1. Introduction
This manual provides detailed instructions for the installation, operation, and maintenance of your CARABC Wireless CarPlay and Android Auto GPS Navigation Module. Please read this manual thoroughly before installation and use to ensure proper functionality and to avoid damage.
1.1 Product Overview
The CARABC module integrates Apple CarPlay and Android Auto functionalities into your vehicle's existing infotainment system. It allows for seamless control of phone functions, navigation, music, and voice commands (Siri/Google Assistant) directly from your car's display and controls. The module also supports reversing video input, wireless Airplay for iPhone, and USB music playback.
1.2 Key Features
- Wireless Apple CarPlay and Android Auto support.
- Integration with original car controls (knob, buttons, touchscreen, steering wheel).
- Voice command functionality (Siri/Google Assistant).
- Map navigation support (Google Maps, Waze, Apple Maps, etc.).
- Online music streaming and USB music playback.
- Reversing video input capability.
- Wireless Airplay for iPhone.
1.3 Compatibility
This product is designed for specific Toyota models equipped with Touch2 & Entune2.0 System Hosts (Panasonic/Fujitsu/Pioneer). Please verify your car's system and model year before installation.
Important Compatibility Notes:
- Not suitable for cars with a 360-degree camera or Bird's Eye View system.
- Not suitable for car radios with a JBL sound system.
- 2014-2019 Toyota Corolla: Not compatible with 86140-02540 Fujitsu with 7" display.
- 2014-2019 Toyota 4Runner: Only fits Panasonic & Fujitsu units; Pioneer is NOT supported.
- 2016-2019 Toyota Prius: Not compatible with Prius models equipped with an 11.6" screen.
- 2014-2018 Toyota RAV4: Not compatible with 86100-42241 radio.
Compatible Models (System: Touch 2/Entune 2.0, WITHOUT 360 camera/bird's eye view system):
- 2014-2019 Toyota Highlander
- 2016-2019 Toyota Prius c
- 2016-2017 Toyota Prius v
- 2015-2017 Toyota Sienna
- 2014-2019 Toyota Tacoma
- 2014-2018 Toyota Yaris
- 2016-2019 Toyota C-HR
- 2015-2017 Toyota Alphard
- 2014-2019 Toyota Avensis
- 2015-2019 Toyota Hilux
- 2015-2018 Toyota Avalon
- 2014-2019 Toyota Sequoia
- 2014-2019 Toyota Tundra
- 2017-2019 Toyota 86
- 2014-2019 Toyota Verso
- 2014-2019 Toyota Land Cruiser
- 2014-2017 Toyota Camry
- 2014-2019 Toyota Auris
- 2015-2019 Toyota Fortuner
2. Setup and Installation
Professional installation is recommended. Ensure the vehicle's ignition is off and the battery is disconnected before beginning installation.
2.1 Package Contents
- CARABC Wireless CarPlay Android Auto Module (Host)
- Power Cable
- USB Video Cable
- WiFi Antenna
- Connection Harnesses
2.2 Connection Diagram
Follow the diagram carefully for correct wiring. Each numbered point corresponds to a specific connection.
- Connect with Original Car's Main Unit - 24PIN
- Connect with Original Car's Main Unit - 10PIN
- Connect with Original Car's Main Unit - 28PIN
- Connect with Original Car's Plug - 28PIN
- Connect with Original Car's Plug - 10PIN
- Connect with Original Car's Plug - 24PIN
- Forward Looking Input
- Camera Power Supply
- GND (Ground)
- USB Cable
- WIFI Antenna
2.3 DIP Switch Settings (Vehicle Dialing Table)
The module features DIP switches to configure compatibility with different head unit manufacturers. Incorrect settings may lead to malfunction.
| Model | Dialing Switch Position (1-8) | |||||||
|---|---|---|---|---|---|---|---|---|
| Fujitsu Panasonic | OFF | OFF | OFF | OFF | OFF | OFF | OFF | OFF |
| Pioneer | OFF | OFF | OFF | OFF | ON | OFF | OFF | OFF |
Summary:
- All OFF by default: Applicable to Panasonic and Fujitsu mainframes.
- Switch 5-ON: Applicable to Pioneer mainframes.
