1. Introduction
Thank you for purchasing the USB LED Curtain String Lights. This manual provides essential information for the safe and efficient operation of your new lighting product. Please read it thoroughly before use and retain it for future reference.
2. Package Contents
- LED Curtain String Lights
- USB Power Controller
- Infrared Remote Control (battery not included)

Image: Components of the USB LED Curtain String Lights, including the rolled-up light strands, the USB power controller, and the remote control.
3. Setup Instructions
3.1 Remote Control Battery Installation
The remote control requires one CR2025 button cell battery (not included). Please follow these steps to install the battery:
- Locate the battery compartment on the back of the remote control.
- Pull out the battery tray or open the compartment cover.
- Insert one CR2025 battery with the positive (+) side facing up.
- Close the battery compartment securely.
Note: The remote control will only function correctly after the battery is properly installed.
3.2 Light Installation
These curtain lights are designed for versatile decoration. Consider the following for installation:
- Unroll the Lights: Carefully unroll the LED curtain string lights, ensuring the individual strands do not tangle.
- Placement: Hang the main horizontal wire of the curtain lights in your desired location. This can be on a curtain rod, wall hooks, a pergola, or any suitable structure. Ensure the USB cable can reach a power source.
- Arrangement: Let the vertical strands hang freely or arrange them as desired for your decorative effect.

Image: Multicolor LED curtain lights beautifully draped over an outdoor pergola, demonstrating a typical installation scenario.

Image: White LED curtain lights installed indoors, creating an ambient backdrop behind sheer curtains.
3.3 Power Connection
Connect the USB plug of the light string to a compatible 5V USB power source, such as a USB wall adapter, power bank, or computer USB port.
4. Operating Instructions
Your LED curtain lights are controlled via the included infrared remote control. Ensure the remote is pointed towards the USB power controller for optimal signal reception.

Image: Detailed view of the remote control, showing buttons for Power ON/OFF, Timer, 8 lighting modes, and dimming controls.
4.1 Remote Control Functions
| Button | Function |
|---|---|
| ON | Turns the lights ON. |
| OFF | Turns the lights OFF. |
| TIMER | Activates the 6-hour ON, 18-hour OFF cycle. The lights will automatically turn on for 6 hours and then off for 18 hours, repeating daily. |
| MODE (1-8) | Cycles through 8 different lighting modes:
|
| DIM +/- | Adjusts the brightness level of the lights. Use '+' to increase brightness and '-' to decrease brightness. |

Image: Illustrates the 8 distinct lighting modes available, such as Combination, In Wave, Sequential, and Steady On, providing visual examples of each effect.
4.2 Product Demonstration Video
Video: A short demonstration of the LED curtain lights in operation, showcasing various lighting modes and effects.
5. Maintenance
- Cleaning: To clean the lights, gently wipe them with a soft, dry cloth. Do not use liquid cleaners or immerse the lights in water.
- Storage: When not in use, carefully roll up the light strands to prevent tangling. Store them in a cool, dry place away from direct sunlight and extreme temperatures.
- Battery Replacement: Replace the CR2025 battery in the remote control when its performance diminishes.
6. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Lights do not turn on. | No power to the USB controller; remote battery is dead or incorrectly installed. | Ensure the USB plug is securely connected to a working 5V power source. Check and replace the CR2025 battery in the remote control. |
| Remote control is unresponsive. | Remote battery is dead; remote is too far or not pointed at the USB controller. | Replace the CR2025 battery. Ensure the remote is within range and pointed directly at the USB controller. |
| Lights are flickering or dim. | Insufficient power supply; loose connection. | Use a USB power adapter with adequate output (e.g., 5V/1A or higher). Check all connections for tightness. |
7. Specifications
| Feature | Detail |
|---|---|
| Model Number | YAYA |
| Nominal Voltage | 5V |
| Power Source | DC (USB Powered) |
| Luminous Flux | <60 |
| Certification | CE |
| Remote Control Modes | 8 Modes |
| Remote Control Battery | 1x CR2025 (not included) |
| USB Cable Length | Approx. 2.5 meters |
| Dimensions (Width x Height) |
|
| Use | Holiday, Wedding, Home Decoration |
| Origin | Mainland China |

Image: A diagram illustrating the dimensions (width and height), number of strings, and LED count for different available sizes of the curtain lights.

Image: A technical diagram providing precise measurements for the USB controller (5.2cm height) and the remote control (3.9cm width, 8.5cm height), along with the USB cable length (2.5m).
8. User Tips
- For best remote control performance, ensure a clear line of sight to the USB controller and use a fresh CR2025 battery.
- When installing, gently unroll the strands to prevent tangling, which can be time-consuming to undo.
- Consider using a USB wall adapter with at least 1A output for stable and bright illumination, especially for larger light sets.
- The timer function is convenient for daily automated lighting; set it once and enjoy consistent ambiance.
9. Warranty and Support
For any questions, technical support, or warranty inquiries, please contact the seller directly through your purchase platform. Please provide your order number for faster assistance.