1. Product Overview
This Wireless Carplay Android Auto Box is designed to integrate smartphone functionalities like navigation, music, and calls into your compatible Toyota vehicle's infotainment system. It supports both Apple CarPlay and Android Auto, offering a seamless and intuitive driving experience.
Key Features:
- Wireless Apple CarPlay
- Wireless Android Auto
- Airplay / Screen Mirroring
- USB Music Playback
- Advanced Chip for stable performance
- Rear Camera input support
- Bluetooth Calling
Product Components:

The main host unit has dimensions of 184mm x 84mm x 25mm.
2. Compatible Models
This product is compatible with the following Toyota cars (System: Touch 2 / Entune 2.0) that are WITHOUT a 360 camera/bird's eye view system. It must be a Panasonic/Fujitsu/Pioneer head unit.
| Model | Years | Notes |
|---|---|---|
| Toyota Corolla | 2014-2019 | Not compatible with 86140-02540 Fujitsu with 7" display |
| Toyota 4Runner | 2014-2019 | Only fits Panasonic & Fujitsu, Pioneer is not supported |
| Toyota Prius | 2016-2019 | Not compatible with Prius w/ 11.6" screen equipped models |
| Toyota RAV4 | 2014-2018 | Not compatible with 86100-42241 |
| Toyota Highlander | 2014-2019 | |
| Toyota Prius c | 2016-2019 | |
| Toyota Prius v | 2016-2017 | |
| Toyota Sienna | 2015-2017 | |
| Toyota Tacoma | 2014-2019 | |
| Toyota Yaris | 2014-2018 | |
| Toyota CH-R | 2016-2019 | |
| Toyota Alphard | 2015-2017 | |
| Toyota Avensis | 2014-2019 | |
| Toyota Avalon | 2015-2018 | |
| Toyota Sequoia | 2014-2019 | |
| Toyota Tundra | 2014-2019 | |
| Toyota 86 | 2017-2019 | |
| Toyota Verso | 2014-2019 | |
| Toyota Land Cruiser | 2014-2019 | |
| Toyota Camry | 2014-2017 | |
| Toyota Auris | 2014-2019 | |
| Toyota Fortuner | 2015-2019 | |
| Toyota Hilux | 2015-2019 |
Note: Please confirm your original car system and part number before purchasing.
3. Setup Instructions
3.1. Installation Video Guide
For a visual guide on installation, please refer to the official video:
3.2. Connection Diagram

- Connect with Original Car's Main Unit - 24PIN
- Connect with Original Car's Main Unit - 10PIN
- Connect with Original Car's Main Unit - 28PIN
- Connect with Original Car's Plug - 28PIN
- Connect with Original Car's Plug - 10PIN
- Connect with Original Car's Plug - 24PIN
- Forward Looking Input
- Camera Power Supply
- GND (Ground)
- USB Cable
- WiFi Antenna
3.3. DIP Settings
Adjust the DIP switches on the device according to your car's radio host type:

| Model | DIP Switch (1-8) | |||||||
|---|---|---|---|---|---|---|---|---|
| Fujitsu Panasonic | OFF | OFF | OFF | OFF | OFF | OFF | OFF | OFF |
| Pioneer | OFF | OFF | OFF | OFF | ON | OFF | OFF | OFF |
For Fujitsu/Panasonic car radio hosts, set all DIP switches to "OFF". For Pioneer car radio hosts, set switch 5 to "ON" and all others to "OFF". If you are unsure of your car's engine model, please contact customer support with a photo of the host chassis code.
Please note! This device will only work after the vehicle is started (ignition on).
4. Operating Instructions
4.1. Switching to CarPlay System
There are three ways to switch to the CarPlay interface:
- In the original car screen: First, click the “FM” icon, then click the “AUX” icon to enter.
- Using the steering wheel: Long press the voice button to enter.
- If there is no voice button: Press the “MODE” button to enter.

4.2. Control Key Operation
The system supports both touch screen control and original car button control.

Steering Wheel Button Functions:
- 1: Volume +
- 2: Volume -
- 3: Previous song
- 4: Next song
- 5: Answer the phone
- 6: Hang up the phone
- 7: Short press to wake up Siri; Long press 2s to switch CarPlay system.
4.3. Connecting to Wireless CarPlay
- On the device's menu, navigate to "SmartPhone Setting" and turn on "CarPlay".
- Check the Bluetooth Device name displayed on the car screen (e.g., "CAR-XXXX").
- On your iPhone, turn on Wi-Fi and Bluetooth. Go to Bluetooth settings and connect to the device named "CAR-BT_XXXX" (matching the car's Bluetooth name).
- A Bluetooth pairing request will appear on your iPhone. Confirm the code and pair.
- After successful pairing, a prompt "Use CarPlay with 'Carabtic'?" will appear. Select "Use CarPlay".

