FEELWORLD L2 PLUS

Contents

FEELWORLD L2 PLUS Multi-camera Video Switcher

User Manual

1. Introduction

Thank you for choosing the FEELWORLD L2 PLUS Multi-camera Video Switcher. This manual provides detailed instructions to help you quickly set up, operate, and utilize all the features of your device. Please read all directions and instructions carefully before using this product.

1.1 Product Overview

The FEELWORLD L2 PLUS is a portable, full-featured live switching and streaming solution equipped with a 5.5-inch LCD touch screen. It supports real-time monitoring, special effects switching, live streaming, audio insertion, independent input format conversion, PTZ camera control based on VISCA protocol, Chroma Key, and LOGO overlay. The L2 PLUS can control up to 8 PTZ cameras simultaneously, including zoom in/out operations. It is compatible with Windows, MAC, iOS, and Android operating systems for versatile control.

FEELWORLD L2 PLUS Multi-camera Video Switcher in use, showing multiple video inputs and live streaming logos.

Image: FEELWORLD L2 PLUS Multi-camera Video Switcher in a live streaming setup.

1.2 Key Features

  • USB3.0 for fast live streaming
  • 4 HDMI inputs
  • 5.5-inch touch screen for easier operation
  • Auto cut and manual switch (T-Bar)
  • 15 transition effects, 9 layers PIP mode
  • Audio offers AFV or Line In mode
  • Supports mixing any 2 audios from HDMI 1~4 and LINE IN
  • Supports switching between 6-Picture PVW and PGM to HDMI Out
  • Control via Feelworld Live software
  • Compact design
  • Logo overlay
  • Chroma Key
  • PTZ control
Icons representing key features: 5.5 inch touch screen, multi-camera operation, USB3.0 live streaming, PTZ camera control, Chroma Key, multiple transition effects/PIP, PC/Phone APP remote control, audio embedding.

Image: Visual representation of the L2 PLUS's key features.

2. Safety Instructions

The following general safety information is for operating personnel. Please read carefully to prevent injury or damage to the equipment.

  1. There are no user-serviceable parts within the unit. Removal of the top cover will expose dangerous voltages. To avoid personal injury, do not remove the top cover. Do not operate the unit without the cover installed.
  2. Do not use chemical solutions to clean this product. Wipe the switcher with a clean, soft cloth to maintain the brightness of the surface.
  3. This product comes with a standard 12V/2A power adapter. Use the power supply correctly.
  4. To avoid explosion, do not operate this product in an explosive atmosphere.

2.1 Installation Safety Summary

For all product installation procedures, observe the following important safety and handling rules to avoid damage to yourself and the equipment. To protect users from electric shock, ensure that the chassis connects to earth via the ground wire provided in the AC power Cord. The AC Socket-outlet should be installed near the equipment and be easily accessible.

2.2 Unpacking and Inspection

Before opening the product shipping box, inspect it for damage. If you find any damage, notify the shipping carrier immediately for all claims adjustments. As you open the box, compare its contents against the packing slip. If you find any shortages, contact your sales representative. Once you have removed all the components from their packaging and checked that all the listed components are present, visually inspect the system to ensure there was no damage during shipping. If there is damage, notify the shipping carrier immediately for all claims adjustments.

2.3 Site Preparation

The environment in which you install your product should be clean, properly lit, free from static, and have adequate power, ventilation, and space for all components.

3. Setup

3.1 Front Panel

The front panel of the L2 PLUS features a 5.5-inch LCD touch screen and various control buttons and a T-Bar for switching and menu navigation.

Diagram of the L2 PLUS front panel with labeled controls: LCD screen, signal buttons (1-4), Knob, SW button, MENU button, T-Bar.

Image: L2 PLUS Front Panel Diagram.

