EightFox AHD 1080P/720P Rear View Camera

Contents

EightFox AHD 1080P/720P Rear View Camera User Manual

Model: AHD 1080P/720P Dynamic Trajectory Rear View Camera

1. Product Overview

Thank you for choosing the EightFox AHD 1080P/720P Rear View Camera. This manual provides essential information for the proper installation, operation, and maintenance of your new camera system. Please read it thoroughly before use.

Video: Product demonstration showing the camera unit and its dynamic trajectory feature in action.

Package Contents:

  • Rear View Camera Unit
  • Video Cable (6M)
  • Power Cable
  • Mounting Screws (if applicable)
Package contents including camera, video cable, and power cable

Image: Contents of the camera package, showing the camera, video cable, and power cable.

2. Setup and Installation

Proper installation is crucial for optimal performance. It is recommended to have this product installed by a professional if you are unfamiliar with car electrical systems.

Wiring Diagram:

Installation wiring diagram for car reverse camera

Image: Detailed installation wiring diagram showing connections to the head unit, power, and reversing light.

Installation Steps:

  1. Connect Video Input: Connect the yellow RCA plug from the camera's video cable to the navigation video input plug (usually labeled "Video In" or "Camera In") on your car's head unit/monitor.
  2. Connect Reverse Detection Line: Connect the red wire from the video cable (often labeled "Trigger Wire" or "Reverse/BACK") to the navigation reverse detection line on your head unit. This tells the head unit to switch to the camera view when reverse gear is engaged.
  3. Power Connection:
    • Connect the red wire of the camera's power cable to the positive pole of the reversing light (+12V).
    • Connect the black wire of the camera's power cable to a good ground point (e.g., car chassis or negative pole of the reversing light).
  4. Camera Mounting: Securely mount the camera in the desired location (typically near the license plate) using the provided screws. Ensure the camera has a clear view of the rear.

Conversion Line Control:

The camera features control wires that allow you to customize its behavior. These wires are typically located near the camera's main cable connection.

Conversion line control diagram for camera features

Image: Diagram illustrating the function of the brown, green, and white control cables.

  • Brown Cable: Signal control (Cut to switch between AHD and CVBS video signals).
  • Green Cable: Parking line control (Cut to enable/disable parking guidelines).
  • White Cable: Mirror control (Cut to switch between rear view and front view/mirror image).

3. Operating Instructions

Dynamic Trajectory Guidelines:

Some models of this camera feature dynamic trajectory guidelines that adjust automatically based on the car's movement and steering wheel position, providing a more intuitive parking experience.

Diagram explaining dynamic trajectory guidelines

Image: Visual explanation of dynamic trajectory lines adjusting for left, straight, and right turns.

If your camera has dynamic trajectory and you wish to disable it, cut the white control line (mirror control line) as this often serves a dual function for some models.

Parking Line and Signal Control:

Parking line switch and signal control options

Image: Demonstrates how cutting specific wires can switch parking lines on/off and change video signal type (AHD/CVBS).

  • Parking Line Switch: Cut the green wire to toggle the parking guidelines on or off.
  • Signal Control: Cut the brown wire to switch between AHD (Analog High Definition) and CVBS (Composite Video Broadcast Signal) video output. Ensure your display supports the selected signal type.

Mirror Control (Rear to Front View):

Mirror control for rear to front view conversion

Image: Illustrates cutting the white wire to switch the camera's view from rear (mirror image) to front (normal image).

To change the camera's image from a mirrored rear view to a normal front view, cut the white control line. This is useful if you intend to use the camera as a front-facing camera.

Display Screen Settings:

Ensure your car's display is correctly configured for the camera's video signal (AHD or CVBS).

Display screen compatibility and settings for CVBS and AHD cameras

Image: Guide for setting up CVBS and AHD signals on various car displays and Android head units.

