Kailh Ice Cream Magnetic Linear Switch

Contents

Kailh Ice Cream Magnetic Linear Switch User Manual

Model: Ice Cream Magnetic Linear Switch

1. Introduction

Thank you for choosing the Kailh Ice Cream Magnetic Linear Switch. These switches are designed for mechanical keyboards, offering a unique magnetic linear feel, high precision, and durability for both gaming and office use. This manual provides essential information for the safe and effective use of your switches.

Kailh Ice Cream Magnetic Linear Switch
Figure 1: Kailh Ice Cream Magnetic Linear Switch

A close-up view of the Kailh Ice Cream Magnetic Linear Switch, showcasing its light-colored housing and stem.

2. Safety Information

Please read the following safety information carefully before installation and use:

Safety Information Diagram for Kailh Switches
Figure 2: Safety Information and Technical Diagram

This diagram illustrates the dimensions of the switch and recommended PCB layout, along with key electrical and mechanical specifications.

  • Low Voltage Device: These switches operate at low voltage (Below 50Vac or 75Vdc).
  • Electrical Specifications: Ensure your keyboard's PCB is compatible with the switch's electrical ratings.
  • Installation: Avoid excessive force during installation to prevent damage to the PCB or the switch shaft.
  • Material: The switches are made of plastic. Do not expose to extreme heat or corrosive substances.
  • Certification: Product is RoHS and CE certified.

3. Setup and Installation

The Kailh Ice Cream Magnetic Linear Switches are designed for easy installation into compatible mechanical keyboard PCBs.

  1. Preparation: Ensure your keyboard PCB is clean and free of debris.
  2. Switch Orientation: Align the pins of the switch with the corresponding holes on the PCB. The switch housing usually has a notch or specific shape to guide correct orientation.
  3. Installation: Gently press the switch into the PCB until it clicks into place.
  4. Lubrication: These switches are factory lubricated and can be used directly out of the box, providing a smooth feel.
  5. Caution: Avoid excessive force during installation to prevent damage to the PCB or the switch shaft. If a switch does not fit easily, recheck its orientation and the PCB holes.

4. Operation and Features

The Kailh Ice Cream Magnetic Linear Switch offers a unique typing experience with advanced features:

  • Magnetic Linear Feel: Provides a smooth and consistent keystroke without tactile bumps or audible clicks.
  • BOX Circular Shaft Core: Inherits a classic design for stable performance and durability.
  • Sealed Bottom Shell Design: Enhances waterproof and dustproof capabilities, contributing to a longer lifespan and consistent sound.
  • Micrometer-Level Precision Adjustment: Supports RT0.005mm precision, allowing for highly accurate response whether for continuous key presses, half-key triggers, or micro-position shifts.
  • High-Quality Materials: Features POM top and bottom covers, a POK BOX circular shaft core, and an N52 rare earth magnet for optimal performance and stability.
  • Long Spring Rebound: Equipped with a 20mm spring for a strong and responsive rebound.
Micrometer-Level Precision Adjustment
Figure 3: Precision Adjustment Capability

An illustration demonstrating the switch's capability for micrometer-level precision adjustment, supporting RT0.005mm.

5. Maintenance

To ensure the longevity and optimal performance of your Kailh Ice Cream Magnetic Linear Switches:

  • Dust Prevention: Keep your keyboard clean and free from dust and debris. Use a dust cover when the keyboard is not in use.
  • Cleaning: For general cleaning, use compressed air to blow out any particles between the keycaps and switches. For deeper cleaning, carefully remove keycaps and use a soft brush or cotton swab lightly dampened with isopropyl alcohol to clean around the switch housing.
  • Avoid Liquids: Do not spill liquids directly onto the switches or keyboard. The sealed bottom shell design offers some protection, but it is not fully waterproof.
  • Avoid Disassembly: Do not attempt to disassemble the switches unless you are experienced in switch modification, as this may damage the internal components.

6. Troubleshooting

If you encounter issues with your switches, consider the following:

  • Switch Not Registering:
    1. Ensure the switch is fully seated in the PCB.
    2. Check for any bent pins on the switch before installation.
    3. Test the switch in another slot on the PCB if possible, or test another switch in the problematic slot to isolate the issue to the switch or the PCB.
  • Inconsistent Feel:
    1. Ensure no foreign objects (dust, hair) are lodged within the switch housing.
    2. Verify that the keycap is properly installed and not interfering with the switch stem.
  • Key Chatter (Multiple Inputs): This is rare but can occur. Ensure the switch is properly seated. If the issue persists with a specific switch, it may need replacement.

For persistent issues, please contact your seller for further assistance.

7. Specifications

FeatureSpecification
Switch TypeMagnetic Linear Switch
Model NumberIce Cream Switch
MaterialPlastic (POM, POK)
CertificationRoHS, CE
EU LVD VoltageBelow 50Vac or 75Vdc
Rating12V DC, 10mA
Contact Resistance200mΩ Max
Insulation Resistance100MΩ Min (DC100V)
Withstand VoltageAC100V (50-60Hz) for 1 minute
Operation Force43 ± 10gf
Initial Force35 ± 5gf (at 0.3mm position)
Return Force15gf min
Conduction Travel1.3 ± 0.30mm
Total Travel2.8 ± 0.25mm (Physical) / 3.4 ± 0.2mm (Magnetic)
Operation Life50,000,000 Cycles (Electrical) / 100,000,000+ Cycles (Mechanical)
Force-Travel Diagram and Product Parameters
Figure 4: Force-Travel Diagram and Detailed Parameters

This graph illustrates the force required versus the travel distance of the switch, alongside key operational specifications.

8. User Tips

Based on general usage of mechanical keyboard switches:

  • Keycap Compatibility: Ensure your keycaps are compatible with standard MX-style stems for a secure fit.
  • Hot-Swap Boards: If using a hot-swappable PCB, ensure the switch pins are straight before insertion to avoid bending or damaging the sockets.
  • Typing Feel: Allow for a short break-in period as the switches may feel slightly smoother after initial use.

No specific user tips were available from provided buyer reviews or Q&A content.

9. Warranty and Support

For warranty information, technical support, or any product-related inquiries, please contact the seller or the official Kailh support channels. Keep your proof of purchase for warranty claims.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.