Front Panel Connectors and Description
No. Connector Description
1 LCD screen 5.5-inch touch screen for menu operation
2 Signal button (1-4) Lights indicate signal status: Red (on air), Static Green (standing by), Flashing Green (ready to switch), No light (input not supported).
3 Knob Turn to select menu items or adjust parameters, push to confirm.
4 MENU Main menu and back button.
5 SW Function menu.
6 T-Bar Manual switching. Push to top or bottom end to switch signal to PGM. (Note: Signal cannot be switched if T-Bar is not at an end position).

3.2 Interface Panel

The rear interface panel provides various ports for connecting video, audio, and control devices.

Diagram of the L2 PLUS rear interface panel with labeled ports: HDMI Input 1-4, HDMI Output, DC 12V, LAN, USB, Audio In, Audio Out.

Image: L2 PLUS Interface Panel Diagram.

Interface Panel Connectors and Description
No. Connector Description
1 HDMI IN 4 HDMI Inputs, connect to input sources from HD cameras or PCs.
2 HDMI OUT 1 HDMI Output, connect to a display to show Preview (6 pictures) or PGM.
3 DC 12V 1 DC Jack for power input, connect to 12V/2A power adapter.
4 LAN Communication port to link dedicated software for control.
5 USB USB3.0 output, capture signal via third-party streaming software and push to live broadcasting websites.
6 AUDIO IN/OUT AUDIO In: analog audio input port, connect to microphone. AUDIO OUT: analog audio output port, connect to loudspeaker.

3.3 Plug in Power

When connecting the power supply, ensure the power supply standard matches your country/region. If using a power supply without a lock, tighten the power connector to ensure stability. Use the provided 12V/2A power adapter.

Image showing the power switch and DC 12V input on the L2 PLUS.

Image: Power connection and switch.

3.4 Connect HDMI Input

The L2 PLUS supports up to 4 HDMI inputs, allowing you to connect cameras, computers, or other HDMI devices. It supports up to 1080P standard and can handle 4 sources of different formats and resolutions simultaneously.

Diagram showing various devices like PC, Laptop, Camera, and DVD player connected to the HDMI IN ports of the L2 PLUS.

Image: Connecting HDMI input sources.

3.5 Connect HDMI Output

The HDMI output can be used as a pre-monitoring interface, displaying a 16:9 6-picture split preview. A preset function is also available.

A monitor connected to the L2 PLUS showing a 6-picture preview of multiple video inputs.

Image: HDMI output displaying a 6-picture preview.

3.6 Connect Microphone and External Monitoring Devices

A standard 3.5mm microphone jack (Audio In) is provided for independent input of active (self-powered) microphones, useful for interviews. An external sound console can be used to mix multiple external sound inputs. A standard 3.5mm audio output (Audio Out) allows monitoring the main output audio signal in real-time via external speakers or headphones.

Diagram showing a microphone connected to Audio In and a loudspeaker connected to Audio Out on the L2 PLUS.

Image: Connecting audio input and output devices.

3.7 Connect USB as a Network Signal Source

The L2 PLUS's USB port allows it to function as a webcam source. It can be recognized by live streaming platforms like Zoom, YouTube, Facebook, Twitch, OBS, etc.

L2 PLUS connected via USB to a laptop, showing the LAN and USB ports.

Image: L2 PLUS connected to a laptop via USB for streaming.

3.8 Connect Computer and L2 PLUS for Software Control

For software control, connect the computer and L2 PLUS with a CAT6 cable. For recording and streaming, connect the L2 PLUS's USB-A port to the computer's USB 3.0 port with a USB3.0 cable (Note: USB 3.0 ports are typically blue). The L2 PLUS is recognized as a webcam signal in Windows and MAC systems.

Minimum System Requirements for macOS:

  • macOS 11.0 Big Sur or later
  • macOS 10.15 Catalina

Minimum System Requirements for Windows:

  • Microsoft Windows 10 64-bit

Note: If your computer only has a Type-C port, use a USB-A to Type-C cable that supports data transmission. The IP address of the L2 PLUS must be in the same WLAN segment as the computer or mobile control device.

3.9 Turn on Your L2 PLUS

After linking the power, press the power button. The device will enter the boot interface upon turning on.

