1. Introduction
The CPVAN CP10 Pro LoRa is a 7-inch smart security panel designed as the central hub for your home alarm system. It features a 1024x600PX high-definition IPS screen, a built-in 5000mAh lithium battery, and a loud 120dB siren and buzzer. The system supports 8 wired sensor zones and connects all accessories to the Tuya/Smart Life app, allowing you to control and monitor your home from anywhere. This manual provides detailed instructions for setup, operation, maintenance, and troubleshooting.
2. Package Contents
Please check the package for the following items:
- 1 x CPVAN CP10 Pro LoRa Security Panel (Main Host)
- 1 x PIR Motion Detector
- 1 x Door/Window Sensor
- 2 x Remote Controls
- 1 x Power Adapter (EU Plug, UK Plug, or AU Plug depending on selection)
- 1 x User Manual (this document)

3. Product Overview
3.1 Security Panel (Main Host)
The security panel is the central unit of your alarm system. It features a 7-inch IPS touchscreen display for easy interaction.

Panel Components:
- Front View: 7" Touch Screen, Microphone, LED Indicator.
- Rear View: DC12V 1A Power Input, Type-C 5V 2A Power Input, Speaker, Anti-disassembly Switch, Siren, Battery Switch (ensure it's ON before use), Desktop Bracket, 8 Wired Zones (for custom NO/NC status), Nano SIM Card Slot.
3.2 Entry Sensor (Door/Window Sensor)
Detects the opening and closing of doors or windows. Consists of two parts: a transmitter and a magnet.

3.3 Motion Sensor (PIR Detector)
Detects movement within its detection area using passive infrared technology.
3.4 Remote Control
Used for arming, disarming, and triggering SOS alarms remotely.
4. Setup Instructions
4.1 Physical Installation of the Security Panel
The security panel can be wall-mounted or placed on a desktop.
4.1.1 Wall Mount
- Install the wall hanging plate on the wall using screws. Ensure the screws are securely nailed and the plate is level.
- Align the hole on the back of the panel with the hanging plate and slide it into place.
- For concealed wire installations, remove the bracket and cable clip if necessary.
4.1.2 Desktop Placement
The panel comes with a stand, allowing it to be placed directly on any flat surface. This offers flexibility in placement without needing to drill holes.
Important Placement Notes:
- Install the panel in the center of your home for optimal signal reception and transmission.
- Place the panel closer to your WiFi router for a stable connection.
- Avoid installing devices on metal surfaces or load-bearing walls, as this can interfere with wireless signals.
4.2 Powering On
Connect the security panel to the power supply using either the DC12V 1A or Type-C 5V 2A charging port. Ensure the backup battery switch on the back of the panel is in the "ON" position.
4.3 App Installation and Connection (Tuya/Smart Life)
The CPVAN CP10 Pro LoRa system integrates with the Tuya/Smart Life app for remote control and monitoring.
4.3.1 Download the App
- Turn on the security panel, select a language, and scan the QR code displayed on the panel to download the app.
- Alternatively, search for "Smart Life" in your device's app store (Apple App Store for iOS, Google Play Store for Android).
- After downloading, grant all necessary permissions to the app on your phone.
- Register or log in to your Smart Life account.
4.3.2 Connect Panel to Smart Life App
Note: The panel supports 2.4GHz WiFi networks only. Ensure your router is configured correctly and your phone is connected to a 2.4GHz WiFi network with Bluetooth enabled.
- On the security panel, navigate to the "Connection" menu, select "WiFi", and enter the default user code (1234).
- Press "Airlink" to enter WiFi pairing mode.
- Open the Smart Life app, tap the "+" icon in the top right corner, and select "Add Device". The app will discover the "Smart Security Panel".
- Tap "Add" next to the discovered device.
- Enter your 2.4GHz WiFi network name and password, then tap "Next".
- The app will connect to the panel. Once successfully paired, you can control the alarm system via the app.
4.4 Pairing Security Devices (Accessories)
After connecting the panel to the app, you can pair your sensors and remote controls.
4.4.1 Pairing Entry Sensor (Door/Window Sensor)
- On the security panel, go to "Connection" -> "Sensor" -> "Entry". Press "+" to add a new sensor.
- On the app, navigate to "Accessories" and select "Entry Sensor". Choose "Quick add device".
- Separate the two parts of the door sensor (transmitter and magnet) to trigger it for pairing.
- The panel and app will confirm successful pairing. You can then rename the sensor in the app.
4.4.2 Pairing Motion Sensor (PIR Detector)
- Ensure batteries are installed and the motion sensor is switched on.
