CNSPEED P16

Contents

CNSPEED P16 Car OBD2 HUD TFT LCD Color Screen Head Up Display User Manual

Model: P16

1. Introduction

The CNSPEED P16 is an advanced OBD2 Head Up Display (HUD) designed to project essential driving information directly onto your car's windshield. Featuring a TFT LCD multi-color smart display, it provides real-time data such as speed, RPM, water temperature, voltage, and more, enhancing driving safety and convenience. This manual provides detailed instructions for installation, operation, and maintenance of your P16 HUD.

2. Package Contents

Please verify that all items listed below are included in your package:

  • 1x P16 HUD Host Unit
  • 1x Type-C Interface OBD Line
  • 1x Reflective Film
  • 1x Anti-Skid Pad
  • 1x Instruction Manual (this document)
P16 HUD and included accessories
Figure 2.1: P16 HUD and included accessories (OBD cable, reflective film, anti-skid pad, manual).

3. Specifications

Feature Description
Model P16
Display Type TFT LCD Color Screen
Compatibility OBD2 Protocol Cars
Dimensions (L x W x H) 115mm (4.53in) x 72mm (2.83in) x 28mm (1.10in)
Package Dimensions (L x W x H) 23cm x 21cm x 5cm
Package Weight 0.244 kg
Data Displayed Speed, RPM, Water Temperature, Voltage, Time, Fuel Consumption, Average Fuel Consumption, Single Driving Time, Single Driving Mileage, Total Mileage, Intake Temperature, Engine Oil Temperature, Gearbox Temperature, Air-Fuel Ratio, Turbine Pressure, Intake Pressure, Engine Load, Throttle, Acceleration Test, Brake Test, Car Fault Codes (read/clear), Entire Vehicle Data Stream
Alarms Overspeed, Water Temperature, Voltage, Speed, Fatigue Driving Reminder
P16 HUD Dimensions and Buttons
Figure 3.1: Dimensions and button layout of the P16 HUD. The unit measures 115mm (4.53in) in width, 72mm (2.83in) in height, and 28mm (1.10in) in depth. Buttons include Power, Left Click, Right Click, and Function Switch Key.

4. Setup and Installation

The P16 HUD is designed for easy plug-and-play installation in OBD2 protocol cars. Follow these steps for proper setup:

  1. Connect the HUD: Connect the provided Type-C interface OBD line to the HUD unit.
  2. Locate OBD Port: Find your car's OBD2 port, usually located under the dashboard on the driver's side. Plug the other end of the OBD cable into this port. Tidy up the wires to ensure they do not interfere with driving.
  3. Apply Reflective Film (Optional): For optimal display clarity, especially in bright conditions, stick the reflective film on your car's windshield glass where the HUD will project. Ensure the area is clean and dry before application.
  4. Position the HUD: Place the HUD unit on your dashboard in a position that allows for a clear view of the projected information without obstructing your view of the road. The anti-skid pad can be used to secure the unit.
P16 HUD Installation Steps
Figure 4.1: Step-by-step installation guide for the P16 HUD. Steps include connecting the cable, plugging into the OBD port, applying reflective film, and placing the HUD on the dashboard.

Note: No installation guides are included beyond this manual. We highly recommend seeking professional installation if you are unsure about any steps. Any damage during installation will not be refunded.

5. Operating Instructions

The P16 HUD automatically powers on and off with your vehicle's ignition. It features an integrated light-shading design to prevent glare and ensure clear visibility day and night.

5.1. Basic Functions and Display Modes

The HUD displays various real-time driving data and offers multiple display modes that can be switched using the function keys.

