ANYFAR RM-LX2522F

Contents

ANYFAR Wireless Carplay Android Auto Module User Manual

Model: RM-LX2522F

1. Introduction

Thank you for choosing this Intelligent Car Information System. Our product adds CarPlay and Android Auto to vehicles lacking these features, letting you use them for music, navigation, and more—all via your car's original screen. This seamless upgrade bridges your smartphone and in-car display, bringing familiar interfaces without altering your vehicle's factory setup. Easy to integrate, it enhances connectivity safely, turning your existing infotainment system into a smart, intuitive hub. Modernize your drive affordably, leveraging what your car already has.

The Land Rover & Jaguar decoder box is a retrofit CarPlay and Android Auto Kit that adds CarPlay and Android Auto functionality to a standard vehicle. The kit gives an “OEM” feel and appearance as it retains the existing Land Rover display on your dash as well as the controls (rotary controller and steering wheel controls).

2. Safety Precautions

  • Install only by qualified professionals to avoid damaging vehicle electrical systems.
  • Disconnect car battery before installation to prevent short circuits.
  • Ensure all connections are secure and insulated to avoid fire hazards.
  • Do not block airbags, driver visibility, or vehicle controls during installation.
  • Avoid modifying essential vehicle safety systems or wiring.
  • Operate connected devices only when parked; never distract from driving.
  • Regularly check for loose connections or overheating during use.
  • Stop using immediately if unusual smells, sounds, or malfunctions occur.
  • Ensure product usage complies with local traffic laws and regulations.
  • Keep product away from water, extreme temperatures, and direct sunlight when not in use.

3. Function Introduction

3.1. Apple CarPlay

CarPlay lets iPhone users connect to car systems, mirroring key apps. Access navigation, music, calls, and messages via the car's screen or voice commands. It enables hands-free operation, syncing contacts and playlists, enhancing driving safety and convenience seamlessly. Supports both wired and wireless connections.

Wireless CarPlay interface on car screen

Figure 1: Wireless CarPlay interface displayed on a car's infotainment screen.

3.2. Android Auto

Android Auto connects Android phones to car displays, bringing essential apps safely. Access navigation, music, calls, and messages via voice or touch. It prioritizes driving-focused features, enabling hands-free use to keep focus on the road, enhancing convenience and safety. Supports both wired and wireless connections.

Wireless Android Auto interface on car screen

Figure 2: Wireless Android Auto interface displayed on a car's infotainment screen.

3.3. Front/Rear/360 Input

The intelligent module supports video decoding and can be equipped with front view, rear view (with intelligent dynamic trajectory display and radar support), as well as a 360° panoramic view. It also features 2 RCA inputs for adding rear and right PAL/NTSC cameras.

Optional aftermarket rear view camera display

Figure 3: Display of an optional aftermarket rear view camera integrated with the system.

4. Compatibility

This CarPlay Video Interface is specifically designed for Land Rover and Jaguar vehicles with Bosch head units. Please verify your car's head unit type and model year for compatibility.

4.1. Compatible Model List

Table of compatible Land Rover and Jaguar models, years, and screen sizes

Figure 4: Compatible Land Rover and Jaguar models with corresponding years and screen sizes.

4.2. Head Unit Identification

It is crucial to identify your car's head unit type (Bosch or Harman) and its time display style to ensure compatibility. The time display location can help distinguish between different head unit systems.

Bosch head unit time display example

Figure 5: Example of a Bosch head unit, where the time is typically displayed on the right side of the screen.

Detailed compatibility table for Bosch and Harman systems

Figure 6: Detailed compatibility table comparing Bosch and Harman systems, including year ranges and screen sizes. Note: If your OEM radio has no NAV button, it might not be compatible.

To determine if your vehicle can install this CarPlay interface, if you are unsure, please contact customer support by taking photos of your car’s center console.