L2 PLUS boot screen displaying 'L2 PLUS FEELWORLD'.

Image: L2 PLUS boot screen.

4. Operating Instructions

4.1 Touch Screen Operation

The 5.5-inch touch screen on the front panel displays 4 input sources, PST preview, and PGM output. You can interact with the screen as follows:

  • Gently tap one of the four input signal pictures to switch the input signal.
  • Long press any position on the screen to switch PGM to full screen.
  • Long press again to return to the six-picture preview.
  • Click PST preview to switch A/B layer.
A hand interacting with the L2 PLUS touch screen to switch input sources.

Image: Touch screen operation for switching inputs.

To access menus, gently press the MENU or SW key. The menu will appear in the center of the LCD screen. Use the knob on the upper right corner to select menu items or adjust parameters, then push to confirm. A shortcut key combination of SW + MENU brings up the volume setting menu, where the knob can adjust the volume.

4.2 Main Menu Navigation

After powering on, press the MENU button to enter the main menu. Options include Input, HDMI, USB 3.0, Audio, IP Setting, and Settings. Tap the 'X' icon to exit the main menu.

  • Input: Displays information about the input signal sources. Shows 'NO INPUT' if no source is detected. Allows toggling DEINTERLACE ON/OFF.
  • HDMI: Select output (PVW/PGM) and format (up to 1920x1080@60).
  • USB3.0: Select output (PVW/PGM) and format (up to 1920x1080@60).
  • Audio: Adjust volume (0-100), select source (AFV/HDMI1~4/LINE IN), mix (OFF/HDMI1~4/LINE IN), external type (LINE IN/MIC), and audio bar display (ON/OFF). You can mix any 2 audios from HDMI 1~4 and LINE IN.
  • IP Setting: Configure IP address manually or automatically (DHCP).
  • Settings: Adjust language (English/Chinese), fan speed (0-3), LCD backlight (1-100), menu timeout (OFF/15S/30S/45S/60S), and perform a reset (NO/YES).

4.3 Function Menu

Press the SW button to enter the function menu, which includes MIX, MODE, PIP, PTZ, LOGO, and CHROMA KEY. Press SW again to exit.

  • MIX: Offers 15 kinds of transition effects. In actual use, hard cut is only available in Quick Cut mode; in T-Bar mode, it automatically changes to FADE.
  • MODE: Select between FAST or T-BAR transition modes. Switching time can be set from 0.5s to 5.0s. In T-Bar mode, you can manually control the transition progress.
  • PIP (Picture-in-Picture): Provides 9 PIP modes. Select the main picture (A) and sub-picture (B) from inputs 1/2/3/4, choose a PIP layout, and then use the T-Bar to apply the effect.
  • PTZ (Pan-Tilt-Zoom) Camera Control: The L2 PLUS can control up to 8 VISCA protocol-supported PTZ cameras. You can move, zoom, and focus cameras, and save positions for quick retrieval. Ensure the L2 PLUS remains in the Control interface when operating PTZ cameras.
  • LOGO Overlay: Enable and adjust the position of a custom logo. If setting a logo for the first time, refer to the Feelworld Live software section for importing images.
  • Chroma Key: Enable Chroma Key and select a base color (orange, yellow, green, cyan, blue, purple) to remove. Adjust MAX, MIN, and MARGIN values for precise keying. When using Chroma Key, ensure the layer to be edited is on the top layer (B layer in PIP setting) for the effect to be visible.
Image showing a person in front of a green screen, with the L2 PLUS displaying the chroma key effect, replacing the green screen with a virtual background.

Image: Chroma Key function in action.

4.4 Switch Source

When accessing the four source buttons, their lights indicate status:

  • Green constant: Signal recognized, no action taken.
  • Green flashing: Currently selected, signal being edited.
  • Red constant: Signal currently on the main output.
  • Unlit: Source not accessed or resolution not supported.

In FAST+Time Mode:

  1. Press a green source button (1, 2, 3, or 4).
  2. The selected source will switch to the output with the set fade TIME and MIX transition. The pressed source button will turn red.