4.4. Connecting to Wireless Android Auto
- On the device's menu, navigate to "SmartPhone Setting" and turn on "AndroidAuto".
- Check the Bluetooth name starting with "CAR-xxx" in the Bluetooth interface on the car screen.
- On your Android phone, turn on Bluetooth. Search for and connect to the Bluetooth name (e.g., "TOYOTA Highlander" or "CAR-BT_XXXX") displayed on the car screen.
- A pairing request will pop up on your phone. Click "Pairing".
- After successful Bluetooth pairing, turn on the Android Auto app on your mobile phone, and the system will connect automatically.

4.5. Connecting to Wireless AirPlay / AutoLink (Screen Mirroring)
- On the device's menu, navigate to "SmartPhone Setting" and turn on "AirPlay" or "AutoLink".
- On your phone, select the Wireless LAN option. The search bar will show "CAR-WIFI-XXXX". Click the link, the password is 66668888.
- After the Wi-Fi connection is successful, return to the main interface of your phone, open the Shortcut menu page, select "Screen Mirroring" and turn it on.
- After your mobile phone's "Screen Mirroring" is turned on, select AirPlay to complete the wireless Screen Mirroring.

AutoLink supports AUX audio only. You can also connect it wired via a Type-C cable.
5. Basic Settings
5.1. Eliminating Echoes (AEC Delay)
To eliminate echoes during phone calls:
- Navigate to
Settings > Audio > AEC Delay. - Select "Start Auto AEC" and activate the echo cancelling setting. Wait 20 seconds for estimation.

5.2. Resolution Settings
Adjust display resolution based on your car's screen:
- Default regular resolution: 670*470
- Left and right display incomplete selection: Senna L/R not full 709*470
- RAV4 Corolla display leftward selection: RAV4 6 inch Left offset 670*470
5.3. Camera Settings
Find the camera settings in the product's system and select your camera type (e.g., After Market camera, OE Camera).
6. Maintenance and Firmware Upgrade
We do not recommend upgrading the firmware if the device is functioning normally. If you encounter problems that may be resolved by a firmware update, please contact customer service for assistance.
Firmware Upgrade Method:
- Unzip the firmware file to the root directory of a USB flash drive.
- Insert the USB flash drive into the USB port of the product.
- Navigate to
Module Settings > System > Firmware Upgradeand follow the on-screen instructions for manual upgrade.

7. Troubleshooting
7.1. Wi-Fi Disconnection Issues
If CarPlay/Android Auto connection frequently disconnects and returns to the menu screen, try changing the Wi-Fi signal channel.
- Go to
Settings > WiFi. - Change the Wi-Fi channel to 48 or 161. This can help mitigate frequency interference in the environment.

7.2. Audio Echo during Calls
Refer to section 5.1 for instructions on eliminating echoes using the AEC Delay setting.
7.3. General Connection Issues
- Ensure your phone's Bluetooth and Wi-Fi are enabled.
- Verify that the correct Bluetooth device is selected for pairing.
- Restart both your phone and the car's infotainment system.
- Check that the device is powered on (vehicle ignition is on).
8. Specifications
| Parameter | Value |
|---|---|
| Operating Voltage | 12 V |
| Operating Temperature | -30 ~ +75°C |
| Stored Temperature | -30 ~ +85°C |
| Environment Humidity | ≤98% (at 45°C), 65±5% (rated) |
| Power Consumption | 1A (rated), 3A (Max) |
| Shutdown Current | 300mA (Clock is on) |
| Quiescent Current | Less than 3mA |
| Charging Current | ≤2A (If USB charging current >1A, host activates circuit protection to control current below 1.5A to prevent product damage) |
| Host Dimensions (L x W x H) | 184mm x 84mm x 25mm |
9. User Tips
- For optimal performance, ensure your smartphone's operating system is up to date.
- Always connect your phone via Bluetooth first for wireless CarPlay/Android Auto to initiate properly.
- If experiencing audio issues, check the car's original audio source settings (e.g., switch to AUX).
- Keep the device's firmware updated only if advised by customer support or if experiencing specific issues that an update addresses.
10. Frequently Asked Questions (FAQ)
- Q: Why does my CarPlay/Android Auto disconnect frequently?
- A: This could be due to Wi-Fi interference. Try changing the Wi-Fi channel in the device settings to 48 or 161 (refer to section 7.1).
- Q: I hear an echo during phone calls. How can I fix this?
- A: You can adjust the AEC Delay setting in the audio settings to eliminate echoes. Refer to section 5.1 for detailed steps.
- Q: The device is not turning on.
- A: Ensure your vehicle's ignition is on. The device requires the car to be started to function.
- Q: Can I use my original car's controls with this device?
- A: Yes, the device supports original car button control, touch screen control, and voice control (Siri/Google Assistant). Refer to section 4.2 for details.
11. Support
If you have any questions, encounter problems, or require firmware updates, please contact customer service for assistance. You can also refer to the User Manual (PDF) for additional information.