1. Introduction
The MESTEK WM710A is a non-destructive digital wood moisture tester designed to measure moisture content in various materials without causing damage. It features a large backlit LCD display, MAX/MIN value recording, self-calibration, and an alarm function for easy and accurate moisture detection. This manual provides detailed instructions for the safe and effective use of your WM710A moisture meter.
2. Safety Information
Please read and understand all safety instructions before operating the device to prevent injury or damage to the product.
- Do not use the product for purposes other than its intended use.
- Keep the product away from high temperature, high humidity, and strong vibration environments.
- Do not disassemble the product. Unauthorized disassembly will void the warranty and may cause malfunction.
- When measuring, keep your hands away from the measuring head, as the humidity of your hands may affect the measurement results.
- Ensure the product is stored in a stable environment to avoid accidental drops or impacts.
3. Product Overview and Features
The WM710A is a non-destructive moisture meter that uses a spherical humidity sensor to detect moisture content. Its non-contact design allows for quick and easy measurements without damaging the material surface.
Key Features:
- Non-destructive Measurement: Utilizes a spherical probe (diameter 25mm) for induction testing, measuring depth between 20-40mm.
- Easy to Read Display: Large backlit HD LCD screen with a color analog bar, numeric display, and icons for DRY, RISK, WET, HOLD, MAX, MIN, and battery indicator.
- Self-Calibration: Ensures accurate readings by allowing the user to calibrate the device.
- Data Hold: Freeze the current measurement on the display.
- MAX/MIN Record: Automatically detects and records the maximum and minimum moisture values within a test range, helping to locate the wettest and driest areas.
- Alarm Function: Provides an alert when moisture content reaches the "WET" range.
- Auto-Shutdown: Conserves battery life by automatically turning off after 30 minutes of inactivity.
- Low Power Indicator: Notifies the user when batteries need replacement.
- Value Display: Shows the current measured value.
4. Package Contents
Please check the package contents upon receipt to ensure all items are present:
- 1x MESTEK WM710A Digital Wood Moisture Tester
- 1x User Manual
- 1x Storage Bag
- 1x Screwdriver (for battery compartment)
- 1x Product Box
5. Setup
5.1 Battery Installation
The WM710A requires 3x 1.5V AAA batteries (not included). Follow these steps to install or replace batteries:
- Ensure the device is turned off.
- Locate the battery cover on the back of the product.
- Use the provided screwdriver to loosen the screw on the battery cover.
- Remove the battery cover.
- Insert three 1.5V AAA batteries, ensuring correct polarity (+/-).
- Replace the battery cover and tighten the screw.
6. Operation
6.1 Power On/Off
- To turn on: Press the Power button.
- To turn off: Press and hold the Power button. The device will also auto-shutdown after 30 minutes of inactivity.
6.2 Calibration
It is recommended to calibrate the device before first use and after significant environmental changes.
- Turn on the device.
- Hold the device in the air, ensuring the spherical sensor is 80-100mm away from any object or your hand.
- Press the MEAS button. The LCD will display "CAL" during calibration.
- After a few seconds, the LCD will show the current humidity level, indicating successful calibration. If calibration fails, turn off and restart the device, then repeat the process.
- Note: Consistent hand position during calibration and measurement is important as it can affect readings.
6.3 Taking a Measurement
- Ensure the device is calibrated.
- Place the spherical humidity sensor at a right angle to the surface of the material you wish to measure.
- The LCD will display the moisture content. The color analog bar will indicate the moisture status (DRY, RISK, WET).
6.4 MAX/MIN Value Record
The device can automatically detect and record the maximum and minimum moisture values.
- During measurement, press the MIN/MAX button to cycle through the current, maximum, and minimum recorded values.
- This feature is useful for identifying the wettest and driest spots in a test area.
6.5 Data Hold
- To hold the current measurement on the display, press the MEAS button briefly. "HOLD" will appear on the screen.
- Press MEAS again to exit hold mode and resume live measurement.
6.6 Alarm Function
- When the measured moisture content falls within the "WET" range, the device will emit an alarm sound.
- The default "WET" range is 51-100.
6.7 Adjusting RISK and WET Limit Values
You can customize the thresholds for "RISK" and "WET" indicators:
- Press the SET button. The "RISK" symbol will flash.
- Use the ▲ (up) or ▼ (down) keys to adjust the upper limit of the "RISK" range (default 50).
- Press SET again. The "WET" symbol will flash.
- Use the ▲ (up) or ▼ (down) keys to adjust the lower limit of the "WET" range (default 51).
- Press SET once more to confirm your selection and return to measurement mode.
7. User Tips
- For consistent readings, always ensure the spherical sensor is placed flat against the surface being measured.
- When measuring large areas, use the MAX/MIN function to quickly identify potential problem spots.
- Be aware that surface moisture (e.g., condensation) can temporarily affect readings. Wipe the surface dry before testing.
- If measuring different materials, consider their specific humidity ranges as provided in the "Humidity Comparison Table" to interpret results accurately.
8. Maintenance
- Cleaning: Wipe the device with a soft, dry cloth. Do not use abrasive cleaners or solvents.
- Storage: Store the product in a cool, dry place, away from direct sunlight, high temperatures, and high humidity (recommended storage environment: -10~50°C, 5%-95%RH).
- Battery Care: If the device will not be used for an extended period, remove the batteries to prevent leakage and damage.
9. Troubleshooting
- Inaccurate Readings:
- Ensure proper calibration.
- Keep hands away from the measuring head during measurement.
- If the environment changes suddenly (temperature/humidity), allow the device to stabilize before use.
- If readings fluctuate rapidly, place the meter on a rough surface or allow it to dry for a few minutes to stabilize.
- No Display/Device Not Turning On:
- Check battery installation and polarity.
- Replace batteries if the low power indicator is on or if they are old.
- Alarm Constantly On:
- Check the "WET" limit settings and adjust if necessary.
- Ensure the measuring surface is not excessively wet or has surface moisture.
10. Specifications
| Parameter | Value |
|---|---|
| Product Name | Non-destructive moisture meter |
| Measurement Range | 0-100 |
| Measured Depth | 20-40mm |
| Range of RISK Limit Value | 0-50 |
| Range of WET Limit Value | 51-100 |
| Automatic Shut-down | 30 minutes |
| Display | Color screen |
| Battery | 1.5V × 3 AAA |
| Operation Current | About 35mA |
| Operation Temperature | 0-40 °C |
| Operation Humidity | 0%-70%RH |
| Storage Environment | -10~50°C (5%-95%RH) |
| Dimension | 225*63*32mm |
| Weight | 200g (excluding batteries) |
| Building Material | Humidity Range (unit) | Humidity Status |
|---|---|---|
| Wood | < 50 | DRY |
| 50 - 80 | RISK | |
| > 80 | WET | |
| Cement | < 25 | DRY |
| 25 - 50 | RISK | |
| > 50 | WET | |
| Plaster | < 30 | DRY |
| 30 - 60 | RISK | |
| > 60 | WET |
11. Warranty and Support
MESTEK products are manufactured to high-quality standards. For warranty information, technical support, or service inquiries, please refer to the official MESTEK website or contact your local distributor. Keep your purchase receipt as proof of purchase.
A comprehensive user manual in PDF format is also available for download: WM710A User Manual (PDF).