LAUNCH CRP808

Contents

LAUNCH CRP808 OBD2 Scanner User Manual

Full System Diagnostic Scan Tool

1. Introduction

The LAUNCH CRP808 is a professional diagnostic tool designed for American, European, and Asian passenger vehicles. It offers comprehensive full system diagnosis, supporting not only four basic systems (Engine, Transmission, ABS, SRS) but also providing full diagnostic OBD2 scan functions. This tool boasts wide car model coverage, powerful test functions, accurate test data, and online diagnostics.

It supports system-wide basic diagnostic functions including Reading Diagnostic Trouble Codes (DTCs), Clearing DTCs, and Reading Data Stream, along with 5 common useful service and reset functions.

2. Product Overview

2.1 Key Features and Advantages

  • Full System Coverage: Supports engine, transmission, ABS, SRS, brake system, emission system, fuel system, light system, wiper system, and more for 56 mainstream vehicle brands (1992 and newer OBD II).
  • Special Functions: Includes ABS Bleeding, Injector Coding, Throttle Adaptation, TPMS Reset, and DPF Regeneration.
  • Extensive DTC Database: Built-in over 3000 generic error code definitions to quickly identify car problems.
  • OBD1 & OBD2 Support: Compatible with both OBD2 and OBD1 connector cars (note: CRP808 only comes with an OBD2 connector cable).
  • User-Friendly Design: Features a 5-inch IPS touchscreen, Android system, A5 quad-core processor, and 8GB ROM for high-speed diagnostics and feedback.
  • Convenient One-Click Operations: Includes one-click online update, I/M readiness check, screenshot, VIN identification, and diagnostic report generation/sharing.
  • Multi-Language Support: Available in English, French, Spanish, Russian, Japanese, German, Italian, Portuguese, and Korean.
  • No Registration Required: Can be used immediately without complex registration steps.
  • Battery: 4000mAh built-in rechargeable Li-battery.

2.2 Package Contents

The CRP808 package includes the following items:

  • CRP808 Handset
  • OBD II Diagnostic Cable
  • DC 5V Charging Cable
  • User Manual
  • Padded Carrying Case
LAUNCH CRP808 package contents including the diagnostic tool, OBD II cable, charging cable, user manual, and carrying case.
Figure 2.2.1: LAUNCH CRP808 Package Contents

2.3 Product Visuals

Front view of the LAUNCH CRP808 diagnostic tool showing its 5-inch screen and control buttons.
Figure 2.3.1: LAUNCH CRP808 Diagnostic Tool
Video 2.3.1: Unboxing and Overview of the CRP808

3. Setup

  1. Connect to Vehicle: Locate the vehicle's OBD-II port (typically under the dashboard) and connect the provided OBD II diagnostic cable to it and to the CRP808 handset.
  2. Power On: The device will power on automatically once connected to the vehicle's OBD-II port, or you can press the power button if using external power.
  3. Initial Configuration: Upon first use, the device will guide you through initial setup steps. This includes selecting your preferred language, setting the timezone, and configuring network settings (Wi-Fi).
  4. Screenshots showing initial setup steps for the CRP808, including language selection, timezone setting, and network configuration.
    Figure 3.1: Initial Setup Screens
  5. No Registration: The CRP808 can be used without any complex registration steps.

4. Operation

4.1 Basic Diagnostic Functions

After connecting the CRP808 to your vehicle, navigate the main menu using the touchscreen or physical buttons:

  • Diagnose: Select this option to perform a full system scan. The tool will automatically detect the vehicle's information and scan all available systems.
  • Read DTC: Retrieves Diagnostic Trouble Codes (DTCs) from the vehicle's control modules.
  • Clear DTC: Erases DTCs from the vehicle's control modules after repairs have been made.
  • Read Data Stream: Displays live data parameters from the vehicle's sensors and modules in real-time.
Screenshots of the CRP808 interface showing diagnostic options like Diagnose, OBD II, Reset, Upgrade, Data, and Settings.
Figure 4.1.1: Main Diagnostic Interface

4.2 Special Service and Reset Functions

The CRP808 supports 5 common useful service and reset functions:

  • ABS Bleeding: Performs various bi-directional tests to check the operating conditions of the Anti-lock Braking System (ABS).
  • Injector Coding: Codes new injector numbers to the ECU/PCM after replacement.
  • Throttle Adaptation: Initializes the throttle actuators to the default state for regulating throttle (or idle engine) operations accurately.
  • TPMS Reset: Resets the Tire Pressure Monitoring System (TPMS) after tire rotation, sensor replacement, or other maintenance.
  • DPF Regeneration: Manages Diesel Particulate Filter (DPF) regeneration to clear blockages.
Diagram illustrating various full system diagnostic and special functions icons including ABS Bleeding, Oil Reset, Elec Throttle Lrn, BAT Reset, TPMS Reset, Injector, and DPF REG.
Figure 4.2.1: Special Functions Overview