5. Setup and Installation

5.1. Package Contents

Before beginning installation, ensure all components are present:

Package contents including main unit, adapter cables, power cable, RCA/USB cable, screen signal cable

Figure 7: The package includes the main unit (124x80x27mm), adapter cable, screen signal cable, power cable, and RCA/USB cable.

5.2. Wiring Diagram

Follow the wiring diagram carefully for proper installation. The product comes with three CAN-bus adapter harnesses. Choose the one that matches your vehicle model—preferably the connector behind the center-console A/C control panel. If the first two harnesses don't fit, use the main-unit connector located under the front passenger seat instead.

Wiring diagram for the CarPlay Android Auto module

Figure 8: Wiring diagram showing connections for LVDS harness, power harnesses, and the main unit.

5.3. DIP Settings & Switch

DIP switch settings are crucial for correct functionality. Since screen configuration cannot be obtained directly from the original system, all DIP options are provided. Please try them one by one in order. After switching the DIP, be sure to restart the decoder for the changes to take effect.

DIP settings table for various car models and screen sizes

Figure 9: Example DIP settings for various car models and screen sizes. The dial is considered 'ON' when down.

5.4. Wireless Connection Steps

The latest technology uses a wireless CarPlay and Android Auto solution that supports audio and video separation. Before using the wireless connection, please pair your device via Bluetooth and ensure the vehicle's audio system is set to Bluetooth music mode for optimal connection and audio performance.

Bluetooth audio output connection steps

Figure 10: Steps for Bluetooth audio output: 1. Pair Car Bluetooth, 2. Connect CarPlay, 3. Sound Output selection.

5.4.1. Wireless CarPlay Connection

  1. Turn on your phone's Bluetooth and Wi-Fi, and keep them on.
  2. Go to the Bluetooth settings of the Smart Box.
  3. Select the Bluetooth Device name as "CAR Audio_XXXX" and pair.
  4. Confirm the pairing request window that pops up on your phone.
Wireless CarPlay connection process screenshots

Figure 11: Screenshots illustrating the wireless CarPlay connection process, including Bluetooth pairing and CarPlay activation prompts.

5.4.2. Wireless Android Auto Connection

  1. Turn on your phone's Bluetooth and Wi-Fi, and keep them on.
  2. Go to the Bluetooth settings of the Smart Box.
  3. Select the Bluetooth Device name as "CAR Audio_XXXX" and pair.
  4. After successful Bluetooth pairing, follow the on-screen Android Auto connection process.
Wireless Android Auto connection prompt

Figure 12: Android Auto prompt to connect via Bluetooth or insert USB cable.

5.4.3. Audio Source Selection

After connecting, check your iPhone to ensure the sound source is set to the original car radio for optimal audio output.

iPhone audio source selection screen

Figure 13: iPhone screen showing audio source selection, with 'Land Rover' selected for car audio output.

6. Operating Instructions

The system is designed to retain original car functions and controls for a seamless user experience.

Original car functions retained: Steering Wheel Buttons, Central Control Panel, Touch Screen

Figure 14: Illustration of how original car controls like steering wheel buttons, central control panel, and touch screen are used with the new system.

6.1. Steering Wheel Button Control

Button Operation Function
Call icon Short press Answer the phone
End Call icon Short press Hang up the phone
Next Track icon (>>) Short press Next song
Previous Track icon (<<) Short press Previous song
Volume Up (+) Short press Increase the volume
Volume Down (-) Short press Decrease the volume

6.2. Central Control Panel & Touch Screen

Button Operation Function
Power button Double Click Switch between OEM screen and interface screen
Hazard light button Double Click Switch between OEMM screen and interface screen
Touch screen Touch Control function

6.3. Intelligent Voice Control

The system supports intelligent voice control for safer driving and hands-free operation. Utilize voice assistants like Siri (for CarPlay) and Google Assistant (for Android Auto) for commands such as navigation, music playback, and calls.