  • For CVBS Cameras: Suitable for 4.3-inch, 5-inch, 7-inch, 9-inch display screens, old style navigation DVDs. If AHD cannot be selected, set your display to CVBS NTSC. (Go to Car Settings >> Factory settings >> Reverse (picture) settings >> Select CVBS NTSC).
  • For AHD Cameras: The display screen of Android hosts has an Application and built-in AHD25 FPS channel. If AHD cannot be selected, AHD cameras are not supported. (Go to Car Settings >> Factory settings >> Reverse (picture) settings >> Select AHD 1080P).

4. Maintenance

Waterproof Design:

IP68 Waterproof rating for the camera

Image: Highlights the IP68 waterproof feature, ensuring durability in wet conditions.

The camera is designed with an IP68 waterproof rating, making it anti-fog and resistant to water. It can withstand reversing and parking in rainy conditions without fear of damage.

Cleaning:

To ensure clear image quality, periodically clean the camera lens. Use a soft, damp cloth to gently wipe away any dirt, dust, or water spots. Avoid using abrasive cleaners or harsh chemicals that could damage the lens or housing.

5. Troubleshooting

  • No Image/Signal on Display:
    • Check all cable connections (video, power, trigger wire) to ensure they are secure and correctly plugged in.
    • Verify the camera is receiving power (e.g., by checking the reversing light circuit).
    • Ensure your car's monitor is set to the correct video input channel for the camera.
    • Confirm the video signal type (AHD/CVBS) matches your display's capabilities and settings.
  • Distorted or Flickering Image:
    • Check the power supply to the camera; ensure it is stable (12V-24V).
    • Inspect the video cable for any damage, kinks, or pinches.
    • Ensure proper grounding for the camera.
  • Incorrect Parking Lines or No Guidelines:
    • Verify the camera is mounted straight and level.
    • If guidelines are not appearing, check if the green control wire has been cut (it should be intact for guidelines to show, or cut to disable).
    • If dynamic lines are not functioning as expected, ensure the camera model supports this feature and all connections are correct.
  • Image Orientation is Incorrect (Mirrored/Upside Down):
    • Use the white control wire (mirror control) to switch the image orientation. Cut or reconnect as needed.

6. Specifications

Detailed specification table for various camera models

Image: Comprehensive table detailing specifications across different camera models (720P/CCD, 1080P/720P, 1080P/CCD, etc.).

FeatureSpecification
Brand NameEightFox
OriginMainland China
CertificationCE
Lens MaterialGlass (Fish Eye)
Shell MaterialPlastic
Wire or WirelessWire
Guiding LineYes (Dynamic or Static, model dependent)
Viewing Angle150° - 170° (model dependent)
Length of Video Cable6M (Extension Cord: 6.5cm)
Video SignalAHD 720P-25 CVBS/CCD, AHD 1080P-25 AHD 720P-25, AHD 1080P-25 CVBS/CCD (model dependent)
Video PixelAHD 1280*720P CVBS 1280*720P, AHD 1920*1080P CVBS 1280*720P (model dependent)
Camera TypeGlass fish eye
Waterproof RatingIP68
Wire Control SignalCut wire to change (Signal, Parking Line, Mirror)

7. User Tips

  • Secure Connections: Always ensure all cable connections are tight and secure to prevent intermittent signal loss or power issues.
  • Test Thoroughly: After installation, test the camera in various lighting conditions (day, night, low light) and with different maneuvers to familiarize yourself with its performance.
  • Clean Lens Regularly: A clean lens is vital for clear images. Make it a habit to wipe the camera lens when cleaning your car's exterior.
  • Check Display Settings: If you experience image issues, always double-check your car's head unit display settings to ensure they match the camera's output (AHD/CVBS).

8. Warranty and Support

For technical support, warranty claims, or replacement parts, please contact the seller directly through the platform where the product was purchased. Please provide your order details for faster service.

An official user manual in PDF format may also be available for download. For additional details and comprehensive instructions, please refer to the provided PDF document: https://manuals.plus/m/31b4385d8b7ea01d70d2fbcbfa2f94e26432c043bcdd8d22eb3930e346f444a1.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.