Electric Bike 14-inch Foldable Commuter Ebike

Contents

14-inch Foldable Commuter Electric Bike User Manual

Your guide to safe and enjoyable riding.

1. Safety Information

Please read this manual carefully before operating your electric bike. Failure to follow instructions and safety warnings may result in serious injury or damage to the product.

1.1 General Safety Guidelines

  • Always wear a helmet and appropriate safety gear while riding.
  • Ensure all components are securely fastened before each ride.
  • Do not ride under the influence of alcohol or drugs.
  • Familiarize yourself with local traffic laws and regulations.
  • Perform regular maintenance checks as described in this manual.

1.2 New York Traffic Notice

In New York State, you cannot use this device on sidewalks or on highways with speed limits over 20 mph. Consult with local laws, ordinances, orders, rules, and regulations for use in other conditions. Always yield to pedestrians, and follow traffic laws.

New York Traffic Notice on e-bike frame

Image: Close-up of a sticker on the e-bike frame detailing New York traffic regulations for electric bikes.

2. Setup and Assembly

Your electric bike comes 90% pre-assembled. The following steps detail the final assembly process. All necessary tools are included.

2.1 Assembly Video Guide

Video: A step-by-step guide demonstrating the assembly of the electric bike.

2.2 Step-by-Step Assembly Instructions

  1. Unboxing and Unfolding: Carefully remove the bike and all components from the packaging. Unfold the bike frame and secure the folding mechanism.
  2. Handlebar Adjustment: Insert the handlebar post into the frame. Ensure the crevice on the top of the handlepost is aligned with the front fender mounting point. Tighten the bolts using the provided wrench and Allen key. Secure the quick-release lever.
  3. Attach Bell and Brake Lever: Position the bell and brake lever on the handlebar. Use a screwdriver to tighten them securely.
  4. Front Wheel Axle Assembly: Assemble the front wheel axle components (bolts, washers, and quick-release skewer).
  5. Mount Front Wheel: Carefully align the front wheel with the fork. Insert the assembled axle through the wheel hub and fork dropouts. Secure with washers and nuts, ensuring the brake mechanism is correctly aligned.
  6. Attach Front Fender: Mount the front fender to the fork using the provided bolts and Allen key. Ensure it is centered over the wheel.
  7. Seat Post and Saddle Installation: Insert the seat post with the saddle into the frame. Adjust the height to your comfort and secure it with the quick-release clamp.
  8. Pedal Installation: Identify the 'R' (Right) and 'L' (Left) markings on the pedals and crank arms. Screw the right pedal clockwise into the right crank arm and the left pedal counter-clockwise into the left crank arm. Tighten with a wrench.
  9. Attach Rear Fender: Mount the rear fender to the bike frame using the provided hardware.
  10. Install Reflectors: Attach the orange side reflectors to the wheels and the red rear reflector to the seat post or rear frame. Attach the white front reflector to the handlebar.

3. Operating Instructions

3.1 Powering On/Off

  • To power on the bike, insert the key into the ignition on the handlebar and turn it to the 'ON' position.
  • To power off, turn the key to the 'OFF' position and remove it.

3.2 Riding Modes

Your electric bike features three intuitive riding modes to adapt to various conditions:

  • Pedal Assist Mode: Provides motor assistance as you pedal, extending your range and making rides easier.
  • Throttle Mode: Allows you to propel the bike using the throttle without pedaling, similar to a scooter.
  • Normal Bicycle Mode: Ride the bike like a traditional bicycle without any motor assistance.
Person riding e-bike, illustrating three riding modes and two speed levels.

Image: Visual representation of the three riding modes (Pedal Assist, Throttle, Normal Bicycle) and two speed levels.

3.3 Speed Levels

The bike offers two speed levels for both Throttle and Pedal Assist modes:

  • Level 1 (Default): Standard speed for general riding.
  • Level 2 (High-Speed Mode): Max speed up to 22 mph, with memory function.

To switch to high-speed mode: While stationary, squeeze the brake lever and quickly twist the throttle twice. The display will indicate the current speed level.