  • Data Displayed: Speed, RPM, Water Temperature, Voltage, Time, Fuel Consumption, Average Fuel Consumption, Single Driving Time, Single Driving Mileage, Total Mileage, Intake Temperature, Engine Oil Temperature, Gearbox Temperature, Air-Fuel Ratio, Turbine Pressure, Intake Pressure, Engine Load, Throttle, Acceleration Test, Brake Test, Reading of Car Fault Codes, Clearing of Car Fault Codes, Reading of the Entire Vehicle Data Stream.
  • Multi / Simple Function Display: The display mode can be switched between detailed multi-function views and simpler, focused views.
  • New Functions: Includes an accelerating competitive mode and a brake performance test.
P16 HUD Multiple Display Modes
Figure 5.1: Various display modes of the P16 HUD, including speed, RPM, fuel consumption, water temperature, and voltage. Users can switch between simple and multi-function layouts.
P16 HUD Display Clarity Day and Night
Figure 5.2: P16 HUD display clarity in both day and night driving conditions, demonstrating its adaptive brightness and integrated light-shading design.
P16 HUD Integrated Light-Shading Design
Figure 5.3: P16 HUD installed on a car dashboard, highlighting the integrated light-shading design that blocks screen brightness and prevents glare while driving at night.

5.2. Button Functions

The HUD unit features several buttons for navigation and settings:

  • Power Button: Turns the unit on/off (though it typically auto-powers with ignition).
  • Left Click: Used for navigating menus or decreasing values.
  • Right Click: Used for navigating menus or increasing values.
  • Function Switch Key: Cycles through different display modes or confirms selections in settings.

Refer to the detailed instructions in the included PDF manual for specific button press sequences for accessing and adjusting settings.

5.3. OBD2 Real-Time Data and Alarms

The P16 HUD provides real-time reading of actual driving data and includes several alarm functions to alert the driver to potential issues:

  • Speed Alarm: Alerts when a preset speed limit is exceeded.
  • Voltage Alarm: Warns if the car's voltage drops below a safe level.
  • RPM Alarm: Notifies if engine RPMs exceed a set threshold.
  • Water Temperature Alarm: Alerts to overheating engine conditions.
  • Fatigue Driving Reminder: Prompts the driver to take a break after extended driving periods.
P16 HUD OBD2 Data and Alarms
Figure 5.4: Overview of OBD2 real-time driving data and alarm functions displayed by the P16 HUD, including speed, voltage, RPM, water temperature, fuel consumption, and automatic exposure.

Video 5.1: Demonstration of the CNSPEED P16 HUD in action, showing various display modes and its projection on the windshield during driving.

6. Maintenance

To ensure the longevity and optimal performance of your P16 HUD, follow these maintenance guidelines:

  • Cleaning: Use a soft, dry cloth to clean the HUD unit and the reflective film. Avoid using harsh chemicals or abrasive materials that could scratch the surfaces.
  • Cable Care: Ensure the OBD cable is not pinched or excessively bent, which could damage the internal wiring.
  • Storage: If storing the unit for an extended period, disconnect it from the OBD port and store it in a cool, dry place away from direct sunlight.

7. Troubleshooting

If you encounter issues with your P16 HUD, refer to the following common problems and solutions:

  • No Display:
    • Ensure the OBD cable is securely connected to both the HUD unit and the car's OBD2 port.
    • Check if your car's ignition is on. The HUD typically powers on with the ignition.
    • Verify that your vehicle is OBD2 compliant.
  • Inaccurate Readings:
    • Ensure the HUD is properly calibrated according to the instructions in the full user manual (PDF).
    • Confirm that the correct units (e.g., MPH/KMH) are selected in the settings.
  • Display Glare/Double Image:
    • Adjust the position of the HUD unit on the dashboard.
    • Ensure the reflective film is properly applied to the windshield.
    • Clean the windshield and the HUD's display surface.
  • Alarms Triggering Incorrectly:
    • Check the alarm threshold settings in the HUD menu and adjust them as needed.

For more detailed troubleshooting steps, please consult the comprehensive user manual available in PDF format: P16 HUD User Manual (PDF).

8. User Tips

  • Optimal Placement: Experiment with different positions on your dashboard to find the spot that offers the clearest projection and least obstruction to your view.
  • Reflective Film: While optional, using the reflective film significantly improves visibility, especially in direct sunlight, by reducing ghosting and increasing brightness.
  • Customization: Take time to explore the different display modes and settings to customize the information shown to best suit your driving preferences.

9. Warranty and Support

This product is manufactured by CNSPEED. For any product-related inquiries, technical support, or warranty claims, please refer to the contact information provided by your retailer or the official CNSPEED support channels. Keep your purchase receipt as proof of purchase.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.