KALADA Symphony Car Ambient Light

Contents

Symphony Car Ambient Light

Model: Symphony Car Ambient Light | Brand: KALADA

Introduction

This manual provides detailed instructions for the installation, operation, and troubleshooting of your Symphony Car Ambient Light RGBIC LED Strip. Please read this manual thoroughly before use to ensure proper function and safety.

Safety & Warnings

Important Safety Information:

  • Read all instructions before use. Failure to follow these instructions may result in damage to the product or personal injury.
  • Keep the device and its cord out of reach of children under 3 years old.
  • Keep away from children unless supervised by an adult.
  • Do not use this product for purposes other than its intended use.
  • Inspect the product before each use; do not use if damaged.
  • Follow installation and operation guidelines to avoid injury.

Package Contents

The complete kit includes the following components. Please verify all items are present before installation.

Symphony 18-in-1 (110cm version)

  • 1x Main Controller Module
  • 4x Sub-Controller Modules
  • 1x 110cm LED Strip
  • 4x 75cm LED Strips
  • 1x 35cm LED Strip
  • 4x Footlights
  • 4x Door Bowl Lights
  • 4x Storage Lights
  • 1x Host Power Cord/Button
  • 2x Adhesive Tape
  • 1x Rocker
  • 2x Extension Cables

Symphony 18-in-1 (90cm version)

  • 1x Main Controller Module
  • 4x Sub-Controller Modules
  • 1x 90cm LED Strip
  • 4x 75cm LED Strips
  • 1x 25cm LED Strip
  • 4x Footlights
  • 4x Door Bowl Lights
  • 4x Storage Lights
  • 1x Host Power Cord/Button
  • 2x Adhesive Tape
  • 1x Rocker
  • 2x Extension Cables
Kit contents for Automotive LED Phantom Atmosphere Light
Figure 1: Overview of the product kit components, including controllers, LED strips, and various lights.

Specifications

Attribute Value
Brand Name KALADA
Item Type Atmosphere lamp
Voltage 12 V
Origin Mainland China
High-concerned chemical None
Package Weight 0.12 kg
Package Dimensions (L x W x H) 10cm x 10cm x 10cm

Installation

The entire equipment consists of one main controller and four sub-controllers. Each controller can connect several lights.

1. Pre-Installation Test

Before permanent installation, it is highly recommended to test the complete kit. Connect all components to a 12V power supply (suggested current 5A-15A) and confirm that all lights and controllers function normally.

2. Component Placement

The main controller is typically installed on the center console, connecting to the center console light strip, instrument handle lamp lights, etc. The four sub-controllers are installed in each of the four car doors, connecting to the door light strip, handle light, storage box light, etc.

Installation diagram showing placement of main and sub controllers in a car interior.
Figure 2: Recommended installation locations for the main and sub-controllers.
Diagram showing various car interior lighting zones: footwell, center console, contour, handle, saddle, and storage lights.
Figure 3: Diagram illustrating various installation locations for the ambient lights within the car interior.

3. Wiring Instructions

  • Main Controller: The red wire connects to the ACC power or cigarette lighter fuse (positive polarity, requiring 5A-15A current). The black wire connects to any ground metal.
  • Sub-Controllers: Connect to the door constant power supply.
  • LED Strips: The LED strips can be cut to length, but avoid cutting into the lamp beads. Cut sections are not available for use.
Diagram showing how LED strips can be cut and wiring connections for main and door modules.
Figure 4: Instructions for cutting LED strips and wiring connections for the main and door modules.

Note:

  • The main controller can work individually.
  • Sub-controllers cannot work without the main controller being powered on. To test a sub-controller, ensure the main controller is powered with 12V, then supply 12V to the sub-controller.
  • The light strip or sub-controller needs to be used with the main controller; it will not work without our controller.

App Control

1. App Download

Search for 'LED LAMP' in your app store or scan the QR code provided on the main control box or in the installation diagram (Figure 2) to download and install the mobile control app. Enable Bluetooth function on your mobile phone and allow all related access permissions.

2. Bluetooth Connection

Turn on your phone's Bluetooth. The app will automatically scan for nearby equipment. Click on the device icon to enter the main control interface. If the app cannot connect, ensure Bluetooth is enabled and no other device is connected.

App screenshot showing Bluetooth device connection status.
Figure 5: App interface showing Bluetooth device connection.

3. App Functions

The app provides comprehensive control over your ambient lighting:

  • Color Disc & Color Ring: Select from a wide spectrum of colors.
  • Brightness Adjust: Control the intensity of the lights.
  • Common Colors & DIY Common Colors: Choose from preset colors or create your own custom colors.
  • Static Color: Display a single, steady color.
  • Dynamic Streamer: Enjoy flowing, multi-color effects.
  • Music Mode: Lights synchronize with music.
  • DIY Mode: Customize your own lighting patterns.
Mobile app control interface for the ambient lights, showing various modes like Home page, Multiple modes, Custom, Music Mode, and Audio Mode.
Figure 6: Mobile app control interface for selecting colors and modes.
Video 1: Demonstration of color changing and dynamic effects controlled via the mobile app.

Button Operation

The main controller is externally connected with dual control buttons:

  • 'M' Button: Controls the illusion light.
  • 'S' Button: Controls the RGB light.
  • Long Press: Turn off the lights.
  • Short Press: Switch modes or turn on the lights.

Note: Other functions such as speed and brightness can only be adjusted using the app.

Troubleshooting

Q: The app cannot be connected or controlled.
A: Please check whether the Bluetooth function of your phone is turned on and whether the device is being connected to another phone. You can restart the app or restart the device for compensation testing.
Q: The LED light strips are flickering or not working.
A: You need to connect the controller to a power source with a current of less than 20A. It cannot be connected directly to the car's battery. If the power supply current exceeds 20A, the ambient light will not work and may damage the controller, causing overheating or melting. Please connect to the car's ACC.
Image showing LED strips with dead pixels due to incorrect voltage/current settings.
Figure 7: Incorrect voltage and current can lead to dead pixels and malfunction.
Image showing LED strips working properly with correct voltage/current settings.
Figure 8: Using the correct voltage and current ensures proper operation.
Q: The light strip only lights up halfway, and the end is not lit.
A: Please set the number of points to 125 in the app. The light strip will then work normally.
App screenshot showing the setting for the number of points, set to 125.
Figure 9: Adjusting the 'number of points' setting in the app to 125 to ensure full illumination of the light strip.

User Tips

  • Plan Your Layout: Before applying any adhesive or making permanent connections, plan the exact placement of all light strips and controllers to ensure optimal aesthetic and functionality.
  • Secure All Wiring: Use cable ties or clips to secure all wiring neatly and prevent interference with vehicle operations or accidental damage.
  • Test Thoroughly: Always perform a full system test after installation and before reassembling any interior panels to ensure all lights and app controls are working as expected.
  • Power Source: Ensure your power connection is stable and within the specified voltage and current limits to prevent damage to the LED system and your vehicle.

Warranty & Support

For detailed product information, including safety and regulatory compliance, please refer to the official user manual PDF available at User manual (PDF). This document contains comprehensive information to ensure accurate, complete, and legally compliant usage.

For any further assistance or inquiries, please contact the seller or refer to the product listing for support contact details.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.