3. Operating Instructions
3.1 Switching to CarPlay/Android Auto System
There are three methods to switch to the CarPlay/Android Auto interface:
- From the original car screen:
First, click the "FM" icon, then click the "AUX" icon to enter the CarPlay/Android Auto interface.
Locate and press the FM, then AUX icons on your car's display to switch to the module's interface. - Using the steering wheel:
Long press the voice button on your steering wheel to enter.
- If no voice button is available:
Press the "MODE" button on your steering wheel to enter.
3.2 Control Key Operations
The module supports both touch screen and original car button controls.
Touch Screen Control
Operate the CarPlay/Android Auto interface directly via the car's touchscreen.
Original Car Button Control
Utilize your vehicle's existing buttons for common functions:
- Volume +: Increase volume.
- Volume -: Decrease volume.
- Previous song: Go to the previous track.
- Next song: Go to the next track.
- Answer the phone: Accept an incoming call.
- Hang up the phone: End a call.
- Short press voice button: Wake up Siri/Google Assistant.
- Long press voice button (2 seconds): Switch CarPlay system.
3.3 Wireless CarPlay Connection
- On the module's interface, select "Bluetooth".
- Check the Bluetooth device name, which will appear as "CAR-BT-xxxx".
- On your iPhone, go to Settings -> Wi-Fi, turn on Wi-Fi and keep it on.
- Then, go to Settings -> Bluetooth, select the Bluetooth device name "CAR-BT-XXX" and click "Pair".
- A pairing request will pop up; confirm it.
- After successful Bluetooth pairing, your iPhone will prompt you to enable CarPlay. Confirm this option.
3.4 Wireless Android Auto Connection
- On the module's interface, select "Bluetooth".
- Check the Bluetooth device name, which will appear as "CAR-BT-xxxx".
- On your Android phone, go to Bluetooth settings, select the Bluetooth name "CAR-BT-XXX" and click "Pair".
- A pairing request will pop up; confirm it.
- Turn on the Android Auto app on your mobile phone, and the system will connect automatically.
3.5 Apple Wireless Screen Mirroring
- On the module's interface, select "Airplay".
- On your iPhone, go to Settings -> Wi-Fi, select the "CAR-WIFI-XXX" network (password: 66668888) and connect.
- After the CarPlay Wi-Fi connection is successful, return to your iPhone's main interface.
- Open the shortcut menu page (swipe down from top-right or up from bottom, depending on iPhone model).
- Select "Screen Mirroring" and choose "Airplay" to complete the wireless screen mirroring.
3.6 Bluetooth Audio Connection (for original car Bluetooth)
If you wish to use the original car's Bluetooth for audio after enabling the module:
- On the module's interface, go to 【Setting】 -> 【System】.
- Turn on the switch corresponding to "Use Car's BT channel".
- Connect your phone directly to the original car's Bluetooth.
- After successful connection, press the top left corner of the screen (mute button) or the PRW button to mute and select Bluetooth for switching.
- If prompted, click the 【ON】 button in the popup window, then click the checkmark to confirm.
- This setting will take effect after a reboot.
Note:
- If your car supports a steering wheel voice switching system, you can use this feature.
- If there is a PRW button or mute button on your car screen, it can also enable this function.
4. Settings Menu
Access the settings menu to customize various aspects of the module's operation.
4.1 Camera Settings
Navigate to Settings -> Car Settings to configure camera options.
- Camera Type: Select between OEM Camera or Aftermarket Camera.
- Resolution: Adjust display resolution.
- Default regular resolution: 670*470
- Left and right display incomplete selection: Senna L/R not full 709*470
- RAV4 Corolla display leftward selection: RAV4 6" Left offset 670*470
4.2 Audio Settings
Navigate to Settings -> Audio to adjust audio parameters.
- Navi Volume: Adjust navigation voice volume.
- Phone Volume: Adjust call volume.
- Music Volume: Adjust music playback volume.
- EQ: Equalizer settings (if available).
- AEC Delay: For echo cancellation.
To correct echo, go to Settings -> Audio -> AEC Delay, then click the "Start Auto AEC" button. During this process:
- Keep the car quiet.
- Turn the volume to a moderate position.
- Click "Start Auto AEC" to cancel echo.