3.4 Lighting System

Your e-bike is equipped with a smart auto-activated lighting system for enhanced safety:

  • Headlight: Features a built-in ambient light sensor that automatically turns on in low-light conditions.
  • Rear Brake Light: Automatically activates when the brakes are applied.
Close-up of the e-bike's smart auto-activated headlight and rear brake light.

Image: The smart auto-activated lighting system, showing the bright front light and red rear brake light.

4. Maintenance

4.1 Battery Charging

The 36V 7.8Ah lithium battery provides reliable power. It features built-in overcharge/over-discharge protection for long service life. Charging takes approximately 3-4 hours.

  1. Locate the charging port on the battery pack.
  2. Open the protective cover of the charging port.
  3. Connect the charger to a power outlet, then connect the charging cable to the bike's charging port.
  4. The charger indicator light will turn red during charging and green when fully charged.
  5. Always unplug the charger when not in use.
Charging cord with a red warning tag that says 'Unplug when not in use'.

Image: The charging cord and adapter, with a warning tag to unplug when not in use.

4.2 General Maintenance Tips

  • Regularly check tire pressure and inflate to the recommended PSI.
  • Inspect brake levers and cables for proper function and adjustment.
  • Keep the bike clean, especially after riding in wet or dirty conditions.
  • Lubricate the chain periodically to ensure smooth operation.
  • Store the bike in a dry place, away from direct sunlight and extreme temperatures.

5. Troubleshooting

This section covers common issues you might encounter with your electric bike.

ProblemPossible CauseSolution
Bike does not power onBattery is low or depleted; Key not fully inserted/turned.Charge the battery; Ensure key is fully inserted and turned to 'ON'.
Motor not assisting (Pedal Assist/Throttle)Battery low; Mode not selected; Brake lever engaged.Charge the battery; Select desired riding mode; Release brake lever.
Brakes feel loose or ineffectiveBrake cables need adjustment; Brake pads worn.Adjust brake cable tension; Inspect and replace brake pads if necessary.
Lights not workingLow battery; Sensor obstructed (headlight); Wiring issue.Charge the battery; Clear any obstructions from the light sensor; Check wiring connections.

6. Specifications

Key technical specifications for your electric bike:

FeatureSpecification
Motor1000W Peak Motor
Max SpeedUp to 22 MPH
Torque45 NM
Battery36V 7.8Ah Lithium (280.8Wh) with BMS 3.0
Charging Time3-4 Hours
Range (Throttle)Up to 15 miles
Range (Pedal Assist)Up to 25 miles
Waterproof RatingIPX4
Tire Size14" x 2.1"
Recommended Height5.2 - 6.4 FT
Ebike Weight49 lbs
Max Load Capacity264 lbs
Frame MaterialSteel
Fork MaterialSteel
Rim MaterialSteel
Braking SystemDrum Brakes
SuspensionFront part
TypeUtility Bicycle
Applicable PeopleUnisex
Diagram showing the dimensions, recommended height, e-bike weight, and max load capacity.

Image: Detailed dimensions and weight specifications of the e-bike.

Exploded view of the 1000W peak motor components, highlighting speed, torque, and acceleration.

Image: Illustration of the 1000W peak motor's capabilities, including 22MPH speed, 45NM torque, and 4S top speed.

Diagram of the 36V Intelligent BMS Battery, showing features like BMS 3.0, 280.8Wh capacity, fast charge, IPX4 waterproof rating, and range.

Image: Features of the 36V Intelligent BMS Battery, including capacity, charging time, and IPX4 waterproof rating.

7. User Tips

  • For maximum battery life, avoid completely draining the battery before recharging.
  • When folding the bike, ensure all latches are securely engaged to prevent accidental unfolding.
  • Utilize Pedal Assist Mode for longer rides to extend battery range.
  • Regularly check the tightness of all bolts and fasteners, especially after the first few rides.
  • Keep the bike's display and controls clean and dry to ensure proper function.

8. Warranty and Support

For detailed warranty information, please refer to the official user manual PDF provided by the manufacturer. You can access the PDF document for further details and support:

User manual (PDF): View PDF

For any technical support or service inquiries, please contact the seller or manufacturer directly through their official channels.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.