DiFang Mini WiFi Security Camera User Manual

1. Introduction

Thank you for choosing the DiFang Mini WiFi Security Camera. This manual provides detailed instructions for setting up, operating, and maintaining your camera to ensure optimal performance and security. This camera is designed for indoor use, offering features like 1080P HD video, two-way audio, motion detection, and night vision, making it ideal for monitoring pets, babies, or general home surveillance.

Figure 1: DiFang Mini WiFi Security Camera in a home setting, showing pet and baby monitoring capabilities.

2. Safety Information

Disclaimer:

⚠️️Camera products can only be used for purposes permissible under applicable law and regulations. Misuse of the product for any illegal activities is strictly forbidden. Please comply with the applicable laws and regulations in your country/area.

FCC Compliance Statement:

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

NOTE: This device and its antenna(s) must not be co-located or operate in conjunction with any other antenna or transmitter.

RF Exposure Statement:

To maintain compliance with FCC's RF Exposure guidelines, this equipment should be installed and operated with a minimum distance of 20cm between the radiator and your body. This device and its antenna(s) must not be co-located or operate in conjunction with any other antenna or transmitter.

3. Package Contents

Please check the box for the following items:

• Camera Unit ×1
• USB Power Cable ×1
• User Manual ×1
• Mounting accessories (adhesive pads, base plate)

Figure 2: Contents included in the product package.

4. Product Overview

Familiarize yourself with the camera's components:

Figure 3: Front and back view of the camera with labeled components.

• HD Lens: Captures 1080P video.
• Megaphone: For two-way audio communication.
• Reset Key: Used to reset the camera (press for 6 seconds).
• Pilot Lamp: Indicates camera status.
• TF Card Slot: For inserting a Micro SD card (max 32GB, not included) for local storage.
• USB Charging Port: For power supply.

5. Setup Guide

Follow these steps to set up your DiFang Mini WiFi Security Camera:

5.1. App Download

Scan the QR code below to download the iWFCam app, compatible with your phone system (iOS/Android).

Figure 4: Scan this QR code to download the iWFCam app.

5.2. Camera-Phone Connection (AP Mode)

1. Switch on the device: Plug in the camera. The indicator light should turn on.
2. Connect to camera hotspot: Go to your phone's Wi-Fi settings (WLAN). Find the camera's hotspot signal (named with "BK***" without a password) and connect to it.
3. Confirm connection (Android only): If you are using an Android phone, a message to confirm the connection may pop up. Please keep connecting with the camera.

Note: The camera-phone connection should be finished within 5 meters for a strong signal.

Figure 5: Steps for connecting your phone to the camera in AP Mode.

5.3. Camera-APP Remote Connection (IP Mode)

1. Add camera to app: Start the iWFCam app. The camera should automatically be added and appear as "Online".
2. Configure Wi-Fi: Click the "Setting" icon next to the camera in the app. Select "Wifi Config".
3. Select your router: Choose your home Wi-Fi router from the list and enter its network password.
4. Wait for connection: The camera will update for remote control. Once it shows "Online", the setup is complete.

Note: The camera-router connection should be finished within 5 meters for a strong signal.

Figure 6: Steps for connecting the camera to your home Wi-Fi network.

5.4. Installation Options

The camera can be wall-mounted, pendant-mounted, or placed on a flat surface.

Figure 7: Various installation methods for the camera.

6. Operating Instructions

6.1. Camera Live-feed Page

Once connected, click on the camera in the iWFCam app. A pop-up message may ask you to change the password; you can skip or change it for security. On the live-feed page, you can adjust various settings:

• Brightness: Adjust video brightness.
• Night Vision: Toggle infrared night vision.
• Video Resolution: Change video quality (e.g., 1080P).
• Audio: Enable/disable audio.
• Microphone: Use for two-way audio.
• Video/Photo: Capture video recordings or still photos.

Figure 8: Live-feed interface and control options within the iWFCam app.

6.2. Two-Way Audio Intercom

The camera features a built-in microphone and speaker, allowing for real-time two-way communication. You can hear and speak to family members, pets, or visitors directly through the app.

Figure 9: Using the two-way voice intercom to communicate with someone at the door.

6.3. Motion Detection and Alarms

The camera is equipped with smart motion detection. When unusual movement is detected, the camera will send instant push notifications to your phone via the iWFCam app. It also supports siren and spotlight alarms.

Figure 10: Real-time alarm reminders for various detected activities.

6.4. Night Vision

The camera provides color night vision, ensuring clear monitoring even in low-light conditions.

Figure 11: Camera providing clear night vision for monitoring a baby.

6.5. Recording and Storage

Insert a Micro SD card (up to 32GB) into the TF card slot for local storage. The camera supports looping recording, automatically overwriting old recordings when the card is full.

Figure 12: App interface for reviewing recorded footage from the SD card.

6.6. Video Sharing

The iWFCam app allows you to share video feeds with family and friends, enabling multiple users to view the camera's live stream online.

Figure 13: Family and friends can watch fun videos online through the sharing feature.

6.7. 360° Rotation

The camera features a fully adjustable 355° rotating base, allowing you to manually pan the camera to monitor every corner of your space with no blind spots.

Figure 14: The camera offers 360° up and down, left and right free rotation.

7. Specifications

8. Maintenance

• Cleaning: Use a soft, dry cloth to clean the camera lens and body. Avoid using harsh chemicals or abrasive cleaners.
• Firmware Updates: Regularly check the iWFCam app for firmware updates to ensure your camera has the latest features and security patches.
• Storage: If storing the camera for an extended period, disconnect it from power and store it in a cool, dry place.

9. Troubleshooting

Camera not connecting to Wi-Fi:

• Ensure the camera is within 5 meters of your router during setup for a strong signal.
• Verify that you have entered the correct Wi-Fi password.
• Check if your router is operating on a 2.4GHz band, as the camera only supports 2.4GHz Wi-Fi.
• Try resetting the camera by pressing the reset button for 6 seconds.

No video feed or poor image quality:

• Check your internet connection speed.
• Ensure the camera lens is clean and free from obstructions.
• Adjust the video resolution settings in the iWFCam app.

SD card not recording:

• Ensure the Micro SD card is inserted correctly.
• Check if the SD card is formatted correctly (FAT32 recommended).
• Verify that the SD card is not full.
• The camera supports a maximum of 32GB Micro SD card.

10. User Tips

• For optimal performance, place the camera in a central location within your monitoring area.
• Regularly check the app for motion detection alerts to stay informed about any activity.
• Utilize the two-way audio feature to communicate with family or deter unwanted visitors.
• Consider using a dedicated Micro SD card for continuous recording and easy access to footage.

11. Warranty and Support

For any product-related inquiries, technical support, or warranty claims, please contact the seller or refer to the official product page for more information. You can also refer to the full user manual PDF for additional details: View User Manual (PDF).

12. Product Video

Watch this video for a quick overview of the DiFang Mini WiFi Security Camera and its features.