Intelligent voice control interfaces for Siri and Google Assistant

Figure 15: Comparison of voice control interfaces for Siri (Apple CarPlay) and Google Assistant (Android Auto).

6.4. Online Navigation

Use your favorite navigation app (e.g., Google Maps, Waze, Apple Maps) directly on your car's screen. All available with live traffic information.

Online navigation display on car screen

Figure 16: Online navigation app displayed on the car's screen.

7. Maintenance

To ensure the longevity and optimal performance of your Wireless Carplay Android Auto module, follow these general maintenance guidelines:

  • Cleaning: Use a soft, dry cloth to clean the module and surrounding areas. Avoid harsh chemicals or abrasive materials.
  • Connection Check: Periodically check all wiring connections to ensure they are secure and free from corrosion. Loose connections can lead to intermittent functionality.
  • Software Updates: Check the manufacturer's website or contact support for any available software updates. Keeping the firmware updated can improve performance and add new features.
  • Environmental Protection: Keep the module away from extreme temperatures, direct sunlight, and moisture. Ensure proper ventilation around the unit to prevent overheating.

8. Troubleshooting

8.1. Why does the Box's Bluetooth disconnect?

The wireless CarPlay/Android Auto system uses Bluetooth for initial pairing and then establishes a Wi-Fi connection to transmit data. To avoid interference, the Bluetooth connection will disconnect once the Wi-Fi connection is stable. This is normal operation.

8.2. I cannot connect CarPlay/Android Auto, but Bluetooth is already paired.

If you are experiencing issues connecting, please try the following:

  • Forget the device's Bluetooth connection on your phone.
  • Reset Wi-Fi settings on your iPhone (Settings > General > Transfer or Reset [Device] > Reset > Reset Network Settings).

8.3. Why is the wireless CarPlay/Android Auto connection not stable?

  1. Ensure that the mounted position of the CarPlay box is not blocked by metal components, as this may impair Wi-Fi signal transmission.
  2. Switch the Wi-Fi channel: Enter the CarPlay box's settings (Factory Mode > Connectivity Settings > Hotspot Band) and select channel 1, 6, or 11, depending on the current region, to find the most stable connection.

8.4. Radar and Trajectory Settings

If your aftermarket camera supports reversing trajectory lines or radar, you may need to adjust settings:

  1. Enter the system settings: Click "Factory mode - Advanced mode" and enter the password "888888".
  2. In MCU Setup, uncheck the "A0" option.
  3. Return to the previous level and click "Restart system" to enable the reversing rear view function.
  4. If the aftermarket camera supports reversing trajectory lines, uncheck the A1 box to display them.
  5. For aftermarket radar, uncheck the A2 box to use it.
  6. To connect a front camera, choose the "A3" option.
MCU Setup screen for radar and trajectory settings

Figure 17: MCU Setup screen showing options for radar and trajectory line display.

9. Specifications

Parameter Value Parameter Value
Operating voltage 9-16V, 14.4V (rated) Storage temperature -30 ~ +85°C
Operating temperature -30 ~ +75°C Ambient humidity <98% (at 45°C), 65±5% (rated)
Power consumption current 1A (rated), 3A (Max) Shutdown current 300mA (Clock is on)
Quiescent current less than 3mA
Charging current <2A; when the USB charging current >1A, the host machine should activate the circuit protect function to control the current within 15A and avoid product burning.

10. User Tips

  • Verify Compatibility: Always double-check your car's model, year, and head unit type (Bosch/Harman) against the compatibility tables before installation to avoid issues.
  • Bluetooth Audio: The unit connects to your car's original sound system via Bluetooth for audio output, ensuring clear sound.
  • Professional Installation: For best results and to prevent damage, consider professional installation.

11. Warranty and Support

If you have any technical issues or require further assistance, please contact our technical support team.

Email: techsupport@anyfar.com

For more information, visit our website: www.anyfar.com

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.