collage of images showing various features: Zigbee connection, status feedback, low battery reminder, news push (notifications), scene linkage, and remote monitoring.
Overview of key features including Zigbee connection, status feedback, low battery reminders, notifications, scene linkage, and remote monitoring.

Maintenance

Battery Replacement

The sensor uses a CR2032 button battery. When the app indicates a low battery warning, replace the battery promptly to ensure continuous operation. Refer to the 'Power On the Product' section for instructions on opening the battery cover.

Cleaning

To maintain optimal performance, periodically clean the sensor's exterior with a soft, dry cloth. Do not use harsh chemicals or abrasive materials. Ensure the installation area remains clean and free of obstructions.

Troubleshooting

  • Sensor not connecting to gateway: Ensure the Zigbee hub is powered on and within range. Press the sensor's RESET button for 3 seconds to re-enter pairing mode.
  • No notifications received: Check your mobile app settings to ensure notifications are enabled for the Tuya Smart or Smart Life app. Verify the sensor is properly connected to the gateway.
  • Inaccurate status detection: Ensure the main body and magnet are installed correctly and are within the 15mm sensing distance when closed.
  • Sensor not triggering a loud alarm: The sensor itself does not emit a loud alarm; it sends notifications to your app and can trigger voice alarms via integrated smart speakers. For a loud alarm, integrate with a compatible siren through your smart home system.
  • Alexa integration issues: Note that Alexa integration may require an Amazon Echo ZigBee hub and might not support current status checks directly, depending on the specific Alexa skill and device capabilities.
  • 433MHz version: If you have the 433MHz version, it must be connected to a 433 gateway to function properly and upload data to the server/APP.

Specifications

Attribute Value
Product Name Door & Window Sensor
Product Model ZM-CG205
Wireless Protocol Zigbee/433MHz (Optional)
Sensing Distance ≤15mm
Working Voltage DC 3V
Battery Type CR2032
Standby Current ≤10uA
Operating Temperature -10°C ~ 55°C
Operating Humidity 0% ~ 99% RH
Product Size (Main body) 50 x 25 x 11 mm
Product Size (Magnet) 30 x 15 x 10 mm
Table of product specifications including product name, model, wireless protocol, sensing distance, working voltage, battery type, standby current, operating temperature, operating humidity, and product size.
Detailed product specifications for the door and window sensor.

User Tips

  • This sensor is highly compatible and works well with Zigbee Home Assistant for reliable performance.
  • Installation is quick and easy, making it convenient for various applications.
  • The sensor provides clear open/close feedback via a red LED indicator.
  • Expect consistent notifications and excellent overall functionality.
  • Consider using Zigbee2MQTT for Home Assistant integration, as some users have noted ZHA might not be ideal.

Warranty and Support

This product comes with a standard manufacturer's warranty. For detailed warranty information, technical support, or further assistance, please refer to the official product documentation or contact the seller directly. A user manual in PDF format is available for download: User Manual (PDF).

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.