MAXPG S11 Smart Projector User Manual

1. Introduction

This manual provides detailed instructions for the safe and efficient operation of your MAXPG S11 Smart Projector. Please read this manual thoroughly before use and retain it for future reference.

The MAXPG S11 is a high-performance smart projector designed for home movie theater, TV, and gaming. It features 2500 ANSI Lumens, native 1080P Full HD resolution with 8K video support, Google Play, HDR10+, Android 11, a built-in DVB-T2 digital TV tuner, dual custom speakers, 2-second auto-focus, auto keystone correction, and versatile connectivity options.

2. Product Considerations and Safety Guidelines

Please read this manual carefully before you use this machine.

Installation

• For the best results, please use the machine in a dark room or close the curtains.
• Carefully handle this machine. Falling or impact may damage the parts or cause image blur and abnormal display.

Power Supply

• Please shut down the product after working for 4 hours, and disconnect the power supply for 30 minutes.
• Use the power cord carefully to avoid excessive bending; a damaged power cord may cause electric shock and misfire.
• To ensure the stability of the machine power supply, please use a power supply line meeting national power standards and a power socket with grounding protection measures.
• After use, unplug the power cord from the power socket.

Remote Control Battery

• Using the wrong model battery replacement will have an explosion risk. Be sure to dispose of used batteries according to instructions.
• The battery shall not be exposed to temperatures such as sunlight, fire roasting, or similar overheating.

Waterproof Notice

• This product does not have a waterproof function. Avoid water or water splashing. Do not place the product beside vases, cups, or other items with liquid.
• To prevent electric shock, do not allow rain or water to inject into the machine.

Cleaning

• Unplug the power cord first.
• Clean the casing regularly with a wet cloth. You may use neutral detergent; do not use strong detergent or solvents (such as alcohol or thinner).
• The lens should be cleaned with eyeglass cloth or lens paper. Be careful not to scratch the lens.
• Please use a soft brush to clean the vents and speakers of the machine regularly. Otherwise, the vent will be blocked by dust and cause overheating, potentially leading to machine failure.

High Temperature Attention

• During or after projection, the area near the exhaust vent will become hot. Touching it with your hand at this time may lead to burns.
• When the machine is projecting, to protect your eyes, please keep a proper distance to watch. Do not face the lens directly, as it may harm your eyes.

General Reminders

• Do not open the machine; otherwise, the company will not undertake free quality warranty service.
• Do not place any liquid or heavy objects on this machine.
• Do not place the projector on items that may cause ventilation blockage, such as cloth, blankets, etc.
• To avoid possible harm to children, place the product in inaccessible areas.
• If this product is found to be damaged, do not try to repair it yourself. Please contact the dealer.
• When transporting this product, please use the original foam packaging.
• Please use it at 5-35 degrees Celsius and in environments below 2000M altitude.

3. Packaging Content

This product contains the following components. If there is any omission, please contact the dealer immediately.

• Projector: 1 unit
• Remote control: 1 unit
• 19VDC power adapter: 1 unit
• User manual: 1 unit

4. Product Overview

Familiarize yourself with the different parts of your projector.

Projector Views and Components

1. Shot (Projection Lens)
2. Camera (Automatic entry, automatic obstacle avoidance)
3. TOF sensor (Autofocus)
4. Infrared head
5. USB1 Port
6. USB2 Port
7. HDMI Port
8. AUX Port
9. AV Port
10. Power supply input
11. Direction button (Left)
12. Direction button (Upward)
13. Confirm button
14. Direction button (Right)
15. Direction button (Downward)
16. Return button
17. Enter button
18. Menu button
19. On/Off button

5. Setup Guide

5.1. Starting Up

If the adapter is used directly, the red light will be on. Press the power button to turn it green, and the machine will start to work.

5.2. Image Focusing

The projector features automatic image focusing. If the projection picture is not clear, you can also press the remote control to adjust the focal length until the picture is clear. To close or open the autofocus function, navigate to the 'Auto & Other' settings interface and toggle the 'Auto focus' option.

5.3. Projector Signal Source Input Selection

When external equipment is connected (e.g., via HDMI or USB), use the remote control to navigate to the corresponding signal channel icon on the main interface. Press the confirmation key to enter the channel. To exit, press the return button to go back to the main interface.

5.4. Connecting Devices

Connect to HDMI / AV Device

Prepare an HDMI / AV cable. Connect one end to the projector's HDMI / AV interface and the other end to your device (e.g., computer, HD player, DVD). Select the corresponding HDMI channel on the projector.

Connect U Disk

After connecting a U disk to the projector, move the icon on the main interface to the USB option. Upon entering, you can open video, audio, text, pictures, and other files.

5.5. Screen Casting Function

Open the Android / Apple screen casting app on the main interface. Then, open the screen casting function on your phone to search for the projector's name and connect to it.

5.6. Local Playback

After connecting a U disk to the projector, use the remote control to open the local player. Select the local disk, then select the U disk to open (video, pictures, songs, etc.). Select the file to be opened and press the confirmation button to start playback. Press the return button to exit.

The local player supports the following formats:

5.7. Installation Mode

Depending on your environment and needs, you can use a dedicated stand to hold it forward, or hang it from the ceiling and project it backwards onto the screen.

5.8. Projection Size and Distance Table

Refer to the table below for recommended projection sizes and corresponding distances from the lens to the screen.

