ALLTRUE Mini Dimmer LED Single Color Controller

Contents

ALLTRUE Mini Dimmer LED Strip RGB Controller User Manual

Model: Mini Dimmer LED Single Color Controller

1. Introduction

This manual provides essential information for the safe and effective use of your ALLTRUE Mini Dimmer LED Strip RGB Controller. This compact controller is designed to manage the lighting effects of 12V or 24V LED strips, offering dynamic modes, speed adjustments, and brightness control. Please read these instructions carefully before installation and operation.

2. Safety Information

  • WARNING: Keep out of reach of children.
  • In case of ingestion, seek medical attention immediately.
  • ATTENTION: Avoid using in humid environments.
  • Do not leave the device powered on for extended periods without supervision.

3. Package Contents

  • 1 x Mini Dimmer LED Controller

4. Specifications

Attribute Value
Item Type RGB controller
Brand Name ALLTRUE
Input Voltage DC 12V / 24V
Output 1 Channel
Max Output Power 144W (at 12V2A)
Wattage 72W
Power Source DC
Material Plastic
Controller Dimensions Approx. 42 x 12 x 3mm
Total Length (with wires) 22cm
Color White
Working Temperature -25°C to 65°C
Applicable Lights LED strip 3528/5050 RGB
Connection Mode Controller
Controlled Method Controller buttons
Warranty 1 year

5. Setup and Installation

Follow these steps to install your Mini Dimmer LED Strip RGB Controller:

  1. Inspect Wiring: Before making any connections, carefully inspect all wiring for integrity and ensure there are no damages.
  2. Connect LED Strip: Connect the output wires of the controller to your LED strip. Ensure correct polarity: the red wire from the controller connects to the positive (+) terminal of the LED strip, and the black wire connects to the negative (-) terminal.
  3. Connect Power Supply: Connect the input wires of the controller to your DC 12V or 24V power supply. Again, ensure correct polarity: red to positive (+), black to negative (-).
  4. Secure Connections: Ensure all connections are secure and properly insulated if necessary.
  5. Power On: Once all connections are made, turn on the power switch for your LED lighting system.
  6. Positioning: Position the controller and LED strip as desired for your lighting decoration.
Bare wire ends for connecting the LED controller
Figure 1: Bare wire ends for connecting the LED controller to power and LED strip.
Mini Dimmer LED controller with extended wires
Figure 2: The compact Mini Dimmer LED controller with its input and output wires.

6. Operating Instructions

The Mini Dimmer LED Controller features three buttons for easy operation:

Close-up of Mini Dimmer LED controller buttons: MODE, SPEED BRIGHT, COLOR
Figure 3: Close-up view of the controller buttons.
  • MODE Button: Press this button to cycle through 5 different dynamic lighting modes.
  • SPEED/BRIGHT Button:
    • When in a dynamic mode, press to adjust the speed of the effect (6 levels available).
    • When in a static color mode, press to adjust the brightness (8 levels available).
  • COLOR Button: Press this button to select different static colors or to turn the LED strip on/off.

The controller also features an automatic memory function, which means it will remember the last setting (mode, speed, or brightness) even after being powered off.

7. Maintenance

To ensure the longevity and optimal performance of your LED controller:

  • Keep the controller clean and free from dust. Use a soft, dry cloth for cleaning.
  • Avoid exposing the controller to extreme temperatures or direct sunlight.
  • Ensure proper ventilation around the controller to prevent overheating.
  • Do not attempt to open or modify the controller, as this will void the warranty.

8. Troubleshooting

If you encounter issues with your LED controller, refer to the following common problems and solutions:

  • Light does not illuminate:
    • Check the power supply to ensure it is connected and functioning correctly.
    • Verify all plug connections between the power supply, controller, and LED strip are secure.
  • Light flickers:
    • Inspect the wiring for any loose connections or damage.
    • Ensure the power supply is adequate for the length and type of LED strip being used.

9. User Tips

No specific user tips were available from provided customer reviews or Q&A content for this product.

10. Warranty and Support

This product comes with a 1-year warranty from the date of purchase, covering manufacturing defects. For warranty claims or technical support, please contact the seller.

For additional item guides and documents, you may refer to the official user manual PDF available at this link.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.