5. Specifications
| Feature | Specification |
|---|---|
| Brand | CARABC |
| Product Size | 128mm * 84mm * 25mm |
| Applicable Model | For Toyota (Touch2 & Entune2.0 System) |
| Main Function | CarPlay & Android Auto |
| Phone OS System Suitable | iOS & Android |
| Operating Voltage | 12 V |
| Operating Temperature | -30°C to +75°C |
| Stored Temperature | -30°C to +85°C |
| Environment Humidity | ≤98% (at 45°C), 65±5% (rated) |
| Power Consumption | 1A (rated), 3A (Max) |
| Shutdown Current | 300mA (Clock is on) |
| Quiescent Current | Less than 3mA |
| Charging Current | <2A (Host activates circuit protection if USB charging current >1A to control current below 1.5A) |
6. Maintenance
To ensure the longevity and optimal performance of your CARABC module, follow these general maintenance guidelines:
- Keep the module and connections clean and free from dust and debris.
- Avoid exposing the module to extreme temperatures or humidity outside of the specified operating range.
- Do not attempt to open or modify the module, as this will void the warranty and may cause damage.
- Ensure all cables are securely connected to prevent intermittent issues.
7. Troubleshooting
If you encounter issues with your CARABC module, please refer to the following common problems and solutions:
7.1 Common Issues & Solutions
- Module not powering on or no display:
- Check all power connections as per the installation diagram.
- Ensure the vehicle's battery is properly connected and providing power.
- Verify the DIP switch settings match your car's head unit manufacturer (Panasonic/Fujitsu/Pioneer).
- CarPlay/Android Auto not connecting wirelessly:
- Ensure Bluetooth is enabled on both your phone and the module.
- For CarPlay, ensure Wi-Fi is also enabled on your iPhone.
- Confirm the correct "CAR-BT-xxxx" device is selected for pairing.
- Try restarting both your phone and the car's infotainment system.
- Ensure the Android Auto app is running on your Android phone.
- Intermittent connection or freezing:
- Check for loose cable connections.
- Ensure your phone's operating system is up to date.
- Try re-pairing your phone with the module.
- Perform a factory reset on the module (Settings -> System -> Factory Reset).
- Audio echo during calls:
- Access the AEC Delay setting (Settings -> Audio -> AEC Delay).
- Ensure the car is quiet and the volume is at a moderate level.
- Click "Start Auto AEC" to recalibrate echo cancellation.
- Incompatibility with specific car models/radios:
- Double-check the detailed compatibility list in Section 1.3.
- Verify your car does not have a 360-degree camera, JBL sound system, or specific incompatible radio part numbers (e.g., 86100-42241 for RAV4, 86140-02540 for Corolla Fujitsu 7" display, 11.6" screen for Prius).
- The module is designed for Toyota vehicles with Touch2 & Entune2.0 systems only, not other brands like Honda HR-V.
- Incorrect DIP switch instructions for Pioneer:
- As per the manual, for Pioneer mainframes, ensure DIP switch #5 is set to ON, and all other switches are OFF.
- Cable connectors do not fit:
- Ensure you have the correct module version for your specific car model and year.
- Verify that your car's radio system is indeed Touch2 or Entune2.0.
- If connectors still do not match, contact customer support with photos of your car's radio and the provided cables.
8. User Tips
- Screen Resolution: The visual quality of CarPlay/Android Auto will be limited by the resolution of your car's original radio screen. This is a characteristic of the original display, not the module.
- Smooth Operation: Many users report smooth operation and quick connection times, especially when correctly installed and configured.
- Steering Wheel Controls: The module generally integrates well with existing steering wheel controls for audio and call management.
- Value for Money: For integrating CarPlay/Android Auto into compatible Toyota systems, this module is often considered a cost-effective solution compared to full Android head unit replacements.
9. Warranty and Support
All CARABC products come with a one-year warranty from the date of purchase, provided they are used and maintained according to this manual.
9.1 Warranty Exclusions
The warranty does not cover:
- Damage resulting from scratches, dirt, or deformation after the free warranty period.
- Inconsistencies between the warranty card/purchase certificate and the product model, or altered marks.
- Products with unclear or missing barcodes.
- Damage caused by failure to use, maintain, repair, or refit the product according to the requirements of this manual.
- Damage due to force majeure events (e.g., fire, flood, traffic accident, lightning, earthquake).
9.2 Additional Resources
For further assistance or to view the original user manual in PDF format, please refer to the following link: User Manual (PDF)