- On the security panel, go to "Connection" -> "Sensor" -> "Motion". Press "+" to add a new sensor.
- On the app, navigate to "Accessories" and select "Motion Sensor". Choose "Quick add device".
- Wave your hand in front of the motion sensor to trigger it for pairing.
- The panel and app will confirm successful pairing. You can then rename the sensor in the app.
4.4.3 Pairing Remote Control
- On the security panel, go to "Connection" -> "Controller". Press "+" to add a new controller.
- On the app, navigate to "Accessories" and select "Controller". Choose "Quick add device".
- Press any button on the remote control to trigger it for pairing.
- The panel and app will confirm successful pairing. You can then rename the controller in the app.
5. Operating Instructions
5.1 Main Interface Overview
The main interface of the security panel displays the current time, date, system status (Armed/Disarmed), and quick access buttons for Away, Disarm, Home, SOS, Settings, and Status.
5.2 Arming and Disarming the System
The system can be armed or disarmed via the host panel, remote controls, or the Smart Life app.
5.2.1 Arm Modes
- Away: The system is fully monitored. All sensors will trigger an alarm if activated.
- Home: Partial monitoring. Some sensors (e.g., perimeter sensors) are active, while internal sensors might be inactive to allow movement within the home.
- Disarm: The system is not monitoring. Only SOS buttons or sensors set to "Always" mode will trigger an alarm.
5.2.2 Methods to Arm/Disarm
- Host Panel: Tap "Away", "Home", or "Disarm" on the touchscreen. Disarming may require a password.
- Remote Control: Use the dedicated buttons on the remote for Away, Home, Disarm, and SOS.
- Smart Life App: Use the "Away", "Home", or "Disarm" buttons within the app interface.
5.3 Setting Alarm Phone Numbers
The system can notify up to 5 phone numbers via SMS and calls when an alarm is triggered.
- On the security panel, navigate to "Phone" -> "Phone setup".
- Enter up to 5 alarm phone numbers.
- When an alarm is triggered, the system will send SMS messages to these numbers in order, then call them one by one until an answer is received.
5.4 Voice Control (Alexa & Google Assistant)
The system is compatible with Amazon Alexa and Google Assistant, allowing you to arm and disarm using voice commands.
- Ensure your security panel is connected to the Smart Life app.
- In the Smart Life app, link your account with Amazon Alexa or Google Assistant.
- Follow the instructions in the Alexa or Google Home app to discover devices and set up voice commands.
- A PIN code may be required for disarming via voice, which is set within the Alexa/Google app.
5.5 System Settings
Access system settings from the main interface by tapping the gear icon.
- Time: Set date and time display format.
- Audio: Adjust volume, turn on/off key beep and voice tone.
- Display: Set screen time-out and brightness.
- Language: Select from English, German, Russian, Spanish, Italian, Polish, French, Portuguese, Dutch, and Chinese.
- Security: Configure alarm delay, user codes (default: 1234), system codes (default: 9876), obfuscated codes, and password validity period. Also, set local alarm sound, external siren alarm, siren beep, and delay beep.
- Recover: Restart or reset the device.
- Clean: Temporarily black out the screen for cleaning.
- About: View device information (Model, Version, IMEI).
5.6 SMS Commands
The panel can be controlled via SMS commands from the phone number(s) set in the panel (Firmware version 1.0.20 or above).
| SMS Command | Action Taken by Panel | Replied SMS |
|---|---|---|
| away arm | Panel enters "Away" mode | System armed! |
| stay arm | Panel enters "Home" mode | System armed! |
| disarm | Panel enters "Disarm" mode | System disarmed! |
Note: The panel only accepts SMS commands from the phone number(s) set in the panel. Commands from other numbers will be ignored.
6. Maintenance
6.1 Battery Replacement
Regularly check and replace batteries in wireless accessories to ensure continuous protection.
- Entry Sensor: Uses CR2032x1 (Door Sensor A) or CR2450x2 (Door Sensor B). Slide the back cover off to access the battery compartment.
- Motion Sensor: Uses 1.5V AA battery x 3. Open the cover to replace.
- Remote Control: Uses 3V CR2032. Use a triangular pick to open the case.
- Multifunction Button: Uses 23A 12V Alkaline battery. Open the cover by prying it open from the bottom.
6.2 Screen Cleaning
To clean the touchscreen, navigate to "Settings" and select "Clean". The screen will temporarily black out for 1 minute, allowing you to wipe it without accidental inputs. Use a soft, dry cloth.