6. Operating Instructions

6.1. Android Interface Overview

Press the power button to boot the projector. The boot video will appear, and after a few seconds, you will enter the main Android interface.

Video 6.1: Product demonstration showing UI, projection quality, autofocus, and screen casting.

6.2. Remote Control Functions

The remote control allows you to navigate the projector's interface and control various functions.

1. On/Off key
2. HDMI Source selection
3. Settings key
4. Upward navigation
5. Confirm/Pause Key
6. Leftward navigation
7. Rightward navigation
8. Downward navigation
9. Menu key
10. Return key
11. Game keys
12. Volume+
13. Zoom up key
14. Mute
15. Volume-
16. Zoom down key

6.3. Android Settings

From the main interface, use the remote control's direction keys to navigate to the system settings icon. Press the confirmation key to enter the settings menu.

6.3.1. Wireless Network

Select 'Wireless Network' to set up your Wi-Fi connection. Choose your desired Wi-Fi network, press OK, enter the password, and connect. Press the return key to exit the interface.

6.3.2. Lifting Mode

Select 'Lifting mode' to choose between 'Forward casting' or 'Backward casting' projection. Press OK to confirm and the return button to exit.

6.3.3. Picture Quality

Select 'Picture Quality' to adjust settings like Brightness, Contrast, Saturation, and Sharpness. Use the direction keys to select items and adjust values. Press the return key to exit adjustments and then again to exit the screen settings interface.

6.3.4. Keystone Correction

Select 'Keystone correction'. Use the direction keys to switch between the four corners of the projection. Press the confirmation key to set, and use the left/right keys to adjust the value. After adjusting one corner, press the return button to switch to the next. Repeat until the screen is normal, then press the return key to exit.

6.3.5. Time

Select 'Time' to adjust time settings, including 'Mode' (e.g., Automatic Update), 'Time zone', 'Time', and 'Date'. Use direction keys to select and adjust. Press the return key to exit.

6.3.6. Language

Select 'Language' to choose your preferred language (e.g., 简体中文, English, Español, Русский язык). Press the confirmation key to confirm. Press the return key to exit.

6.3.7. Application Management

Select 'Application management' to view installed applications. You can clean the cache, clear data, or uninstall applications. After performing an action, press the return key to exit.

6.3.8. System Information

Select 'System information' to view details such as product name, system version, and software version. You can also update the system from this interface. Press the return key to exit.

6.3.9. Auto & Other

Select 'Auto & Other' to toggle functions like 'Auto focus'. Press the confirmation key to close or open functions. Press the return key to exit this interface.

6.4. OSD Menu Setting

After the projector is connected to a device (HDMI / AV / USB) or when playing online video, press the menu key on the remote control to call up the OSD (On-Screen Display) menu to adjust image and sound settings.

1. Press the menu button to enter the OSD menu.
2. Use the upper and lower keys to select the items to be adjusted.
3. Press the confirmation key to enter.
4. Use the up/down, left/right keys to set the parameters.
5. Press the return key to save the parameters.

6.5. Mobile Phone Remote Control

Click the remote control icon on your phone's main interface and scan the QR code displayed on the projector screen with your phone (limited to Android phones) to establish a connection.

7. Maintenance

Regular maintenance ensures the longevity and optimal performance of your projector. Refer to the 'Cleaning' subsection under 'Product Considerations and Safety Guidelines' for detailed cleaning instructions.

8. Troubleshooting

If you encounter issues, please review the following common points before contacting support.

• Image Blur/Abnormal Display: Ensure the projector is stable and has not suffered impact. Use the image focusing feature to adjust clarity.
• Overheating: Ensure vents and speakers are clean and unobstructed. Disconnect power after 4 hours of continuous use for a 30-minute cool-down period.
• No Power: Check power cord connection and ensure it's plugged into a grounded socket.
• No Signal: Verify external devices are correctly connected via HDMI/AV/USB and the correct input source is selected on the projector.
• Unclear Projection: Adjust image focus and keystone correction settings.

For complex issues, do not attempt to repair the device yourself. Contact the dealer for assistance.

9. Specifications

Detailed technical specifications for the MAXPG S11 Smart Projector.

10. User Tips

• Optimize Picture Quality: While the projector offers good picture quality out of the box, experiment with the 'Picture Quality' settings (Brightness, Contrast, Saturation, Sharpness) to fine-tune the image to your viewing environment and personal preference.
• Easy Operation: The Android interface is designed for ease of use. Take advantage of the remote control's dedicated buttons for quick access to settings and navigation.
• Brightness Modes: Utilize the different brightness modes (High Bright, Balanced, Eco) to adapt the projection to various lighting conditions, ensuring a clear picture whether it's daytime or night.
• Smooth Streaming: For the best streaming experience, ensure your projector is connected to a stable 5G Wi-Fi network, especially when streaming high-resolution content.

11. Warranty and Support

Do not open the machine; otherwise, the company will not undertake free quality warranty service. If this product is found to be damaged, please do not try to repair it yourself. Please contact the dealer for assistance and warranty information.

This product will be continuously optimized, and there may be differences between the OSD operation interface and the manual pictures. These changes do not affect the normal implementation of the functions described in this manual. We apologize for any inconvenience caused by changes to the interface and some functions without prior notice.