1. Product Overview
This 220V COB LED strip light is designed for high-brightness illumination, suitable for a variety of applications including home, commercial, and decorative lighting. It features a COB (Chip-on-Board) design with 288 LEDs per meter, providing uniform and efficient light. The product is energy-efficient, durable, and offers three light color options: Cold White (6000K), Neutral White (4500K), and Warm White (3000K). It comes with a pre-installed EU or AU switch plug and complimentary mounting clips for easy installation.



2. Safety Precautions
⚠️ Warning: Read carefully before installation and use:
- Do not expose the light strip's plug to water or damp environments. The plug's power connection is not waterproof.
- Keep away from children, pets, and flammable items.
- Do not arbitrarily cut, splice, or modify the wiring or LED components beyond the designated cutting marks.
- Use only the included power plug; do not connect to incompatible power sources.
- Ensure adequate ventilation during use to prevent overheating.
- Disconnect power before installation, cleaning, or maintenance.

3. Setup and Installation
Step 1: Unboxing and Inspection
Verify all accessories are included in the package:
- COB LED Strip Light
- 220V Power Plug (EU or AU type with switch)
- Mounting Clips and Screws


Step 2: Connect Power
- Ensure the LED strip is fully unrolled and spread out before connecting to power.
- Connect the LED strip to the provided 220V power plug. Ensure the connection is secure.
- Plug the EU or AU plug into a compatible 220V AC power outlet.
- The light strip will illuminate by default once connected and the switch is turned on.

Step 3: Install the Strip Light
- Ensure the wall or surface where the strip will be installed is clean and dry.
- Secure the strip light using the provided mounting clips and screws at regular intervals to ensure stability.
- Avoid excessive bending of the strip light, especially at sharp angles, to prevent damage to the internal components.
- Prevent sharp objects from pressing against or scratching the LED beads.
4. Operating Instructions
The YEMEKE COB LED Strip Light is designed for straightforward operation. Once properly installed and connected to a 220V AC power source, use the integrated ON/OFF switch on the power plug to control the light.
- Turning On: Flip the switch to the 'ON' position. The strip light will illuminate.
- Turning Off: Flip the switch to the 'OFF' position. The strip light will turn off.
The light strip is 'Always On' when the switch is in the 'ON' position, providing continuous illumination.
5. Maintenance
- Gently wipe the LED strip with a dry cloth or a slightly damp soft cloth to remove dust. Do not use chemical cleaners, abrasive materials, or harsh solvents, as these can damage the strip.
- When not in use for extended periods, store the LED strip in a dry place, away from direct sunlight and extreme temperatures.
- Do not forcefully pull or coil the power cord. Handle the plug and cord with care to prevent damage.
- Regularly inspect the strip for any signs of damage, such as cuts, cracks, or loose connections. If damage is found, discontinue use and contact customer support.
6. Troubleshooting
- Light strip does not turn on:
- Check if the power plug is securely connected to both the strip and the wall outlet.
- Ensure the wall outlet has power. Test with another appliance.
- Verify the ON/OFF switch on the plug is in the 'ON' position.
- Light strip flickers or has uneven brightness:
- Check for any loose connections between the strip and the power plug.
- Ensure the strip is not excessively bent or damaged, which could affect LED performance.
- Light strip overheats:
- Immediately disconnect power.
- Ensure the light strip is fully unrolled and spread out. Never operate the strip while it is coiled or stacked, as this will cause severe overheating and damage.
- Ensure there is adequate ventilation around the strip.
- Portion of the strip is not lighting up:
- Inspect the non-lighting section for physical damage or cuts.
- If the damage is at a cutting mark, the section might be permanently affected.
7. Specifications
| Feature | Detail |
|---|---|
| Product | 220V COB LED Strip Light |
| Lamp Beads | COB (288 LEDs/meter) |
| Color Temperature | Warm White (3000K), Neutral White (4500K), Cold White (6000K) |
| Waterproof Rate | IP65 Waterproof |
| Working Voltage | AC220V (with EU/AU Switch Plug) |
| Cuttable Length | Every 50cm (with cutting mark) |
| Strip Size | W10 x H4mm |
| Color Rendering Index (CRI) | >= 85RA |
| Luminous Flux | 249-2000 lumens |
| Average Life | 30,000 hours |
| Power Source | AC |
| Power Consumption | 8.64W/m |
| Item Type | Strip |
| LED Chip Brand | Epistar |
| Occasion | Living room (suitable for various indoor/outdoor decorative lighting) |
| Certification | LVD, ROHS, CE |



8. User Tips
- Always Unroll Before Use: To prevent overheating and potential damage, always ensure the entire LED strip is unrolled and spread out before connecting it to a power source. Never operate the strip while it is coiled or stacked.
- Consider Your Lighting Needs: With three color temperature options (Warm White, Neutral White, Cold White), choose the one that best suits the ambiance you want to create. Warm White is ideal for cozy spaces, Cold White for task lighting, and Neutral White for general illumination.
- Plan Your Installation: Before securing the strip, lay it out to visualize the path and ensure it reaches your desired areas. Remember it can be cut every 50cm at designated marks for custom lengths.
9. Warranty and Support
For after-sales service, please contact official customer support and provide proof of purchase. A user manual in PDF format is available for download and can be accessed via this link: User Manual (PDF).