PowerMotor HR136

Contents

Universal Motorcycle Handlebar Grips

Model: HR136 | Brand: PowerMotor

1. Product Overview

This manual provides basic usage guidelines for the PowerMotor HR136 Universal Motorcycle Handlebar Grips. These handlebar end plugs are designed to provide protection, reduce vibration, and enhance the aesthetic of your motorcycle's handlebars. Due to the wide variety of motorcycle models, specific details may vary, but these guidelines will help you properly install, use, and maintain your accessories.

PowerMotor Handlebar Grips installed on a motorcycle

Figure 1: PowerMotor Handlebar Grips installed on a motorcycle.

2. Safety Warnings

  • Read and Understand: Before using any accessories, please read this manual and any specific guide that comes with the product in detail.
  • Professional Installation: Unless you have the corresponding skills, it is recommended that professional technicians install these accessories.
  • Suitability: Make sure the accessories match your specific motorcycle model, year, and handlebar specifications.
  • Personal Protection: Always wear appropriate protective equipment (e.g., gloves, eye protection) when installing or replacing accessories.
  • Comply with Regulations: Ensure that all accessories comply with local traffic regulations and safety standards.

3. Setup and Installation

Proper installation ensures the safety and effectiveness of your handlebar grips. Follow these steps carefully:

  1. Prepare Handlebars: Ensure the ends of your motorcycle handlebars are clean and free from debris. If existing end caps are present, remove them.
  2. Insert Grips: Gently insert the expansion mechanism of the handlebar end plug into the open end of your motorcycle's handlebar.
  3. Tighten Screw: Using an appropriate screwdriver, carefully tighten the central screw on the end plug. As you tighten, the internal expansion mechanism will expand, securing the plug firmly inside the handlebar.
  4. Check Security: Once tightened, firmly pull and twist the end plug to ensure it is securely fastened and does not move. Do not overtighten, as this may damage the expansion mechanism or the handlebar.
  5. Repeat for Other Side: Install the second handlebar end plug on the other side of your motorcycle's handlebar following the same steps.
Pair of PowerMotor Handlebar End Plugs, side view

Figure 2: Side view of the PowerMotor Handlebar End Plugs, showing the expansion mechanism.

Video 1: Product showcase of the PowerMotor Handlebar End Plugs.

4. Operating Instructions

Once installed, the handlebar grips require minimal operational input. Before each ride, perform a quick check:

  • Pre-Ride Check: Ensure both handlebar end plugs are still securely fastened. They should not be loose or rotate freely.
  • Functionality: The grips act as counterweights and protective elements. Ensure they do not interfere with the operation of your throttle, brakes, or clutch levers.

5. Maintenance

Regular maintenance will prolong the life and appearance of your handlebar grips:

  • Regular Inspection: Periodically check the tightness of the central screw. Re-tighten if any looseness is detected.
  • Cleaning: Clean the chrome surface with a soft cloth and a mild, non-abrasive cleaner. Avoid harsh chemicals that could damage the finish.
  • Damage Check: Inspect for any signs of damage, such as cracks, dents, or corrosion.

6. Troubleshooting

  • Loose Grips: If the handlebar end plugs become loose, re-tighten the central screw. If they continue to loosen, inspect the expansion mechanism for wear or damage.
  • Incompatible Accessories: Do not use accessories that are incompatible with your motorcycle. Ensure the internal diameter of your handlebars is suitable for these plugs.
  • Damaged Grips: If the accessories are damaged or their performance is degraded (e.g., severe corrosion, broken parts), please stop using them immediately and seek professional repair or replacement.

7. Specifications

FeatureDetail
Brand NamePowerMotor
Model NameHR136
ColorSilver (Chrome Finish)
Cap Height33mm (1.299 inches)
Cap Diameter36mm (1.417 inches)
Total Length69mm (2.716 inches)
OriginMainland China
Dimensions diagram of the handlebar end plugs

Figure 3: Dimensions of the PowerMotor Handlebar End Plugs.

8. User Tips

  • For a secure fit, ensure the internal diameter of your handlebars is within the compatible range for the expansion mechanism.
  • Apply a small amount of thread locker (e.g., Loctite blue) to the central screw threads before tightening for added security against vibration-induced loosening.

9. Warranty and Support

For any warranty claims, technical support, or inquiries regarding your PowerMotor HR136 Handlebar Grips, please contact the seller or manufacturer directly. Keep your purchase records for reference.

A PDF version of general motorcycle accessory guidelines is available for download from the seller's product page, which may contain additional information relevant to motorcycle accessories in general.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.