Slide the T-BAR to switch:

  1. Press a green source button (1, 2, 3, or 4).
  2. Slide the T-Bar from top to bottom end or reversely.

Note: Source selection is locked when the T-BAR is in transition (not entirely docked at a top or bottom position).

5. Streaming

The L2 PLUS features a USB 3.0 connection that operates as a simple webcam source, making it compatible with various streaming software for social media platforms.

Video: FEELWORLD L2 PLUS Multicam Livestream Video Switcher demonstration.

5.1 OBS Streaming

The L2 PLUS is compatible with third-party streaming software like OBS. Download OBS from obsproject.com/download and update to the latest version.

Video Capture Setup:

  1. In OBS, click the '+' icon under 'Sources'.
  2. Choose 'Video Capture Device'.
  3. Click 'Video Capture Device' to open its settings page.
  4. Select 'FEELWORLD USB 3.0 Capture'.
  5. Choose 'Video Format YUY2'.

Note: If 'Video Format YUY2' is not available, check the USB 3.0 port connection. Ensure it's linked to a USB 3.0 port (typically blue) on your PC with a USB 3.0 cable. If captured, change the video format to YUY2.

Audio Setting Setup:

If no audio is playing, first check if the video source is set to default. Then check OBS audio settings.

  1. Set 'Default' for the audio source in your system sound settings.
  2. In OBS, go to 'Settings' -> 'Audio' and choose 'Mic/Auxiliary Audio Device'.

Synchronize Video with External Audio:

If your video lacks embedded audio and requires external audio, follow these steps:

  1. Set the audio source: 'Settings' -> 'Audio' -> 'Mic/Auxiliary Devices'.
  2. Right-click the 'Video Capture Device' in 'Sources' and choose 'Filter'.
  3. Click '+' under 'Audio/Video Filters' and choose 'Video Delay (Async)'.
  4. You can customize the filter name. Click 'OK'.
  5. Input a delay value in milliseconds. Adjust until video and audio are synchronous.

Streaming Setup:

  1. Obtain the RTMP URL and Stream Key from your streaming broadcast website.
  2. Copy the URL and Stream Key.
  3. In OBS, click 'Settings' (lower right corner) and then 'Stream'.
  4. Choose 'Stream Type' as 'Streaming Service' or 'Custom Streaming Server'. If using 'Streaming Service', select your provider from the list. If using 'Custom Service', input the URL and Stream Key.
  5. Paste the RTMP URL into 'Server' or 'URL' and the Stream Key into 'Stream Key'.
  6. Click 'Start Streaming'.

Note: H.265 and OBS cannot work simultaneously. Choose either H.265 or OBS, not both.

5.2 vMix Streaming

To stream using vMix:

  1. Click a new blank space, then click 'Add Input'.
  2. Select 'Camera' -> 'Camera' -> 'FEELWORLD USB3.0 Capture'.
  3. Select the same resolution as the L2 PLUS output. Click 'OK'.
  4. Click the 'Stream' setting button.
  5. Complete the URL and Key information. Click 'Start 1'. vMix will begin streaming.

Note: vMix does not support automatic recognition of the L2 PLUS's output resolution. If the L2 PLUS output resolution is modified, the picture on vMix will pause. You will need to re-select 'FEELWORLD USB3.0 Capture' and manually input the current output resolution in vMix.

6. Feelworld Live Software Operation

Feelworld Live software simulates the L2 PLUS's hardware interface, allowing for remote control from a computer or mobile device. The operations are similar to those performed directly on the L2 PLUS hardware.

6.1 Connect L2 PLUS and Computer

6.1.1 Direct Link via a Network Cable

The L2 PLUS connects to a computer via TCP/IP. To avoid IP conflicts, ensure the L2 PLUS and your PC are on the same IP network segment. If connecting directly, you may need to manually change the L2 PLUS's IP address.

