Audi LED Projector Laser Lamp

Contents

Audi Car Door Welcome Light LED Projector Lamp Instruction Manual

Enhance your vehicle's entry experience with a projected welcome light.

1. Product Overview

The LED Projector Laser Lamp is designed to replace your car's original door lights, projecting a clear and vibrant welcome logo onto the ground when the door is opened. This product features high-definition projection, a durable design, and easy, non-destructive installation.

Audi Car Door Welcome Light LED Projector Lamp installed in a car door, projecting a logo onto the ground.

Figure 1: Audi Car Door Welcome Light LED Projector Lamp installed in a car door, projecting a logo onto the ground.

2. Specifications

FeatureSpecification
Voltage12-16V
ColorWhite
Power Consumption7W
MaterialABS+LED
Item Weight41g
Item TypeWelcome Light
Model NameCar Door Light
Special FeaturesAudi Light
Package Dimensions (L x W x H)11cm x 4cm x 4cm
Package Weight0.05kg

2.1. Compatibility

This product is compatible with the following Audi models (2000-2024, unless otherwise specified):

  • A1 (2012-2023)
  • A3 (2010-2023)
  • A4 (2003-2023)
  • A5 (2008-2023)
  • A6 (2000-2023)
  • A7 (2012-2023)
  • A8 (2004-2023)
  • R8 (2007-2023)
  • Q3 (2012-2023)
  • Q5 (2010-2023)
  • Q7 (2006-2023)
  • Q8 (2018-2023)
  • TT (2008-2023)
  • SQ5 (2014-2024)
  • S3/S4/S5/S6/S7/S8/RS3/RS4/RS5/RS6/RS7 (2012-2023)

Note: Not applicable if the car does not have original door lights.

Dimensions of the LED Projector Laser Lamp: 6.35cm (2.5 inches) length, 2.8cm (1.1 inches) width, 1.5cm (0.6 inches) height.

Figure 2: Product dimensions for proper fitment.

Close-up view of two LED Projector Laser Lamps, showing their design and connectors.

Figure 3: Close-up of the LED Projector Laser Lamp units.

3. Package Contents

  • 2 x LED Projector Laser Lamp units

4. Installation Guide

Follow these steps to install your new car door welcome lights. It is recommended to watch the installation video for a visual guide.

  1. Preparation: Turn off the vehicle's power supply.
  2. Locate Installation Position: Find the installation position at the inner bottom of the car door.
  3. Remove Old Components: Carefully remove any existing old door light components from the designated slot.
  4. Connect Wiring: Align the new welcome light with the installation position. Connect the positive and negative poles of the welcome light to the corresponding positive and negative poles of the door light power cord. Ensure correct polarity.
  5. Secure Unit: Secure the welcome light firmly into the installation slot.
  6. Test Functionality: Open the car door to check if the light turns on normally, if the projected pattern is clear, and if the installation position is appropriate.

Video 1: Step-by-step installation process for the car door welcome light.

Diagram showing the non-destructive installation process, highlighting the ease of replacement without damaging the car.

Figure 4: Illustration of the non-destructive installation method.

5. Operating Instructions

The LED Projector Laser Lamp operates automatically. Once installed, the light will activate and project the chosen logo onto the ground when the car door is opened. The light will turn off automatically when the door is closed.

6. Maintenance

To ensure the longevity and optimal performance of your welcome lights, follow these maintenance guidelines:

  • Cleaning: Regularly clean the projector lens with a soft, dry, lint-free cloth to remove dust and debris. Avoid using abrasive cleaners, solvents, or harsh chemicals, as these can damage the lens or housing.
  • Inspection: Periodically check the lights for any signs of wear or damage. Ensure they are securely seated in their installation position.
  • Avoid Overheating: The product features a cooling design to prevent overheating. However, ensure no obstructions block the ventilation areas.
Diagram highlighting key features of the door light: cooling design, no overheating, plug and play, HD projection, and durability.

Figure 5: Key features for product durability and performance.

7. Troubleshooting

If you encounter any issues with your LED Projector Laser Lamp, refer to the following common problems and solutions:

  • Light Does Not Turn On:
    • Check the power connection to ensure it is secure and correctly wired (positive to positive, negative to negative).
    • Verify that the vehicle's power supply is active.
    • Ensure the car has original door lights, as this product is not applicable otherwise.
  • Projected Pattern is Unclear or Fading:
    • Clean the projector lens carefully with a soft cloth to remove any dirt or smudges.
    • Ensure the light is securely installed and properly aligned within the door slot.
    • Check the projection lens for any damage (refer to Figure 6 for lens details).
  • Light Flickers or Behaves Erratically:
    • Inspect all wiring connections for looseness or corrosion.
    • Ensure the voltage supply is stable and within the specified 12-16V range.

If problems persist after attempting these solutions, it is recommended to consult a professional automotive technician or refer to the detailed user manual PDF for further guidance.

Diagram showing the high-definition projection lens components, emphasizing high light transmission, no color fading, and accurate color reproduction.

Figure 6: High-definition projection lens details.

8. User Tips

  • Before installation, double-check your car's model and year against the compatibility list to ensure a perfect fit.
  • When removing the old light, use a non-marring pry tool to avoid scratching your car's interior.
  • Ensure the wiring connections are firm to prevent intermittent operation.

9. Warranty and Support

For detailed warranty information, technical support, or to access the full user manual, please refer to the official product documentation. A comprehensive user manual in PDF format is available for download: User Manual (PDF).

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.