Safety & Warnings
Read all instructions before use. Failure to follow these instructions may result in damage to the product or personal injury.
- Keep the device and its cord out of reach of children under 3 years old.
- Keep away from children unless supervised by an adult.
- Do not use this product for purposes other than its intended use.
- Inspect the product before each use; do not use if damaged.
- Follow installation and operation guidelines to avoid injury.
- Do not expose to water or moisture.
WARNING: KEEP OUT OF REACH OF CHILDREN. Swallowing button batteries can lead to chemical burns, perforation of soft tissue, and death. Severe burns can occur within 2 hours of ingestion. Seek medical attention immediately.
Product Overview
The GGbingo BG1087SS is a stylish and portable LED table lamp designed for various indoor and outdoor settings. It features touch control for dimming and switching between three color temperatures, powered by a built-in rechargeable battery.
Components
- Crystal Acrylic Lampshade: Provides diffused and decorative lighting.
- Metal Lamp Post: Sturdy and elegant support for the lampshade.
- Base: Stable foundation for the lamp, housing the battery and electronics.
- Touch Control Sensor: Located on top of the lampshade for operation.
- Type-C Charging Port: For recharging the internal battery.
- Bottom Power Switch: Main power control for the lamp.
Specifications
| Feature | Detail |
|---|---|
| Model Number | BG1087SS |
| Lamp Type | Table Lamp |
| Material | Wrought Iron + Acrylic |
| Dimensions (L*W*H) | 14.5 cm * 14.5 cm * 31.5 cm |
| Shell Color | Golden |
| Light Source | LED bulbs |
| Light Colors (CCT) | 3 Colors (3000K Warm, 4000K Neutral, 6000K White) |
| Dimmable | Yes (Touch Control) |
| Voltage | 5V |
| Power | 1.2W |
| Control Method | Touch Control |
| Battery Capacity | 3000mAh |
| Power Source | Rechargeable battery |
| Interface | USB Type C |
| Luminous Flux | 60-249 lumens |
| Finish Type | Polished |
Setup Instructions
- Unpack: Carefully remove the table lamp and USB charging cable from its packaging.
- Initial Charge: Before first use, fully charge the lamp using the provided USB Type-C cable and a compatible 5V USB power adapter (not included). The charging port is located on the base.
- Activate: Locate the main power switch on the bottom of the lamp's base. Flip the switch to the 'ON' position before operating the lamp.
Operating Instructions
- Power On/Off: Ensure the bottom switch is in the 'ON' position. Tap the touch control sensor on the top of the lampshade to turn the lamp ON or OFF.
- Switching Light Modes: With the lamp on, tap the touch control sensor to cycle through the three available light color temperatures: 3000K Warm Light, 4000K Neutral Light, and 6000K White Light.
- Adjusting Brightness: With the lamp on, long-press the touch control sensor. The brightness will gradually increase or decrease. Release your finger when the desired brightness level is reached.
Video 1: Demonstration of Touch Control for Light Modes and Brightness
Maintenance
- Cleaning: Wipe the lamp with a soft, dry cloth. Do not use abrasive cleaners, solvents, or harsh chemicals, as these may damage the finish or acrylic.
- Battery Care: To prolong battery life, avoid completely draining the battery frequently. Recharge the lamp regularly, even if not in constant use.
- Storage: If storing the lamp for an extended period, ensure it is fully charged and then turn the bottom switch to the 'OFF' position. Store in a cool, dry place away from direct sunlight.
Troubleshooting
- Lamp does not turn on:
- Ensure the main power switch on the bottom of the base is in the 'ON' position. Check if the battery is charged; connect to a power source using the USB-C cable.
- Cannot change light modes:
- Make sure the lamp is on. Tap the touch control sensor firmly and briefly. If the issue persists, try turning the lamp off and on using the bottom switch.
- Brightness adjustment is not working:
- Ensure the lamp is on. Perform a long-press on the touch control sensor. The brightness should gradually change. If it doesn't respond, try turning the lamp off and on.
- Lamp is not charging:
- Verify that the USB Type-C cable is securely connected to both the lamp and the power adapter. Try using a different USB cable or power adapter to rule out faulty accessories.
User Tips
- For optimal performance, fully charge the lamp before its initial use.
- Utilize the dimming feature to extend battery life when full brightness is not required.
- The lamp's portable design makes it versatile for various uses, from a bedside night light to ambient lighting for dining or outdoor relaxation.
- Keep the charging port clean and free from dust to ensure efficient charging.
Warranty & Support
This product comes with a 6-month warranty from the date of purchase.
Manufacturer Information:
- Manufacturer: Jiangmen Honghui Lighting Co., Ltd
- Contact No: +8615361791976
- Email: PalijAmarar@outlook.com
- Address: N5th Floor, Building 4, No.133, Jiangmu Road, Jianghai District, Jiangmen City, Guangdong Province, China
EU Authorized Representative:
- Name: Apex CE Specialists GmbH
- Email: Info@apex-ce.com
- Address: Habichtweg 1 41468 Neuss Germany
For further assistance or to view the original user manual PDF, please refer to the document provided by the seller or contact the manufacturer directly. The PDF manual can be found at: User Manual (PDF)