Steps to modify L2 PLUS's IP address:

  1. Push the MENU button and enter the IP setting menu.
  2. Turn OFF DHCP.
  3. Adjust the value of the IP address via the knob.

Steps to modify the IP address of the Ethernet port (Windows):

  1. Open the "Network and Sharing Center".
  2. Click on "Internet".
  3. Access to Properties (may require administrator privileges).
  4. Under "This connection uses the following items", find "Internet Protocol version 4 (TCP/IPv4)".
  5. Select "Use the following IP address" and change the IP address to the same network segment as L2 PLUS (e.g., if L2 PLUS is 192.168.0.99, set PC to 192.168.0.1-255). Ensure IP addresses do not conflict.
  6. Click "Subnet Mask"; the computer will automatically calculate the subnet mask.
  7. Click 'OK'.

6.1.2 Connect Wirelessly with Your Router

The L2 PLUS supports wireless control, requiring a wireless router. The computer receives the Wi-Fi signal from the router connected to the L2 PLUS.

Steps of wireless connection:

  1. Connect the L2 PLUS to the router's LAN port.
  2. Press the MENU button and enter the IP settings sub-menu.
  3. Turn on the DHCP switch.
  4. Connect your computer to the Wi-Fi from the router.
  5. Open Feelworld Live to search for the device.

Note: Android and iOS versions only connect wirelessly. Regardless of wired or wireless connection, ensure IP addresses are on the same network segment and do not conflict.

6.2 Using Feelworld Live Software

After installing the software, click the icon and then 'Search' to find L2 PLUS devices. All available L2 PLUS devices in the sub-net (up to 128) will be found. Select the desired device by SN and IP to enter the management interface. The software interface mimics the physical device's operation panel.

  • Input Info: Check input resolution.
  • HDMI: Set output (PVW/PGM) and format.
  • USB 3.0: Set output (PVW/PGM) and format.
  • Live Streaming: Choose 'FEELWORLD USB3.0 Capture'. H.265 can be enabled for streaming back on XPOSE software. OBS can be enabled for streaming. (H.265 and OBS cannot work simultaneously).
  • Audio: Configure main audio, mix audio, MIC/LINE type, and audio bar display.
  • Test Pattern: Provides a test signal output to troubleshoot USB or HDMI output interfaces. Select output (USB/HDMI), test pattern mode, and adjust color.
  • HDMI Out Setting: Configure HDMI/DVI output, bits (8/10/12 bit), and color space (Image/Video).
  • Password Protection: Set a password to prevent control conflicts when multiple devices are on the same LAN.
  • Lan Port Set: View and modify current IP, mask, and gateway. Turn off DHCP to change values.
  • Language: Select interface language (Chinese, English, Russian, German, Korean).
  • T-Bar Calibration: If the T-Bar is not in the correct position, calibrate it by turning on the calibration switch, pushing the T-Bar to top/bottom ends, and toggling the 'On' switch.
  • Reset: Removes all settings.
  • MIX: Select from 15 transition effects.
  • PIP: Select from 9 PIP layouts.
  • Chroma Key: Enable, select base color, and adjust parameters.
  • PTZ Camera Setting: Set communication port (e.g., VISCA or UDP port 1259) and control PTZ camera functions.
  • Logo Overlay: Select a picture for the logo, choose a transparent color, and enable 'Transparent Switch' to filter the color. The logo image format should be BMP 24 bits, and size within 256x128 pixels.

7. Maintenance

To ensure the longevity and optimal performance of your FEELWORLD L2 PLUS, follow these maintenance guidelines:

  • Cleaning: Do not use chemical solutions to clean the product. Wipe the switcher with a clean, soft cloth to maintain the brightness of the surface.
  • Cooling: The switcher has a built-in cooler with three adjustable fan speeds to prevent overheating. Ensure proper ventilation around the device.
  • Storage: Store the device in a clean, dry environment, free from extreme temperatures and humidity.
Image showing the built-in cooler fan on the bottom of the L2 PLUS.

Image: Built-in cooler fan for heat dissipation.

