Honda MC94900

Contents

Motorcycle Speedometer Digital Display Instruction Manual

Model: MC94900

Applicable Models: Honda CG Titan 160 Fan (2015-2024)

1. Product Overview

Thank you for choosing the MC94900 Digital Motorcycle Speedometer. This plug-and-play accessory is designed to provide clear and accurate readings for your Honda CG Titan 160 Fan motorcycle. It features a digital display for speed, RPM, mileage, fuel level, and clock, ensuring optimal visibility day or night.

Digital Motorcycle Speedometer for Honda CG Titan 160 Fan

Digital Motorcycle Speedometer for Honda CG Titan 160 Fan

Watch a demonstration of the speedometer's functionality:

Demonstration of the motorcycle speedometer's functionality and display clarity.

2. Specifications

2.1 General Parameters

  • Model Name: MC94900
  • Material: ABS Plastic
  • Color: Black (with transparent casing)
  • Item Weight: 0.28kg
  • Item Length: 17.9cm
  • Item Width: 7.6cm
  • Item Height: 11.1cm
  • Built-in Device: No
  • High-concerned chemical: None

2.2 Display and Performance

  • Clock: 24H
  • Fuel Level: 6 Segments display (0-25Ω full tank, 245-1000Ω per segment blinking)
  • Speed Display: km/h
  • Speed Display Range: 0-199km/h (85Hz corresponds to 10km/h)
  • Odometer Display: 0~999999km
  • Odometer Display Unit: 0.1km
  • Trip Meter Display Range: 999.9km
  • Trip Meter Display Unit: 0.1km
  • RPM Range: 0~11000r/min (32Hz corresponds to 1000r/min)

2.3 Package Dimensions

  • Package Length: 21cm
  • Package Width: 11cm
  • Package Height: 9cm
  • Package Weight: 0.37kg
Motorcycle Speedometer Dimensions (Front, Back, Side Views)

Motorcycle Speedometer Dimensions (Front, Back, Side Views)

3. Setup and Installation

This speedometer is designed for plug-and-play installation. Ensure your motorcycle is turned off and the battery is disconnected before proceeding with installation.

3.1 Wiring Instructions

Important Note: The wiring must be connected according to the functional instructions provided in the diagram, not based on wire colors alone. Wire colors may vary.

Wiring diagram for the motorcycle speedometer, showing pin assignments for various functions.

Wiring diagram for the motorcycle speedometer, showing pin assignments for various functions.

Wiring Pin Assignments
Position Number Function
1EFI
2N gear
3Turn right signal
4Turn left signal
5High beam
6CNG indicator light
7Speed
8Fuel
9RPM
11Ignition switch power
1312V power supply
14Ground wire

After connecting the wires according to the diagram, securely mount the speedometer in its designated position on the motorcycle dashboard.

4. Operating Instructions

The speedometer features two buttons for adjustment and mode selection. Refer to the diagram below for button locations and display elements.

Labeled diagram of the speedometer display indicating RPM, high beam, turn signal, EFI, N gear, buttons, mileage, clock, speed, and fuel.

Labeled diagram of the speedometer display indicating RPM, high beam, turn signal, EFI, N gear, buttons, mileage, clock, speed, and fuel.

4.1 Mileage Mode Selection and Reset

  • Switching Mileage Modes: Short press the left button to toggle between Trip mileage and Total mileage display.
  • Resetting Trip Meter: While in Trip mode, long press the right button to reset the trip meter to zero.

4.2 Clock Setting Mode

  1. Enter Clock Setting: Simultaneously long press both the left and right buttons for 2 seconds to enter the clock setting mode. The hour digits will start flashing.
  2. Set Hour Digits:
    • Short press the right button to increase the hour digits by 1 (range 0-11).
    • Long press the right button for a fast loop through the hour digits.
  3. Set Minute Digits: Short press the left button to switch to minute digits setting mode (the hour digits will stop flashing, and minute digits will start flashing).
  4. Adjust Minute Digits:
    • Short press the right button to increase the minute digits by 1 (range 0-59).
    • Long press the right button for a fast loop through the minute digits.
  5. Exit Clock Setting: Once the minute setting is complete and the minute digits are flashing, short press the left button to exit the clock setting mode.
  6. Automatic Exit: If no button is pressed during the flashing of either the minute or hour digits for 60 seconds, the time setting mode will automatically exit.

5. Maintenance

To ensure the longevity and optimal performance of your speedometer, follow these maintenance guidelines:

  • Cleaning: Use a soft, dry cloth to clean the display and casing. Avoid abrasive cleaners or solvents that could damage the plastic.
  • Environmental Conditions: Keep the speedometer dry and avoid exposure to extreme temperatures or direct sunlight for prolonged periods.
  • Connections: Periodically check all electrical connections to ensure they are secure and free from corrosion.
  • Storage: If storing the motorcycle for an extended period, ensure the speedometer is protected from dust and moisture.

6. Troubleshooting

If you encounter any issues with your speedometer, refer to the following common problems and solutions:

  • Display Not Working:
    • Check all wiring connections as per the installation diagram. Ensure they are secure and correctly matched by function.
    • Verify that the motorcycle's battery has sufficient charge and is properly connected.
    • Inspect the fuse related to the dashboard/instrument cluster.
  • Incorrect Speed/RPM Readings:
    • Ensure the speed sensor and RPM signal wires are correctly connected and not damaged.
    • Confirm the speedometer is compatible with your specific motorcycle model (Honda CG Titan 160 Fan).
  • Buttons Unresponsive:
    • Check for any physical obstructions or debris around the buttons.
    • Ensure the unit is receiving power.

If the problem persists after attempting these solutions, please contact customer support for further assistance.

7. User Tips

  • Compatibility Check: Always verify the speedometer's compatibility with your specific motorcycle model and year before purchase and installation. While this model is designed for Honda CG Titan 160 Fan (2015-2024), other models like the Honda CBF160 may have different wiring or mounting requirements.
  • Wiring Verification: Double-check all wiring connections against the provided diagram. Incorrect wiring is a common cause of malfunction. Pay attention to the function of each pin rather than relying solely on wire colors.
  • Visibility: The display is designed for clear visibility in various lighting conditions. Ensure no external factors (e.g., glare from accessories) obstruct your view of the display.

8. Support

For additional information, detailed diagrams, or technical support, please refer to the official user manual PDF or contact the seller directly.

You can view the official item guides and documents here: User Manual (PDF)

For any further inquiries or assistance, please contact the BH Speedometer Store customer service.

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.