1. Introduction
This manual breast pump is designed to provide a gentle and efficient way for breastfeeding mothers to express milk. Its simple, handheld design makes it ideal for both home use and on-the-go scenarios. The pump features a soft rubber suction ball for controlled manual pumping and a transparent horn for easy monitoring of milk flow. All components are detachable for thorough cleaning and maintenance, ensuring hygiene and safety for both mother and baby.
2. Safety Information
- Warning: For use under adult supervision only. Keep all detachable parts away from infants and young children to prevent choking hazards from small components.
- Warning: Do not use if any parts are damaged (e.g., cracks in the plastic horn or tears in the rubber ball). Damaged parts may cause breast discomfort or injury.
- The breast pump is made of food-grade rubber and plastic materials, which are non-toxic, BPA-free, and safe for contact with breast milk. They are designed to be gentle on the skin and comply with safety standards for maternity products.
3. Product Overview & Components
The manual breast pump consists of two main detachable components:
- Transparent Plastic Horn: This part is placed over the breast and allows for visual monitoring of milk flow.
- Soft Rubber Suction Ball (Green): This component creates the vacuum for milk expression when squeezed and released.
4. Specifications
| Feature | Detail |
|---|---|
| Dimensions | 13.00 x 7.50 x 6.00 cm (5.12 x 2.95 x 2.36 inches) |
| Weight | 75 g |
| Material | Food-grade Rubber, Plastic (BPA-free) |
| Color | Green (suction ball), Transparent (horn) |
| Origin | Mainland China |
| Operation Type | Manual |
5. Setup
5.1. Initial Cleaning
Before first use, and after each subsequent use, disassemble all parts of the breast pump. Wash them thoroughly with warm water and a mild detergent. Rinse all components completely to remove any milk residue or soap. Ensure no abrasive cleaners are used, as they can damage the rubber or plastic surfaces.
5.2. Assembly
- Ensure both the transparent plastic horn and the soft rubber suction ball are clean and dry.
- Securely connect the transparent plastic horn to the opening of the soft rubber suction ball.
- Check that all detachable parts fit tightly without any gaps to prevent milk leakage during operation.
6. Operating Instructions
6.1. Positioning
- Find a comfortable and relaxed position.
- Place the transparent plastic horn over your breast, ensuring your nipple is centered within the horn.
- Press the horn gently against your breast to create a snug fit around the areola, forming an airtight seal. This seal is crucial for effective suction.
6.2. Milk Expression
- Once properly positioned, gently squeeze the soft rubber suction ball to create a vacuum.
- Slowly release the suction ball to allow milk to flow into the horn.
- Repeat the squeezing and releasing motion rhythmically to express milk.
- Adjust the pressure and rhythm based on your comfort level and milk flow. Avoid over-squeezing or applying excessive pressure, which can cause discomfort.
- The transparent horn allows for real-time observation of milk flow and collection, helping you adjust your technique for optimal efficiency.
7. Cleaning & Maintenance
7.1. Thorough Cleaning
- After each use, immediately disassemble all components of the breast pump.
- Wash all parts with warm water and a mild, food-safe detergent.
- Rinse thoroughly under running water to ensure all milk residue and soap are removed.
- Avoid using abrasive cleaners, brushes with stiff bristles, or harsh chemicals, as these can scratch or damage the rubber and plastic surfaces.
7.2. Proper Storage
- Ensure all components are completely dry before reassembly or storage. Air drying on a clean rack is recommended.
- Store the breast pump in a clean, dry place, away from direct sunlight and high temperatures. Exposure to direct sunlight or extreme heat can cause material degradation and reduce product durability.
8. Troubleshooting
- No Suction or Weak Suction:
- Ensure the plastic horn is securely attached to the rubber suction ball.
- Check for any gaps between the horn and your breast; reposition to create a tight seal around the areola.
- Inspect the rubber suction ball and plastic horn for any cracks or tears that might compromise suction. If damaged, discontinue use.
- Discomfort During Pumping:
- Adjust the pressure and rhythm of squeezing the rubber ball. Pumping should not be painful.
- Ensure your nipple is centered in the horn and not rubbing against the sides.
- If discomfort persists, consult a lactation specialist.
- Milk Leakage:
- Verify that all components are securely connected and there are no gaps.
- Ensure the horn forms a tight seal against your breast.
9. User Tips
- Relaxation is Key: Try to pump in a calm environment. Stress can inhibit milk flow.
- Warm Compress: Applying a warm compress to your breasts before pumping can help stimulate let-down.
- Hydration: Stay well-hydrated throughout the day to support milk production.
- Gentle Massage: Gently massage your breasts before and during pumping to encourage milk flow.
- Listen to Your Body: Pumping should never be painful. If you experience pain, stop and re-evaluate your technique or consult a healthcare professional.
10. Frequently Asked Questions (FAQs)
- Q1: Is the breast pump material safe for breastfeeding mothers and babies?
- A: Yes, the breast pump is made of food-grade rubber and plastic materials, which are non-toxic, BPA-free, and safe for contact with breast milk. They are designed to be gentle on the skin and comply with safety standards for maternity products.
- Q2: How to ensure effective suction when using the manual breast pump?
- A: Ensure the horn fits snugly around the areola to create a seal. Squeeze the rubber ball gently and release slowly to generate steady suction. Adjust pressure based on comfort—avoid over-squeezing to prevent breast discomfort while maintaining efficient milk expression.
11. Warranty & Support
For any questions regarding the product, its operation, or potential issues, please refer to the seller's support channels. Specific warranty details may vary and are typically provided at the point of purchase or through the seller's official documentation.
A user manual in PDF format is also available for download: User manual (PDF)