8. Troubleshooting

  • No Video Format YUY2 in OBS: Ensure the USB 3.0 port connection is correct (USB 3.0 cable to a blue USB 3.0 port on PC). If captured, change the video format to YUY2.
  • T-Bar Not Functioning: If the T-Bar is not in the correct position, no other operation is possible. Perform T-Bar calibration as described in section 6.2.
  • IP Conflict with Feelworld Live: Ensure the L2 PLUS and your computer are on the same IP network segment. Manually adjust IP addresses if necessary (refer to section 6.1.1).
  • Forgotten Password: If you have forgotten your password for Feelworld Live, restore the factory settings on the L2 PLUS.
  • Chroma Key Effect Not Visible: Ensure the layer you want to edit is on the top layer (B layer in PIP setting) for the chroma key effect to be visible.
  • H.265 and OBS Conflict: These two functions cannot work simultaneously. Choose either H.265 or OBS for streaming.
  • vMix Output Resolution Issues: vMix does not automatically recognize L2 PLUS output resolution changes. If the L2 PLUS output resolution is modified, the vMix picture will pause. Re-select 'FEELWORLD USB3.0 Capture' and manually input the current output resolution in vMix.

9. Specifications

FEELWORLD L2 PLUS Product Parameters
Category Item Parameter
Screen Type 5.5-inch (touch)
Connections HDMI In 4×HDMI
HDMI Out 1×HDMI
USB3.0 Out 1×USB TypeA
Audio In 1×3.5mm (MIC)
Audio Out 1×3.5mm (LINE)
Communication LAN 1×RJ45
Power DC Jack 1×DC Jack
Performance Input Resolutions (HDMI) SMPTE: 720p@50/60, 1080i@50/60, 1080p@23/24/30/50/60
VESA: 1024x768@60, 1280x720@60, 1280x768@60, 1280x1024@60, 1360x768@60, 1366x768@60, 1440x900@60, 1600x1200@60, 1680x1050@60, 1920x1080@60, 1920x1200@60
Output Resolutions (HDMI) SMPTE: 720p@50/60, 1080p@24/25/30/50/60
VESA: 1024x768@60, 1280x720@60, 1280x768@60, 1280x1024@60, 1360x768@60
Supported Standards (HDMI) 1.3
Supported Standards (USB) 3.0
Power Input Voltage DC 12V/2A
Max Power ≤ 21W
Environment Temperature -30°C ~ 50°C
Humidity 10% ~ 85%
Physical Weight 610g
Dimension 191(L) × 110(W) × 43(H)mm

Note: Product features and performance are subject to improvement without prior notice.

10. Warranty and Support

The product warranty for FEELWORLD L2 PLUS is one year from the date of purchase.

Warranty Policy:

  • We inspect goods quality before shipment. If unexpected problems occur, we aim to resolve them amicably.
  • For quality problems, provide photos, videos, or other evidence for evaluation.
  • Man-made damage is the buyer's responsibility.
  • For product quality issues, return the goods (buyer responsible for shipping costs). Upon receipt, a new product will be sent, with the seller covering resend shipping costs.
Warranty icon and text 'ONE year products warranty'. Processing time icon and text 'Most items will be shipped out within 72 working hours'. Best price icon and text 'Provide you high quality items with best price'. Shopping help icon and text 'All emails will be answered within 24 working hours'.

Image: Warranty and service information icons.

For further assistance, you may refer to the official user manual PDF: FEELWORLD L2 PLUS User Manual (PDF).

11. User Tips

No specific user tips were available from reviews or Q&A content for this product at this time. Always ensure all cables are securely connected before operation to prevent signal loss or instability.

12. Package Contents

The standard package for the FEELWORLD L2 PLUS includes:

  • 1 × L2 PLUS Switcher
  • 1 × 2A Adaptor
  • 1 × USB Cable
  • 1 × User Manual
Image showing the contents of the L2 PLUS package: Switcher, USB Cable, 2A Adapter, User manual.

Image: Package contents of the L2 PLUS.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.