7. Troubleshooting
Refer to the table below for common issues and their solutions:
| Failure | The Reason | The Solution |
|---|---|---|
| Remote control malfunction | 1. Low battery 2. Metal sheet in battery compartment is poor contact/corroded 3. Code not paired 4. Wireless parameters mismatch | 1. Replace battery 2. Remove rust/dirt 3. Re-pair 4. Purchase compatible accessories |
| Door sensor failure | 1. Low battery 2. Metal sheet in battery compartment is poor contact/corroded 3. Code not paired 4. Wireless parameters mismatch 5. Sensor/magnet too far apart | 1. Replace battery 2. Remove rust/dirt 3. Re-pair 4. Purchase compatible accessories 5. Install sensor/magnet closer |
| Motion Detector failure | 1. Low battery 2. Metal sheet in battery compartment is poor contact/corroded 3. Code not paired 4. Wireless parameters mismatch 5. Incorrect angle | 1. Replace battery 2. Remove rust/dirt 3. Re-pair 4. Purchase compatible accessories 5. Adjust installation angle |
| Security panel does not alarm | 1. Panel not armed 2. Improper installation/accessories too far 3. Accessory code mismatch | 1. Arm the panel 2. Adjust position 3. Re-pair |
| Signal distance becomes shorter | 1. Main power disconnected/backup power insufficient 2. Interference from similar products 3. Panel receiving module faulty | 1. Check power supply 2. Check source of interference 3. Contact customer service |
| No emergency call made | 1. Panel not armed 2. No emergency phone number set 3. Improper installation/accessories too far 4. Encoding does not match | 1. Arm the panel 2. Re-set according to instructions 3. Adjust position 4. Re-pair |
| WiFi network configuration failed | 1. 2.4GHz WiFi not connected 2. Router not compatible 3. Damaged WiFi module | 1. Connect to 2.4GHz WiFi 2. Adopt panel WiFi hotspot mode 3. Contact customer service |
| Entry opened warning is invalid | 1. Door sensor pairing error 2. Door sensor switch code mismatch 3. Wrong alarm type set | 1. Door opening code needs pairing 2. Accessories are non-certified 3. Set alarm type as main door/window alarm |
8. Specifications
| Feature | Specification |
|---|---|
| Model Number | CP10 Pro LoRa |
| Display | 7 inch 1024x600px HD IPS Full-Color Screen |
| Input Power | DC12V 1A external cable or DC5V 2A Type-C USB |
| Built-in Battery | 3.7V 5000mAh lithium battery |
| Working Power Consumption | <5W |
| Working Temperature | -10°C ~ +50°C |
| Relative Humidity | <95% (no condensation) |
| Wireless Parameters | LoRa + 433MHz, eV1527 |
| Wireless Distance | 500m (LoRa accessories), 60m (433MHz accessories) |
| Wired Zones | 8 |
| Mobile System | 4G |
| WiFi Standard | IEEE802.11b/g/n 2.4G band |
| Smart Home Platform | Tuya, Smart Life APP |
| Siren Volume | Built-in Louder siren 115db |
| Product Size | 183mm x 135mm x 18mm |
| Certification | CE, RoHS |

9. User Tips
Based on common user experiences and questions:
- For optimal wireless performance, ensure the main panel is centrally located and not obstructed by large metal objects.
- When pairing accessories, make sure they are close to the main panel for a successful connection.
- Regularly test your sensors and alarm functions to ensure the system is working correctly.
- Keep your app updated to the latest version for new features and security enhancements.
- If experiencing connectivity issues, try restarting your WiFi router and the alarm panel.
10. Warranty and Support
10.1 Warranty Rules
- The product is guaranteed for one year from the date of sale. Warranty service is valid only under normal use.
- Damage caused by environmental conditions not meeting product requirements is not covered.
- Product damage due to man-made causes or force majeure is not covered.
- For any failure caused by the product itself during the warranty period, please contact customer service.
10.2 Hazardous Substance Declaration
This product complies with regulations regarding hazardous substances. The table below indicates the presence of certain substances:
| Component Name | Lead (Pb) | Mercury (Hg) | Cadmium (Cd) | Hexavalent chromium (Cr(VI)) | Polybrominated biphenyls (PBB) | Polybrominated diphenyl ethers (PBDE) |
|---|---|---|---|---|---|---|
| Metal parts | 0 | 0 | 0 | 0 | 0 | 0 |
| Plastic parts | 0 | 0 | 0 | 0 | 0 | 0 |
11. FCC Declaration
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Warning: changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.