1. Product Overview
The KeKeQeen 392 and 382 series square fuses are high-quality electronic components designed for industrial control equipment, portable devices, and precision electronic products. These fuses feature a small size, stable performance, easy installation, and low power consumption, ensuring efficient and safe operation within compatible circuits.
Video: Overview of KeKeQeen 392 and 382 square fuses.
2. Safety Information & Precautions
2.1 General Safety
- Never operate with wet hands to prevent electric shock.
- Do not exceed the rated load capacity of the circuit the fuse is protecting to avoid overheating.
- Keep out of children's reach to prevent accidental insertion or ingestion.
- Modification or disassembly of the fuse is strictly prohibited.
2.2 Environmental Precautions
- Do not place the fuse or the device it protects in damp or high-temperature environments.
3. Setup and Installation
These fuses are designed for integration into electrical circuits to protect against overcurrent. Installation typically involves replacing an existing fuse or incorporating it into a new circuit design.
- Identify the Correct Fuse: Ensure the replacement fuse matches the original fuse's type (392 or 382 series), voltage rating (250V), and current rating (e.g., T3.15A).
- Power Off: Always disconnect power to the device or circuit before attempting to install or replace a fuse.
- Locate Fuse Holder: Identify the fuse holder within the device or circuit board.
- Remove Old Fuse (if applicable): Carefully remove the old fuse from its holder.
- Insert New Fuse: Align the pins of the new square fuse with the corresponding slots in the fuse holder. Gently push the fuse into place until it is securely seated.
- Verify Connection: Ensure the fuse is firmly connected and not loose.
- Restore Power: Once the fuse is installed, restore power to the device or circuit and confirm normal operation.
Image: Fuse dimensions (3.5mm pin length, 4.3mm pin spacing).
4. Operating Instructions
Fuses are passive safety devices. They do not require active operation. Their function is to protect electrical circuits from overcurrent by melting and breaking the circuit when the current exceeds their rated capacity. This prevents damage to sensitive components and reduces the risk of fire.
5. Maintenance
KeKeQeen square fuses are maintenance-free components. They are designed for single-use protection. If a fuse blows, it indicates an overcurrent event has occurred in the circuit it protects. The blown fuse must be replaced with a new fuse of the identical type, voltage, and current rating.
6. Troubleshooting
- Device Does Not Operate: If the device protected by the fuse fails to power on or operate, first verify that the main power supply is properly connected. Then, inspect the fuse. A blown fuse will typically show a broken wire or darkened glass/body. Replace the fuse if it is blown.
- Fuse Blows Immediately After Replacement: If a new fuse blows immediately after installation, it indicates a persistent short circuit or severe overload in the protected device. Discontinue use and consult a qualified technician.
- Severe Heating Occurs: If the fuse or surrounding components exhibit severe heating, immediately disconnect power. This could indicate an undersized fuse for the application or another fault within the circuit. Do not continue use until the cause is identified and resolved.
7. Specifications
| Feature | Specification |
|---|---|
| Brand Name | KeKeQeen |
| Model Type | 392 Series, 382 Series Square Fuse |
| Breaking Capacity | SLOW FUSE |
| Voltage Rating | 250V |
| Current Ratings Available | T0.5A, T1A, T1.25A, T1.6A, T2A, T2.5A, T3.15A, T4A, T5A, T6.3A, T8A, T10A |
| Pin Length | 3.5mm |
| Pin Spacing | 4.3mm |
| Safety Standards | RoSH Compliant |
| Certifications | CE Certified |
| Use | Electrical Equipment |
| EU LVD Voltage | High voltage: Above 50Vac or 75Vdc |
| Battery Included | No |
| High-Concerned Chemicals | None |
| Origin | Mainland China |
| Package Dimensions (approx. for 100 pcs) | 20cm (L) x 20cm (W) x 5cm (H) |
| Package Weight (approx. for 100 pcs) | 0.1 kg |
8. User Tips
No specific user tips were available from customer reviews or Q&A for this product.
9. Warranty & Support
For warranty information, please refer to the terms provided by your point of purchase or contact the seller directly.
Manufacturer Information:
- Manufacturer: Shenzhen KeShengNuo technology co., ltd
- EU Authorized Representative: E-CrossStu GmbH, Mainzer Landstr.69, Frankfurt am Main, 49-69332967674 Germany