WINLINTE 13711342366

Contents

WINLINTE Fuel Injector System

Model: 13711342366 / 0280155788

Safety Instructions

Always prioritize safety. Professional installation is highly recommended.

  1. Park the vehicle on a flat, stable ground, apply the parking brake, and turn off the engine completely. For all electrical parts, disconnect the vehicle battery negative terminal first to avoid short circuit or electric shock.
  2. Remove the original old or damaged part in reverse order of factory installation, using proper matching tools. Do not force dismantle to avoid damaging surrounding parts.
  3. Clean the installation area thoroughly, check for wear, rust or damage of mounting brackets and related parts, and ensure the mounting surface is flat and clean.
  4. Align the new auto part with the original mounting position, fix it firmly with standard fasteners (screws, bolts, clips), and ensure no looseness or deviation.
  5. Reconnect all wiring harnesses, hoses or connectors correctly. For electrical parts, reconnect the battery after confirming all connections are correct.
  6. Start the vehicle, test the function of the new part, check for abnormal noise, leakage or malfunction, and confirm normal operation before use.
  7. Tools Required: Standard wrench set, screwdriver, jack, safety gloves, voltage tester (for electrical parts).

Product Overview

Fuel Injectors are critical components in your vehicle's engine, responsible for atomizing and delivering fuel into the combustion chamber. This set includes 4 high-grade metal and plastic composite fuel injectors designed for optimal performance and durability. These injectors are compatible with various BMW R-series motorcycle models and are direct replacements for part numbers 13711342366, 0280155788, EV-6-C, and AW330661.

Video Description: A visual overview of the WINLINTE Fuel Injectors, showcasing the product from various angles and highlighting its design and components. This helps in identifying the correct part before installation.

Setup and Installation Guide

Follow these steps carefully for proper installation of your new fuel injectors.

  1. Preparations & Pressure Relief:
    • Disconnect the battery negative terminal.
    • Remove the fuel pump fuse/relay.
    • Start the engine and let it run until it stalls to relieve fuel pressure from the system.
    • Clean the intake manifold and fuel rail mounting surfaces thoroughly, removing any dirt or carbon deposits.
  2. Install New O-Rings:
    • Lightly lubricate the new O-rings with clean engine oil or fuel lube.
    • Carefully fit the O-rings into the injector grooves, ensuring they are not twisted or damaged.
  3. Install Injector:
    • Align each injector vertically and insert it into the fuel rail until it clicks into place, indicating it is fully seated.
    • Install the fuel rail assembly, ensuring all injectors are properly aligned with their respective intake ports.
    • Tighten the fuel rail bolts crosswise (starting from the middle and working towards the ends) to the vehicle manufacturer's specified torque.
  4. Reconnect & Test:
    • Attach all electrical connectors to the injectors, ensuring they click to lock securely.
    • Reinstall the fuel line, fuel pump fuse/relay, and reconnect the battery.
    • Prime the fuel system: Turn the ignition ON for 5 seconds, then OFF. Repeat this cycle three times.
    • Start the engine.
    • Carefully check for any fuel leaks around the injectors and fuel lines.
    • Ensure the engine idles smoothly without any misfires.
Close-up of a single fuel injector with labels

Image Description: A detailed view of a single fuel injector (Part Number 0280155788). Label 1 points to the fuel nozzle/tip, which sprays fuel into the engine. Label 2 points to the electrical connector, which receives signals from the engine control unit (ECU) to operate the injector.

Set of four WINLINTE fuel injectors

Image Description: A set of four WINLINTE fuel injectors, showing their overall appearance and identical design. This image helps confirm you have the complete set and the correct type of injector.

Operation

Once correctly installed, the fuel injectors operate automatically as part of your engine's fuel management system. They precisely deliver fuel based on engine demands, ensuring efficient combustion and optimal engine performance. No manual operation is required after installation.

Maintenance

To ensure the longevity and optimal performance of your fuel injectors, consider the following:

  • Fuel Quality: Always use high-quality fuel to prevent the buildup of deposits that can clog injectors.
  • Leak Inspection: Regularly check for any signs of fuel leaks around the injector seals and fuel lines. Address any leaks immediately.
  • Electrical Connections: Inspect the electrical connectors for corrosion, looseness, or damage. Ensure they are clean and securely attached.
  • Professional Cleaning: Consider professional fuel system cleaning at recommended service intervals to maintain injector efficiency.

Troubleshooting

If you experience issues after installation, refer to the table below for common symptoms and solutions.

SymptomPossible CauseSolution
Engine misfires, rough idleClogged or faulty injector, poor electrical connectionCheck electrical connections, ensure O-rings are seated correctly, consider injector cleaning or replacement if fault persists.
Fuel smell, visible leaksDamaged or improperly seated O-rings, loose fuel rail boltsInspect and replace O-rings, re-tighten fuel rail bolts to specified torque.
Reduced fuel economyLeaking or inefficient injectorProfessional diagnosis is recommended; potential injector replacement.
Difficulty starting engineInsufficient fuel pressure (due to leaking injector) or faulty injectorCheck for leaks, ensure proper fuel pressure, diagnose individual injectors.

Specifications

FeatureDetail
Part Numbers13711342366, 0280155788, EV-6-C, AW330661
MaterialHigh-Grade Metal & Plastic Composite
OriginMainland China
Compatibility
  • BMW R1100 GS / RT / RS (1994-2001, 1.1L Boxer Engine)
  • BMW R1150 GS / RT / RS (1999-2005, 1.13L Boxer Engine)
  • BMW R1200 GS / RT / RS (2004-2015, 1.17L Boxer Engine)

User Tips

No specific user tips are available from customer feedback at this time. Always ensure proper torque specifications are followed during installation to prevent leaks and ensure a secure fit. Double-check all connections before starting the engine.

Warranty and Support

Warranty Terms

Your WINLINTE Fuel Injectors come with a 12-month warranty period from the date of purchase. This warranty covers manufacturing defects only. It does NOT cover damage caused by improper installation, misuse, accident, normal wear and tear, unauthorized modification, or failure to follow the instructions provided in this manual.

For warranty claims, please contact the seller via AliExpress store customer service. You will need to provide your order number, product photos, and a detailed description of the fault.

Customer Support

For any assistance, technical questions, or support regarding your fuel injectors, please contact customer support via WhatsApp: +86 13600173478. When contacting support, please provide your order number, vehicle model, and any relevant product photos or videos to help us resolve your issue efficiently.

For additional detailed information and diagrams, please refer to the official user manual available in PDF format.

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.