4.3 Convenient Button Functions

  • One-Click Update: Connect to Wi-Fi and use the dedicated button for online software updates.
  • I/M Readiness: Quickly check the readiness status of emission-related monitors.
  • Screenshot: Capture screen images for documentation.
  • VIN Identify: Automatically identify the vehicle's VIN (Vehicle Identification Number).
  • Diagnostic Report: Generate a comprehensive diagnostic report and share it to a PC via email.
Image highlighting the convenient buttons on the CRP808, such as the one-click update, I/M readiness, and VIN identification, along with a description of its 5-inch touch screen and 4000mAh battery.
Figure 4.3.1: Convenient Button Functions

4.4 Supported Vehicle Brands (1992 - Present)

The CRP808 supports a wide range of vehicle brands, including but not limited to:

  • Acura
  • Alfa Romeo
  • Audi
  • BMW
  • Bugatti
  • Buick
  • Cadillac
  • Chevrolet
  • Chrysler
  • Citroen
  • Dacia
  • Daewoo
  • Dodge
  • Fiat
  • Ford (EU & AU)
  • GM
  • Gmsa
  • Holden
  • Honda
  • Hyundai
  • Infiniti
  • Isuzu
  • Jaguar
  • Jeep
  • Kia
  • Lancia
  • Land Rover
  • Lexus
  • Lincoln
  • Mazda
  • Mercedes-Benz
  • Mini
  • Mitsubishi
  • Nissan
  • Opel
  • Peugeot
  • Porsche
  • Renault
  • Saab
  • Samsung
  • Seat
  • Skoda
  • Smart
  • Sprinter
  • Subaru
  • Suzuki
  • Toyota
  • Vauxhall
  • Volkswagen (VW)
  • Volvo
Screenshots of the CRP808 displaying lists of supported car brands for diagnostic functions, categorized alphabetically.
Figure 4.4.1: Supported Car Brands Interface

5. Maintenance

  • Software Updates: Keep your CRP808 software updated to ensure compatibility with the latest vehicle models and access new features. The device offers one year of free online updates.
  • Battery Care: The device has a built-in 4000mAh rechargeable Li-battery. Ensure it is charged regularly to maintain optimal performance. Avoid fully discharging the battery for extended periods.
  • Cleaning: Use a soft, dry cloth to clean the device. Avoid using harsh chemicals or abrasive materials that could damage the screen or casing.
  • Storage: Store the device in its padded carrying case in a cool, dry place when not in use to protect it from dust and physical damage.

6. Troubleshooting

If you encounter issues with your CRP808, consider the following general troubleshooting steps:

  • Connection Issues: Ensure the OBD II diagnostic cable is securely connected to both the vehicle's OBD-II port and the CRP808 handset.
  • Power Issues: Verify the device is adequately charged or receiving power from the vehicle.
  • Software Glitches: Restart the device. If the problem persists, check for available software updates.
  • Error Codes: Refer to the device's built-in database of over 3000 generic error code definitions for explanations of DTCs.
  • Consult Manual: For more detailed troubleshooting specific to certain functions or vehicle models, refer to the comprehensive user manual (PDF) available for download.

7. Specifications

Feature Specification
System Android 7.0
Processor A5 Quad-core
ROM 8GB
Battery 4000mAh rechargeable Li-battery
Display 5-inch IPS Touch Screen
Display Resolution 1280x720
Communication Interface OBD-II
Input Voltage 9~18V (OBD II interface) / 5V (DC)
Storage Temperature -20°C ~ 70°C
Working Temperature -10°C ~ 50°C
Dimensions (L x W x H) 248.7 x 93.5 x 36 mm (9.4 x 3.7 x 1.5 inches)
Item Weight 1.5 kg
Wireless Function No
Software Update 1 year free online update
Certification CE
Technical parameters of the CRP808, including battery, system, screen resolution, display type, input voltage, storage temperature, and size.
Figure 7.1: Detailed Technical Parameters

8. User Tips

No specific user tips were available from provided reviews or Q&A content. However, general advice for diagnostic tools includes:

  • Always ensure your vehicle's ignition is on (but engine off) when performing diagnostics, unless otherwise specified by the tool or vehicle manufacturer.
  • Keep the device's software updated to ensure compatibility with the latest vehicle models and to benefit from new features and bug fixes.
  • When clearing DTCs, ensure that the underlying issue has been resolved to prevent the codes from reappearing.

9. Warranty & Support

The LAUNCH CRP808 comes with a 1-year warranty and 1 year of free online software updates, ensuring your device remains current and functional.

For further assistance, detailed instructions, or specific technical queries, please refer to the comprehensive user manual. A PDF version of the user manual is available for download at: User Manual (PDF).

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.